Datasheet Analog Devices OP284EPZ — Ficha de datos

Precision Rail-to-Rail
Input and Output Operational Amplifiers
OP184/OP284/OP484
FEATURES PIN CONFIGURATIONS Single-supply operation
Wide bandwidth: 4 MHz
Low offset voltage: 65 μV
Unity-gain stable
High slew rate: 4.0 V/ μs
Low noise: 3.9 nV/√Hz DNC 1 –IN A 2 OP184 8 NC 7 V+ 6 OUT A 5 DNC – +IN A 3 V– 4 TOP VIEW
(Not to Scale) 00293-001 + NOTES
1. NC = NO CONNECT
2. DNC = DO NOT CONNECT APPLICATIONS Figure 1. 8-Lead SOIC (S-Suffix) GENERAL DESCRIPTION These amplifiers are superb for single-supply applications requiring
both ac and precision dc performance. The combination of wide
bandwidth, low noise, and precision makes the OP184/OP284/
OP484 useful in a wide variety of applications, including filters
and instrumentation.
Other applications for these amplifiers include portable telecommunications equipment, power supply control and protection,
and use as amplifiers or buffers for transducers with wide output
ranges. Sensors requiring a rail-to-rail input amplifier include
Hall effect, piezoelectric, and resistive transducers. 1 OP284 8 V+
OUT B –IN A 2 7 +IN A 3 6 –IN B V– 4 5 +IN B TOP VIEW
(Not to Scale) Figure 2. 8-Lead PDIP (P-Suffix)
8-Lead SOIC (S-Suffix) …

Data Sheet Precision Rail-to-Rail
Input and Output Operational Amplifier
OP284CHIPS FEATURES OP284 CHIP DIMENSIONS AND PAD LAYOUT Rail-to-rail output
Gain bandwidth product: 4 MHz typical
Low offset voltage: 175 μV
Unity-gain stable
High slew rate: 4.0 V/μs typical
Low noise: 3.9 nV/√Hz typical 63.9 mils V+ OUT A GENERAL DESCRIPTION OUT B The OP284 die is available only through this specification.
–IN A 90.6 mils The OP284 is a dual operational amplifier, featuring a 4 MHz
bandwidth and rail-to-rail inputs and outputs. It is guaranteed
to operate in single-supply from 3 V to 36 V, or dual-supply
from ±1.5 V to ±18 V. +IN A This amplifier is superb for single-supply applications requiring
both ac and precision dc performance. The combination of
wide bandwidth, low noise, and precision makes the OP284
useful in a wide variety of applications, including filters and
instrumentation.
For application information, please refer to the OP284 package
product data sheet and webpage. –IN B V– +IN B 12642-001 The OP284CHIPS die is specified for 25°C operations only.
Figure 1. OP284 Metal Mask Die Image Table 1. Die Physical Characteristics
Parameter
Die Size
Back Grind Thickness
Bond Pad Opening Size …

FEATURES PIN CONNECTION DIAGRAM Single-supply operation
Wide bandwidth: 4.25 MHz
Low offset voltage: 100 μV
Unity-gain stable
High slew rate: 4.0 V/μs
Low noise: 3.9 nV/√Hz OUT A 1 8 V+ –IN A 2 7 OUT B +IN A 3 6 –IN B V– 4 5 +IN B OP284-EP
TOP VIEW
(Not to Scale) 12562-001 Enhanced Product Precision RRI0 Dual Operational Amplifier
OP284-EP Figure 1. ENHANCED PRODUCT FEATURES
Supports defense and aerospace applications (AQEC standard)
Military temperature range (−55°C to +125°C)
Controlled manufacturing baseline
1 assembly/test site
1 fabrication site
Enhanced product change notification
Qualification data available on request APPLICATIONS
Battery-powered instrumentation
Power supply control and protection
Telecommunications
DAC output amplifier
ADC input buffer GENERAL DESCRIPTION
The OP284-EP is a dual, single-supply, 4.25 MHz bandwidth
amplifier featuring rail-to-rail inputs and outputs (RRIO). …