Datasheet Texas Instruments THS6132 — Ficha de datos

Fabricante	Texas Instruments
Serie	THS6132

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Parameters / Models	THS6132RGWR	THS6132VFP	THS6132VFPG4
2nd Harmonic, dBc		84
2nd Harmonic(dBc)	84		84
3rd Harmonic, dBc		92
3rd Harmonic(dBc)	92		92
@ MHz	1	1	1
Acl, min spec gain, V/V		1
Acl, min spec gain(V/V)	1		1
Additional Features	N/A	N/A	N/A
Approx. Price (US$)	4.55 | 100u		4.55 | 100u
Architecture	Current FB	Current FB	Current FB
BW @ Acl, MHz		80
BW @ Acl(MHz)	80		80
CMRR(Min), dB		60
CMRR(Min)(dB)	60		60
CMRR(Typ), dB		67
CMRR(Typ)(dB)	67		67
GBW(Typ), MHz		80
GBW(Typ)(MHz)	80		80
Input Bias Current(Max), pA		15000000
Input Bias Current(Max)(pA)	15000000		15000000
Iq per channel(Max), mA		7.5
Iq per channel(Max)(mA)	7.5		7.5
Iq per channel(Typ), mA		6.4
Iq per channel(Typ)(mA)	6.4		6.4
Number of Channels		2
Number of Channels(#)	2		2
Offset Drift(Typ), uV/C		40
Offset Drift(Typ)(uV/C)	40		40
Operating Temperature Range, C		-40 to 85
Operating Temperature Range(C)	-40 to 85		-40 to 85
Output Current(Typ), mA		500
Output Current(Typ)(mA)	500		500
Package Group	VQFN	HLQFP	HLQFP
Package Size: mm2:W x L, PKG		32HLQFP: 81 mm2: 9 x 9(HLQFP)
Package Size: mm2:W x L (PKG)	20VQFN: 25 mm2: 5 x 5(VQFN)		32HLQFP: 81 mm2: 9 x 9(HLQFP)
Rail-to-Rail	No	No	No
Rating	Catalog	Catalog	Catalog
Slew Rate(Typ), V/us		300
Slew Rate(Typ)(V/us)	300		300
Total Supply Voltage(Max), +5V=5, +/-5V=10		33
Total Supply Voltage(Max)(+5V=5, +/-5V=10)	33		33
Total Supply Voltage(Min), +5V=5, +/-5V=10		6
Total Supply Voltage(Min)(+5V=5, +/-5V=10)	6		6
Vn at 1kHz(Typ), nV/rtHz		4.3
Vn at Flatband(Typ), nV/rtHz		3.5
Vn at Flatband(Typ)(nV/rtHz)	3.5		3.5
Vos (Offset Voltage @ 25C)(Max), mV		15
Vos (Offset Voltage @ 25C)(Max)(mV)	15		15

Plan ecológico

Notas de aplicación

• Descargar
  Active Output Impedance for ADSL Line Drivers
  PDF, 636 Kb, Archivo publicado: nov 26, 2002
  Signal termination is very common in bidirectional communication systems. Termination allows for receiving signals while transmitting different signals at the same time. With the increasing popularity of asymmetrical digital subscriber lines (ADSL), the requirement for a low power line driver amplifier combined with line termination becomes a very difficult goal. This application note examines the
• Descargar
  Noise Analysis for High Speed Op Amps (Rev. A)
  PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
  As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Linea modelo

Clasificación del fabricante

• Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> High-Speed Op Amps (>=50MHz)