Datasheet Linear Technology LT6012AIGN#PBF — Ficha de datos

Hojas de datos

Precios

Embalaje

Paramétricos

Plan ecológico

Otras opciones

LT6011 LT6011

Artículos

• Descargar
  Low Noise, Micropower Precision Op Amp Swings Outputs from Rail to Rail &mdash LT Journal
  PDF, 253 Kb, Archivo publicado: sept 1, 2003
  Extracto del documento

  DESIGN FEATURES Low Noise, Micropower Precision Op
  Amp Swings Outputs from Rail to Rail
  by Kris Lokere and Glen Brisebois Introduction for the LT6011), the requirement to
  stay 1V away from either rail leaves
  less than 1V for the sensor signal, severely reducing the dynamic range. The
  LT6011 allows the outputs to swing
  to 40mV from either supply rail, making it practical in low supply voltage
  applications.
  In portable instrumentation, medical applications, or in sophisticated
  systems that measure hundreds or
  even thousands of variables simultaneously, the power consumption
  of the precision op amp is important.
  This is especially so because designers
  usually want to burn as much of the
  available power in the sensor itself,
  since this tends to reduce noise. The
  LT6011 suits all these applications
  because the supply current is less
  than 150µA per amplifier—instead
  of the milliamps of other precision
  amplifiers. In addition, micropower
  operation has the obvious benefits
  of increasing battery run time and …

Linea modelo

Clasificación del fabricante

• Signal Conditioning > Amplifiers > Operational Amplifiers (Op Amps) > High Voltage Amplifiers (>12V) | Precision Amplifiers (Vos | Low Power Amplifiers (Is < 1mA/amp) | Low Bias Current Amplifiers (Ib < 100pA) | Rail-to-Rail Amplifiers

Otros nombres:

LT6012AIGNPBF, LT6012AIGN PBF