Datasheet Texas Instruments THS4001 — Ficha de datos

FabricanteTexas Instruments
SerieTHS4001
Datasheet Texas Instruments THS4001

Amplificador de retroalimentación de voltaje de 270 MHz

Hojas de datos

270-MHz High-Speed Voltage-Feedback Amplifier datasheet
PDF, 879 Kb, Revisión: A, Archivo publicado: marzo 25, 1999
Extracto del documento

Precios

Estado

THS4001CDTHS4001CDG4THS4001CDRTHS4001IDTHS4001IDG4
Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)Activo (Recomendado para nuevos diseños)Activo (Recomendado para nuevos diseños)Activo (Recomendado para nuevos diseños)Activo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

THS4001CDTHS4001CDG4THS4001CDRTHS4001IDTHS4001IDG4
N12345
Pin88888
Package TypeDDDDD
Industry STD TermSOICSOICSOICSOICSOIC
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY757525007575
CarrierTUBETUBELARGE T&RTUBETUBE
Device Marking4001C4001C4001C4001I4001I
Width (mm)3.913.913.913.913.91
Length (mm)4.94.94.94.94.9
Thickness (mm)1.581.581.581.581.58
Pitch (mm)1.271.271.271.271.27
Max Height (mm)1.751.751.751.751.75
Mechanical DataDescargarDescargarDescargarDescargarDescargar

Paramétricos

Parameters / ModelsTHS4001CD
THS4001CD
THS4001CDG4
THS4001CDG4
THS4001CDR
THS4001CDR
THS4001ID
THS4001ID
THS4001IDG4
THS4001IDG4
2nd Harmonic, dBc6565656565
3rd Harmonic, dBc6262626262
@ MHz55555
Acl, min spec gain, V/V11111
Additional FeaturesN/AN/AN/AN/AN/A
ArchitectureBipolar,Voltage FBBipolar,Voltage FBBipolar,Voltage FBBipolar,Voltage FBBipolar,Voltage FB
BW @ Acl, MHz270270270270270
CMRR(Min), dB8585858585
CMRR(Typ), dB100100100100100
GBW(Typ), MHz270270270270270
Input Bias Current(Max), pA50000005000000500000050000005000000
Iq per channel(Max), mA9.59.59.59.59.5
Iq per channel(Typ), mA7.87.87.87.87.8
Number of Channels11111
Operating Temperature Range, C-40 to 85,0 to 70-40 to 85,0 to 70-40 to 85,0 to 70-40 to 85,0 to 70-40 to 85,0 to 70
Output Current(Typ), mA100100100100100
Package GroupSOICSOICSOICSOICSOIC
Package Size: mm2:W x L, PKG8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)
Rail-to-RailNoNoNoNoNo
RatingCatalogCatalogCatalogCatalogCatalog
Slew Rate(Typ), V/us400400400400400
Total Supply Voltage(Max), +5V=5, +/-5V=103030303030
Total Supply Voltage(Min), +5V=5, +/-5V=1055555
Vn at 1kHz(Typ), nV/rtHz12.512.512.512.512.5
Vn at Flatband(Typ), nV/rtHz12.512.512.512.512.5
Vos (Offset Voltage @ 25C)(Max), mV88888

Plan ecológico

THS4001CDTHS4001CDG4THS4001CDRTHS4001IDTHS4001IDG4
RoHSObedienteObedienteObedienteObedienteObediente

Notas de aplicación

  • Driving Capacitance with the THS4001
    PDF, 51 Kb, Archivo publicado: feb 25, 1999
    Operational amplifiers (op amps) are often used to drive devices that have significant input capacitance such as analog-to-digital converters, cables, MOSFETs, filter networks, etc. The effect of the capacitance is extra phase shift in the loop gain of the amplifier. This phase shift erodes the phase margin of the amplifier and may lead to instability. At high frequency, even a very small capacita
  • THS4001 SPICE Model Performance
    PDF, 149 Kb, Archivo publicado: oct 14, 1999
    This document outlines the SPICE model of the THS4001 high-speed monolithic operational amplifier. General information about the model file structure, performance comparison, model listing, and a brief comment about symbols are included. The listing can be copied and pasted into an ASCII editor, or it can be down loaded by visiting the THS4001 product folder at http://www.ti.com/sc/docs/products/a
  • 10-MHz Butterworth Filter Using the Operational Amplifier THS4001
    PDF, 248 Kb, Archivo publicado: oct 28, 1999
    This application report describes the design of an active 10-MHz second-order Butterworth low-pass filter useful for band-limiting applications. As an active component, TI's operational amplifier type THS4001, which has a bandwidth of 300 MHz, was used. The design of the filter described in this report is typical of proactical applications, and the steps involved in calculating component values ca
  • Using References to Generate Offsets for the TLC55xx Family Data Converters (Rev. A)
    PDF, 72 Kb, Revisión: A, Archivo publicado: jul 29, 2002
    This application report describes the process for using references to generate offsets for Texas Instrument?s TLC55XX family data converters.
  • Voltage Feedback vs. Current Feedback Op Amps
    PDF, 93 Kb, Archivo publicado: nov 30, 1998
    This application report contrasts and compares the characteristics and capabilities of voltage and current feedback operational amplifiers. The report also points out the many similarities between the two versions.
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Linea modelo

Clasificación del fabricante

  • Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> High-Speed Op Amps (>=50MHz)