Datasheet Linear Technology LTC6915HGN#PBF — Ficha de datos

Hojas de datos

Precios

Embalaje

Paramétricos

Plan ecológico

Notas de Diseño

• Descargar
  Upgrade Your Microcontroller ADC to True 12-Bit Performance &mdash DN463
  PDF, 87 Kb, Archivo publicado: marzo 6, 2009
  Extracto del documento

  Upgrade Your Microcontroller ADC to True 12-Bit Performance
  Design Note DN463
  by Guy Hoover
  Introduction
  Many 8-bit and 16-bit microcontrollers feature 10-bit
  internal ADCs. A few include 12-bit ADCs, but these often
  have poor or nonexistent AC specifications, and certainly
  lack the performance to meet the needs of an increasing
  number of applications. The LTC В®2366 and its slower
  speed versions offer a high performance alternative, as
  shown in the AC specifications in Table 1. Compare these
  guaranteed specifications with the ADC built into your
  current microcontroller.
  This family’s DC specifications are equally impressive. INL
  and DNL are guaranteed to be less than В±1LSB. Operating
  from a single 2.5V, 3V or 3.3V supply, the current draw
  on these parts is a maximum of 4mA during a conversion. This can be reduced to less than 1ОјA by placing
  the part into SLEEP mode during periods of inactivity,
  which greatly reduces the average supply current at lower
  sample rates.
  C3
  0.1ОјF These ADCs are available in tiny 6-lead and 8-lead TSOT23 packages. The 8-lead devices have adjustable VREF
  and OVDD pins. The adjustable VREF pin allows the input …

Artículos

• Descargar
  Simple, Precise Instrumentation Amplifier Features Digitally Programmable Gains from 1 to 4096 &mdash LT Journal
  PDF, 363 Kb, Archivo publicado: marzo 25, 2005
  Extracto del documento

  DESIGN FEATURES Simple, Precise Instrumentation
  Amplifier Features Digitally
  Programmable Gains from 1 to 4096
  by Michael Kultgen Introduction
  The LTCВ®6915 is the simplest, most
  precise way to obtain digitally programmable voltage gain. Any system
  which needs accurate amplification of
  small differential voltages and rejection of large common mode signals will
  benefit from the LTC6915.
  The LTC6915 is an evolution of the
  LTC2053, a precision rail-to-rail input
  and output, zero-drift instrumentation
  amplifier. Due to the amplifier’s very
  low DC errors, very high levels of gain
  can be taken in a single stage. The
  LTC2053 uses external resistors to set
  the gain; the LTC6915 uses a serial
  port or a parallel port to select internal
  resistors, and therefore select the gain.
  The gain can be programmed to 0, 1, 2,
  4, 8, 16, 32, 64, 128, 256, 512, 1024,
  2048, or 4096. Programmable gain
  increases the dynamic range of any …

Linea modelo

Clasificación del fabricante

• Signal Conditioning > Amplifiers > Operational Amplifiers (Op Amps) > Rail-to-Rail Amplifiers
• Signal Conditioning > Amplifiers > Instrumentation Amplifiers | Programmable Gain Amplifiers
• Space & Harsh Environment > Extended Temperature Plastic (H & MP) > Extended Temperature (H & MP) Amplifiers

Otros nombres:

LTC6915HGNPBF, LTC6915HGN PBF