Datasheet Texas Instruments TAS5122 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | TAS5122 |
Etapa de potencia del amplificador digital estéreo de 50 W
Hojas de datos
TAS5122: 30-W Stereo Digital Amplifier Power Stage datasheet
PDF, 775 Kb, Revisión: E, Archivo publicado: dic 15, 2004
Extracto del documento
Precios
Estado
| TAS5122DCA | TAS5122DCAR | TAS5122DCARG4 | |
|---|---|---|---|
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No | No | No |
Embalaje
| TAS5122DCA | TAS5122DCAR | TAS5122DCARG4 | |
|---|---|---|---|
| N | 1 | 2 | 3 |
| Pin | 56 | 56 | 56 |
| Package Type | DCA | DCA | DCA |
| Industry STD Term | HTSSOP | HTSSOP | HTSSOP |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 35 | 2000 | 2000 |
| Carrier | TUBE | LARGE T&R | LARGE T&R |
| Device Marking | TAS5122 | TAS5122 | TAS5122 |
| Width (mm) | 6.1 | 6.1 | 6.1 |
| Length (mm) | 14 | 14 | 14 |
| Thickness (mm) | 1.15 | 1.15 | 1.15 |
| Pitch (mm) | .5 | .5 | .5 |
| Max Height (mm) | 1.2 | 1.2 | 1.2 |
| Mechanical Data | Descargar | Descargar | Descargar |
Paramétricos
| Parameters / Models | TAS5122DCA | TAS5122DCAR | TAS5122DCARG4 |
|---|---|---|---|
| Audio Input Type | PWM | PWM | PWM |
| Control Interface | Hardware | Hardware | Hardware |
| Operating Temperature Range, C | 0 to 70 | 0 to 70 | 0 to 70 |
| Output Power, W | 30 | 30 | 30 |
| Power Stage Supply(Max), V | 25.5 | 25.5 | 25.5 |
| Power to Bridge Tied Load(Max), W | 37 | 37 | 37 |
| SNR, dB | 95 | 95 | 95 |
| Speaker Channels, Max | 2 | 2 | 2 |
| THD + N @ 1 kHz, % | 0.05 | 0.05 | 0.05 |
Plan ecológico
| TAS5122DCA | TAS5122DCAR | TAS5122DCARG4 | |
|---|---|---|---|
| RoHS | Obediente | Obediente | Obediente |
Notas de aplicación
- TAS5001-5122C2EVM Application Report (Rev. A)PDF, 1.4 Mb, Revisión: A, Archivo publicado: abr 14, 2008
- TAS5028-5122C6EVM Application ReportPDF, 1.5 Mb, Archivo publicado: enero 17, 2005
- TAS5508-5122C6EVM Application Report (Rev. A)PDF, 1.5 Mb, Revisión: A, Archivo publicado: abr 26, 2006
- Voltage Spike Measurement Technique and Specification (Rev. A)PDF, 179 Kb, Revisión: A, Archivo publicado: nov 13, 2003
As an extension to the voltage ratings given in the Absolute Maximum Ratings section of the TAS5111, TAS5112, TAS5121, and TAS5122 data sheets, this application note gives a more explicit description of the maximum limit for peak voltage vs. time on the BST and OUT pins. Additionally, a measurement technique and test setup is described and application design guidelines given on how to avoid exceed - Power Supply Recommendations for DVD ReceiversPDF, 153 Kb, Archivo publicado: mayo 4, 2005
Selecting the optimal power supply for a non feed back digital amplifier can bechallenging. Music is dynamic, so the power consumption is changing dramatically,from almost zero to maximum within a few ms.Designing the power supply so powerful that it can deliver the total amplifier outputpower continuously is too costly and usually unnecessary.Designing the power supply too small gives p - PSRR for Purepath Digital Audio AmplifiersPDF, 159 Kb, Archivo publicado: abr 15, 2005
- AN-1737 Managing EMI in Class D Audio Applications (Rev. A)PDF, 140 Kb, Revisión: A, Archivo publicado: mayo 1, 2013
Electromagnetic interference (EMI) is an unwanted disturbance caused in an electrical circuit byelectromagnetic radiation emitted from an external source. The disturbance may interrupt, obstruct, orotherwise degrade the effective performance of the circuit. - AN-1849 An Audio Amplifier Power Supply Design (Rev. B)PDF, 1.9 Mb, Revisión: B, Archivo publicado: mayo 1, 2013
This application report provides design information for a power supply for use with our newest offering of high-performance, ultra high-fidelity audio amplifier input stage ICs. - Guidelines for Measuring Audio Power Amplifier PerformancePDF, 765 Kb, Archivo publicado: oct 30, 2001
This application note provides guidelines for measuring the date sheet parameters of Texas Instruments audio power amplifiers (APAs) using prefabricated evaluation modules (EVMs). The primary equipment used for the measurements consists of the System Two audio measurement system by Audio Precision , a digital multimeter (DMM), and a dc power supply.
Linea modelo
Serie: TAS5122 (3)
Clasificación del fabricante
- Semiconductors> Audio> High-Power Audio Amplifiers (>50W)> PWM Input Class-D