Datasheet Texas Instruments SN74FB2031RCRG3 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | SN74FB2031 |
| Numero de parte | SN74FB2031RCRG3 |
Transceptor de datos / dirección TTL / BTL de 9 bits 52-QFP 0 a 70
Hojas de datos
9-Bit TTL/BTL Address/Data Transceiver datasheet
PDF, 695 Kb, Revisión: N, Archivo publicado: jun 22, 2001
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 52 |
| Package Type | RC |
| Industry STD Term | QFP |
| JEDEC Code | S-PQFP-G |
| Package QTY | 500 |
| Carrier | LARGE T&R |
| Device Marking | FB2031 |
| Width (mm) | 10 |
| Length (mm) | 10 |
| Thickness (mm) | 2 |
| Pitch (mm) | .65 |
| Max Height (mm) | 2.45 |
| Mechanical Data | Descargar |
Paramétricos
| Bits | 9 |
| F @ Nom Voltage(Max) | 150 Mhz |
| ICC @ Nom Voltage(Max) | 78 mA |
| Operating Temperature Range | 0 to 70 C |
| Output Drive (IOL/IOH)(Max) | 100/-32 mA |
| Package Group | QFP |
| Package Size: mm2:W x L | 52QFP: 174 mm2: 13.2 x 13.2(QFP) PKG |
| Rating | Catalog |
| Schmitt Trigger | No |
| Technology Family | FB |
| VCC(Max) | 5.5 V |
| VCC(Min) | 4.5 V |
| Voltage(Nom) | 5 V |
| tpd @ Nom Voltage(Max) | 7.8 ns |
Plan ecológico
| RoHS | Obediente |
Notas de aplicación
- Next-Generation BTL/Futurebus Transceivers Allow Single-Sided SMT Manufacturing (Rev. C)PDF, 65 Kb, Revisión: C, Archivo publicado: marzo 1, 1997
BTL- and Futurebus-compatible transceivers and switching level meet the requirements of today?s high-speed data-communications and provide significant performance advantages over conventional backplane implementations. This document discusses the current and next generation of BTL/Futurebus Transceivers and the design trade-offs required when using these devices. - GTL/BTL: A Low-Swing Solution for High-Speed Digital Logic (Rev. A)PDF, 184 Kb, Revisión: A, Archivo publicado: marzo 1, 1997
GTL and BTL transceivers provide high-performance, excellent signal integrity and cost-effectiveness in high-speed backplane and point-to-point applications. This document discusses the GTL and BTL devices input/output (I/O) structure, power consumption, simultaneous switching, slew rate, and signal integrity. Design considerations for using these devices are provided. - Power-Up 3-State (PU3S) Circuits in TI Standard Logic DevicesPDF, 209 Kb, Archivo publicado: mayo 10, 2002
Many telecom and networking applications require that cards be inserted and extracted from a live backplane without interrupting data or damaging components. To achieve this interface terminals of the card must be electrically isolated from the bus system during insertion or extraction from the backplane. To facilitate this Texas Instruments provides bus-interface and logic devices with features
Linea modelo
Serie: SN74FB2031 (2)
- SN74FB2031RCG3 SN74FB2031RCRG3
Clasificación del fabricante
- Semiconductors > Logic > Backplane Logic (GTL/TTL/BTL/ECL Transceiver/Translator)