Datasheet Texas Instruments TMS320F280049M — Ficha de datos

FabricanteTexas Instruments
SerieTMS320F280049M
Datasheet Texas Instruments TMS320F280049M

Piccolo® Microcontrolador

Hojas de datos

TMS320F28004x Piccoloв„ў Microcontrollers datasheet
PDF, 2.7 Mb, Revisión: A, Archivo publicado: agosto 22, 2017
Extracto del documento

Precios

Estado

F280049MPMSF280049MPZSF280049MRSHSXF280049MPMSXF280049MPZS
Estado del ciclo de vidaVista previa (El dispositivo ha sido anunciado pero no está en producción. Las muestras pueden o no estar disponibles)Vista previa (El dispositivo ha sido anunciado pero no está en producción. Las muestras pueden o no estar disponibles)Vista previa (El dispositivo ha sido anunciado pero no está en producción. Las muestras pueden o no estar disponibles)Activo (Recomendado para nuevos diseños)Activo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNoNoNo

Embalaje

F280049MPMSF280049MPZSF280049MRSHSXF280049MPMSXF280049MPZS
N12345
Pin6410010064100
Package TypePMPZRSHPMPZ
Industry STD TermLQFPLQFPLQFPLQFP
JEDEC CodeS-PQFP-GS-PQFP-GS-PQFP-GS-PQFP-G
Package QTY9090909090
CarrierJEDEC TRAY (10+1)JEDEC TRAY (10+1)JEDEC TRAY (10+1)JEDEC TRAY (10+1)
Width (mm)10141014
Length (mm)10141014
Thickness (mm)1.41.41.41.4
Pitch (mm).5.5.5.5
Max Height (mm)1.61.61.61.6
Mechanical DataDescargarDescargarDescargarDescargar

Paramétricos

Parameters / ModelsF280049MPMS
F280049MPMS
F280049MPZS
F280049MPZS
F280049MRSHS
F280049MRSHS
XF280049MPMS
XF280049MPMS
XF280049MPZS
XF280049MPZS
ADC, Ch21,14,1221,14,1221,14,1221,14,1221,14,12
ADC Resolution12-bit12-bit12-bit12-bit12-bit
CAN22222
CPUC28x,CLAC28x,CLAC28x,CLAC28x,CLAC28x,CLA
Comparators7,6,57,6,57,6,57,6,57,6,5
DMA, Ch66666
FPUYesYesYesYesYes
Flash, KB256256256256256
Frequency, MHz100100100100100
High Resolution PWM, Ch1616161616
I2C11111
Operating Temperature Range, C-40 to 125-40 to 125-40 to 125-40 to 125-40 to 125
PGA/VGA7,5,47,5,47,5,47,5,47,5,4
PM Bus11111
PWM, Ch1616161616
Pin/Package100LQFP, 64LQFP100LQFP, 64LQFP100LQFP, 64LQFP100LQFP, 64LQFP100LQFP, 64LQFP
QEP2,12,12,12,12,1
RAM, KB100100100100100
SPI22222
Sigma-Delta Filter4,34,34,34,34,3
Total Processing, MIPS200200200200200
UART, SCI22222

Plan ecológico

F280049MPMSF280049MPZSF280049MRSHSXF280049MPMSXF280049MPZS
RoHSSee ti.comSee ti.comDesobedienteSee ti.comSee ti.com

Notas de aplicación

  • A Technical Introduction to the TMS320F28004x Microcontroller
    PDF, 549 Kb, Archivo publicado: marzo 23, 2017
    While many real-time control systems require a high-performance microcontroller (MCU), the tradeoffs of balancing performance and cost can be challenging. To this end, Texas Instruments developed the Piccoloв„ў TMS320F28004x MCU device series. This document discusses the technical details of the TMS320F28004x architecture and highlights the new improvements to various key peripherals, such as
  • Calculating Useful Lifetimes of Embedded Processors
    PDF, 521 Kb, Archivo publicado: nov 11, 2014
    This application report provides a methodology for calculating the useful lifetime of TI embedded processors (EP) under power when used in electronic systems. It is aimed at general engineers who wish to determine if the reliability of the TI EP meets the end system reliability requirement.
  • TMS320C28x FPU Primer (Rev. A)
    PDF, 228 Kb, Revisión: A, Archivo publicado: jul 20, 2009
    This primer provides an overview of the floating-point unit (FPU) in the C2000в„ў Delfino microcontroller devices.
  • Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x (Rev. A)
    PDF, 381 Kb, Revisión: A, Archivo publicado: sept 9, 2008
    This application report presents a method for utilizing the on-chip pulse width modulated (PWM) signal generators on the TMS320F280xв„ў family of digital signal controllers as a digital-to-analog converter (DAC). The method involves analog low-pass filtering the PWM signal to remove high frequency components, leaving only the low-frequency content. Theoretical and experimental results are presented
  • Running an Application from Internal Flash Memory on the TMS320F28xxx DSP (Rev. L)
    PDF, 641 Kb, Revisión: L, Archivo publicado: feb 28, 2013
    Several special requirements exist for running an application from on-chip Flash memory on the TMS320F28xxx. These requirements generally do not manifest themselves during code development in RAM since the Code Composer Studioв„ў (CCS) debugger can mask problems associated with initialized sections and their linkage in memory. This application report covers the application software modificatio
  • Programming TMS320x28xx and 28xxx Peripherals in C/C++ (Rev. D)
    PDF, 530 Kb, Revisión: D, Archivo publicado: feb 27, 2013
    This application report explores a hardware abstraction layer implementation to make C/C++ coding easier on C28x devices. This method is compared to traditional #define macros and topics of code efficiency and special case registers are also addressed.
  • Serial Flash Programming of C2000 Microcontrollers (Rev. B)
    PDF, 387 Kb, Revisión: B, Archivo publicado: feb 8, 2017
    Often times, embedded processors must be programmed in situations where JTAG is not a viable optionfor programming the target device. When this is the case, the engineer must rely on some type of serial programming solution. C2000 devices aid in this endeavor through their inclusion of several program loading utilities included in ROM. These utilities are useful, but only solve half of the progr
  • Accelerators: Enhancing the Capabilities of the C2000 MCU Family Technical Brief (Rev. A)
    PDF, 155 Kb, Revisión: A, Archivo publicado: nov 8, 2016
    Engineers designing real-time control systems are constantly faced with the challenge of optimizing performance. These systems require minimal processing latency in order to meet the control loop performance specifications. At the heart of the control systems are math intensive algorithms which are used to calculate the control signals. Utilizing a microcontroller (MCU) that can quickly and effici
  • Calculator for CAN Bit Timing Parameters
    PDF, 37 Kb, Archivo publicado: marzo 22, 2016
    Controller Area Network (CAN) nodes use user-specified timing parameters to sample the asynchronous bitstream and recover the clock. These parameters are typically based on the frequency of the available reference oscillator. There may be several options available for a given frequency, and some of them will allow a looser oscillator tolerance than others. This application report details the creat

Linea modelo

Clasificación del fabricante

  • Semiconductors> Microcontrollers (MCU)> Performance MCUs> Real-time Control> Piccolo F2802x/3x/5x/6x/7x