Datasheet Texas Instruments THS8200 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | THS8200 |
Triple DAC de video de 10 bits con todos los formatos
Hojas de datos
THS8200 All-Format Oversampled Component Video/PC Graphics D/A System With Three 11-Bit DACs, CGMS Data Insertion datasheet
PDF, 1.1 Mb, Revisión: E, Archivo publicado: sept 18, 2014
Extracto del documento
Precios
Estado
| THS8200PFP | |
|---|---|
| Estado del ciclo de vida | NRND (No recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| THS8200PFP | |
|---|---|
| N | 1 |
| Pin | 80 |
| Package Type | PFP |
| Industry STD Term | HTQFP |
| JEDEC Code | S-PQFP-G |
| Package QTY | 96 |
| Carrier | JEDEC TRAY (10+1) |
| Device Marking | THS8200 |
| Width (mm) | 12 |
| Length (mm) | 12 |
| Thickness (mm) | 1 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Descargar |
Plan ecológico
| THS8200PFP | |
|---|---|
| RoHS | Obediente |
Notas de aplicación
- THS8200 PCB Layout GuidelinesPDF, 40 Kb, Archivo publicado: jun 16, 2010
- Analog Reconstruction Filter for HDTV Using THS8133, THS8134, THS8135, THS8200PDF, 58 Kb, Archivo publicado: sept 14, 2001
The THS8133, THS8134, THS8135, and the THS8200 devices are part of a family of chips for graphics and video applications, which contain triple DACs that operate from 80 MSPS to 240 MSPS. For television applications, an analog low-pass filter is required to reconstruct the signal that is input to the monitor. High definition television (HDTV) requires a sampling frequency of 74.25 MHz and has pass- - High Resolution Video Using the DM642 DSP and the THS8200 Driver (Rev. A)PDF, 440 Kb, Revisión: A, Archivo publicado: mayo 3, 2004
The DM642 DSP has three 20-bit video ports capable of high definition (HD) display. The video ports can be programmed to follow HDTV standards, such as SMPTE274M and SMPTE296M. These HDTV standards follow a 4:2:2 convention where luminance and chrominance signals are separated onto two different 8- or 10-bit data paths. This convention is more commonly called Y/C mode. Many new HD displays accept - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Linea modelo
Serie: THS8200 (1)
Clasificación del fabricante
- Semiconductors> Video and Imaging> Video DACs