Datasheet Texas Instruments THS3096 — Ficha de datos

Fabricante	Texas Instruments
Serie	THS3096

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Parameters / Models	THS3096D	THS3096PWP
2nd Harmonic, dBc	66	66
3rd Harmonic, dBc	76	76
@ MHz	10	10
Acl, min spec gain, V/V	1	1
Additional Features	Shutdown	Shutdown
Architecture	Bipolar,Current FB	Bipolar,Current FB
BW @ Acl, MHz	145	145
CMRR(Min), dB	68	68
CMRR(Typ), dB	78	78
GBW(Typ), MHz	145	145
Input Bias Current(Max), pA	15000000	15000000
Iq per channel(Max), mA	10.5	10.5
Iq per channel(Typ), mA	9.5	9.5
Number of Channels	2	2
Offset Drift(Typ), uV/C	10	10
Operating Temperature Range, C	-40 to 85	-40 to 85
Output Current(Typ), mA	250	250
Package Group	SOIC	HTSSOP
Package Size: mm2:W x L, PKG	14SOIC: 52 mm2: 6 x 8.65(SOIC)	14HTSSOP: 32 mm2: 6.4 x 5(HTSSOP)
Rail-to-Rail	No	No
Rating	Catalog	Catalog
Slew Rate(Typ), V/us	5700	5700
Total Supply Voltage(Max), +5V=5, +/-5V=10	30	30
Total Supply Voltage(Min), +5V=5, +/-5V=10	10	10
Vn at 1kHz(Typ), nV/rtHz	2	2
Vn at Flatband(Typ), nV/rtHz	2	2
Vos (Offset Voltage @ 25C)(Max), mV	3	3

Plan ecológico

Notas de aplicación

• Descargar
  Design for a Wideband Differential Transimpedance DAC Output (Rev. A)
  PDF, 438 Kb, Revisión: A, Archivo publicado: oct 17, 2016
  High-speed digital-to-analog converters commonly offer a complementary current output signal. Most output interface implementations use either a resistive load and/or a transformer to convert this current source signal to a voltage. Where a dc-coupled interface is required, a carefully designed differential transimpedance stage can offer an attractive alternative. Design considerations and options
• Descargar
  Voltage Feedback vs. Current Feedback Op Amps
  PDF, 93 Kb, Archivo publicado: nov 30, 1998
  This application report contrasts and compares the characteristics and capabilities of voltage and current feedback operational amplifiers. The report also points out the many similarities between the two versions.
• Descargar
  Stabilizing Current-Feedback Op Amps While Optimizing Circuit Performance
  PDF, 280 Kb, Archivo publicado: abr 28, 2004
  Optimizing a circuit design with a current-feedback (CFB) op amp is a relatively straightforward task, once one understands how CFB op amps achieve stability. This application note explains a 2nd-order CFB model so that any designer can better understand the flexibility of the CFB op amp. This report also discusses stability analysis, the effects of parasitic components due to PCBs, optimization
• Descargar
  Designing for low distortion with high-speed op amps
  PDF, 277 Kb, Archivo publicado: marzo 2, 2005
• Descargar
  Noise Analysis for High Speed Op Amps (Rev. A)
  PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
  As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Linea modelo

Clasificación del fabricante

• Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> High-Speed Op Amps (>=50MHz)