Datasheet Texas Instruments THS4532 — Ficha de datos
Fabricante | Texas Instruments |
Serie | THS4532 |
Amplificador dual, ultra bajo de potencia 0.25mA, RRO, totalmente diferencial
Hojas de datos
THS4532 Ultra Low Power, Rail-to-Rail Output, Fully-Differential Amplifier datasheet
PDF, 2.0 Mb, Revisión: A, Archivo publicado: jul 31, 2015
Extracto del documento
Precios
Estado
THS4532IPW | THS4532IPWR | |
---|---|---|
Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
Disponibilidad de muestra del fabricante | No | Sí |
Embalaje
THS4532IPW | THS4532IPWR | |
---|---|---|
N | 1 | 2 |
Pin | 16 | 16 |
Package Type | PW | PW |
Industry STD Term | TSSOP | TSSOP |
JEDEC Code | R-PDSO-G | R-PDSO-G |
Package QTY | 90 | 2000 |
Carrier | TUBE | LARGE T&R |
Device Marking | THS4532 | THS4532 |
Width (mm) | 4.4 | 4.4 |
Length (mm) | 5 | 5 |
Thickness (mm) | 1 | 1 |
Pitch (mm) | .65 | .65 |
Max Height (mm) | 1.2 | 1.2 |
Mechanical Data | Descargar | Descargar |
Paramétricos
Parameters / Models | THS4532IPW | THS4532IPWR |
---|---|---|
2nd Harmonic, dBc | 128 | 128 |
3rd Harmonic, dBc | 137 | 137 |
@ MHz | 0.01 | 0.01 |
Acl, min spec gain, V/V | 1 | 1 |
Additional Features | Shutdown | Shutdown |
Architecture | Fully Differential,Voltage FB | Fully Differential,Voltage FB |
BW @ Acl, MHz | 36 | 36 |
CMRR(Min), dB | 90 | 90 |
CMRR(Typ), dB | 116 | 116 |
GBW(Typ), MHz | 27 | 27 |
Input Bias Current(Max), pA | 250000 | 250000 |
Iq per channel(Max), mA | 0.35 | 0.35 |
Iq per channel(Typ), mA | 0.25 | 0.25 |
Number of Channels | 2 | 2 |
Offset Drift(Typ), uV/C | 3 | 3 |
Operating Temperature Range, C | -40 to 125 | -40 to 125 |
Output Current(Typ), mA | 26 | 26 |
Package Group | TSSOP | TSSOP |
Package Size: mm2:W x L, PKG | 16TSSOP: 32 mm2: 6.4 x 5(TSSOP) | 16TSSOP: 32 mm2: 6.4 x 5(TSSOP) |
Rail-to-Rail | In to V-,Out | In to V-,Out |
Rating | Catalog | Catalog |
Slew Rate(Typ), V/us | 220 | 220 |
Total Supply Voltage(Max), +5V=5, +/-5V=10 | 5.5 | 5.5 |
Total Supply Voltage(Min), +5V=5, +/-5V=10 | 2.5 | 2.5 |
Vn at 1kHz(Typ), nV/rtHz | 10 | 10 |
Vn at Flatband(Typ), nV/rtHz | 10 | 10 |
Vos (Offset Voltage @ 25C)(Max), mV | 0.4 | 0.4 |
Plan ecológico
THS4532IPW | THS4532IPWR | |
---|---|---|
RoHS | Obediente | Obediente |
Notas de aplicación
- Using fully differential op amps as attenuators, Part 1PDF, 554 Kb, Archivo publicado: mayo 1, 2009
- Using fully differential op amps as attenuators, Part 3PDF, 568 Kb, Archivo publicado: oct 4, 2009
- Using fully differential op amps as attenuators, Part 2PDF, 531 Kb, Archivo publicado: jul 14, 2009
- Analysis of fully differential amplifiersPDF, 295 Kb, Archivo publicado: marzo 11, 2005
- Fully-Differential Amplifiers (Rev. E)PDF, 867 Kb, Revisión: E, Archivo publicado: sept 19, 2016
Differential signaling has been commonly used in audio, data transmission, and telephone systems for many years because of its inherent resistance to external noise sources. Today, differential signaling is becoming popular in high-speed data acquisition, where the ADC’s inputs are differential and a differential amplifier is needed to properly drive them.Two other advantages of di - Designing for low distortion with high-speed op ampsPDF, 277 Kb, Archivo publicado: marzo 2, 2005
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Linea modelo
Serie: THS4532 (2)
Clasificación del fabricante
- Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> High-Speed Op Amps (>=50MHz)