Datasheet Texas Instruments PGA300 — Ficha de datos

Fabricante	Texas Instruments
Serie	PGA300

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Parameters / Models	PGA300ARHHR	PGA300ARHHT
# Input Channels	2	2
Interface	OWI,Ratiometric Analog Voltage,4-20mA	OWI,Ratiometric Analog Voltage,4-20mA
Operating Temperature Range, C	-40 to 150	-40 to 150
Package Group	VQFN	VQFN
Package Size: mm2:W x L, PKG	36VQFN: 36 mm2: 6 x 6(VQFN)	36VQFN: 36 mm2: 6 x 6(VQFN)
Rating	Catalog	Catalog
Resolution, Bits	16	16
Sample Rate (max), SPS	15.6k	15.6k
Vs(Max), V	30	30
Vs(Min), V	3.3	3.3

Plan ecológico

Notas de aplicación

• Descargar
  Understanding Open Loop Gain of the PGA900 DAC Gain Amplifier
  PDF, 338 Kb, Archivo publicado: abr 2, 2015
  The open-loop gain (AOL) of an operational amplifier is one of the most important specifications. Proper understanding of AOL at DC and over frequency is crucial for the understanding of closed-loop gain, bandwidth, and stability analysis.This application note provides an in-depth understanding of the PGA900 AOL magnitude and phase over frequency. The effects of
• Descargar
  Connecting PGA900 Instrumentation Amplifier to Resistive Bridge Sensor
  PDF, 1.1 Mb, Archivo publicado: mayo 8, 2015
  Understanding the input and output limitations of an instrumentation amplifier (IA) is important in interfacing a resistive bridge sensor to the PGA900. Adjusting the common mode voltage of the input signal appropriately allows us to maximize the gain. Maximizing the gain yields the largest output signal span for the 24-bit analog-to-digital converter (ADC). The largest signal span maximizes the c
• Descargar
  System Noise Analysis of a Resistive Bridge Pressure Sensor Connected to the PGA
  PDF, 195 Kb, Archivo publicado: jul 7, 2015
  In this application note we will do a system noise analysis of the PGA900 connected to a resistive bridgepressure sensor. First, we will measure the noise referred to the output for the PGA900. Then, using these measurement results we will calculate the noise-free resolution and effective resolution of the PGA900 forits analog-to-digital converter operating at 64- and 128-Вµs output data
• Descargar
  Understanding Open Loop Output Impedance of the PGA900 DAC Gain Amplifier (Rev. A)
  PDF, 253 Kb, Revisión: A, Archivo publicado: mayo 19, 2015
  The open-loop output impedance (ZO) of an operational amplifier is one of the most important specifications. Proper understanding of ZO over frequency is crucial for the understanding of loop gain, bandwidth, and stability analysis.This application note provides an in-depth understanding of the PGA900 ZO magnitude over frequency. The effects of temperature, power
• Descargar
  PGA900 as 4- to 20-mA Current Loop Transmitter
  PDF, 238 Kb, Archivo publicado: mayo 7, 2015
  This application note shows the PGA900 used as a 2-wire, 4- to 20-mA current loop transmitter, a common method of transmitting sensor information in industrial process-monitoring applications. Transmitting sensor information (physical parameter measurements) through a current loop is particularly useful when the information must be sent to a remote location over long distances (1000 feet or more).
• Descargar
  PGA900 DAC Output Stability Application Note
  PDF, 253 Kb, Archivo publicado: marzo 4, 2015
  Capacitive load drive is one of the most common causes of operational amplifier stability issues. The load capacitance, CL, interacts with the open-loop output impedance of the amplifier, ZO, by adding a single or double pole in the open-loop response. The additional pole or poles degrades the circuit phase margin, resulting in transient overshoot and ringing, ac gain peaking
• Descargar
  Two-step calibration of sensor signal conditioners
  PDF, 124 Kb, Archivo publicado: abr 28, 2015
• Descargar
  Design tips for a resistive-bridge pressure sensor in industrial process-control
  PDF, 240 Kb, Archivo publicado: jul 24, 2015
• Descargar
  Analog Applications Journal 2Q 2015
  PDF, 2.5 Mb, Archivo publicado: abr 28, 2015
• Descargar
  Analog Applications Journal 3Q 2015
  PDF, 7.1 Mb, Archivo publicado: jul 24, 2015

Linea modelo

Clasificación del fabricante

• Semiconductors> Sensing Products> Resistive Bridge Sensor Signal Conditioners