Datasheet Texas Instruments OPA843 — Ficha de datos

Fabricante	Texas Instruments
Serie	OPA843

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Parameters / Models	OPA843ID	OPA843IDBVR	OPA843IDBVT	OPA843IDBVTG4	OPA843IDG4	OPA843IDR	OPA843IDRG4
2nd Harmonic, dBc	76	76	76	76	76	76	76
3rd Harmonic, dBc	102	102	102	102	102	102	102
@ MHz	5	5	5	5	5	5	5
Acl, min spec gain, V/V	3	3	3	3	3	3	3
Additional Features	Decompensated	Decompensated	Decompensated	Decompensated	Decompensated	Decompensated	Decompensated
Architecture	Bipolar,Voltage FB	Bipolar,Voltage FB	Bipolar,Voltage FB	Bipolar,Voltage FB	Bipolar,Voltage FB	Bipolar,Voltage FB	Bipolar,Voltage FB
BW @ Acl, MHz	500	500	500	500	500	500	500
CMRR(Min), dB	85	85	85	85	85	85	85
CMRR(Typ), dB	95	95	95	95	95	95	95
GBW(Typ), MHz	1500	1500	1500	1500	1500	1500	1500
Input Bias Current(Max), pA	35000000	35000000	35000000	35000000	35000000	35000000	35000000
Iq per channel(Max), mA	20.8	20.8	20.8	20.8	20.8	20.8	20.8
Iq per channel(Typ), mA	20.2	20.2	20.2	20.2	20.2	20.2	20.2
Number of Channels	1	1	1	1	1	1	1
Offset Drift(Typ), uV/C	4	4	4	4	4	4	4
Operating Temperature Range, C	-40 to 85	-40 to 85	-40 to 85	-40 to 85	-40 to 85	-40 to 85	-40 to 85
Output Current(Typ), mA	100	100	100	100	100	100	100
Package Group	SOIC	SOT-23	SOT-23	SOT-23	SOIC	SOIC	SOIC
Package Size: mm2:W x L, PKG	8SOIC: 29 mm2: 6 x 4.9(SOIC)	5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23)	5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23)	5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23)	8SOIC: 29 mm2: 6 x 4.9(SOIC)	8SOIC: 29 mm2: 6 x 4.9(SOIC)	8SOIC: 29 mm2: 6 x 4.9(SOIC)
Rail-to-Rail	No	No	No	No	No	No	No
Rating	Catalog	Catalog	Catalog	Catalog	Catalog	Catalog	Catalog
Slew Rate(Typ), V/us	1000	1000	1000	1000	1000	1000	1000
Total Supply Voltage(Max), +5V=5, +/-5V=10	12	12	12	12	12	12	12
Total Supply Voltage(Min), +5V=5, +/-5V=10	8	8	8	8	8	8	8
Vn at 1kHz(Typ), nV/rtHz	2	2	2	2	2	2	2
Vn at Flatband(Typ), nV/rtHz	2	2	2	2	2	2	2
Vos (Offset Voltage @ 25C)(Max), mV	1.2	1.2	1.2	1.2	1.2	1.2	1.2

Plan ecológico

Notas de aplicación

• Descargar
  Using a decompensated op amp for improved performance
  PDF, 352 Kb, Archivo publicado: marzo 11, 2005
• Descargar
  RLC Filter Design for ADC Interface Applications (Rev. A)
  PDF, 299 Kb, Revisión: A, Archivo publicado: mayo 13, 2015
  As high performance Analog-to-Digital Converters (ADCs) continue to improve in their performance, the last stage interface from the final amplifier into the converter inputs becomes a critical element in the system design if the full converter dynamic range is desired. This application note describes the performance and design equations for a simple passive 2nd-order filter used successfully in AD
• Descargar
  ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers
  PDF, 273 Kb, Archivo publicado: abr 22, 2004
  Once an analog-to-digital converter (ADC) and a driver/interface have been selected for a given application, the next step to achieving excellent performance is laying out the printed circuit board (PCB) that will support the application. This application report describes several techniques for optimizing a high-speed, 14-bit performance, differential driver PCB layout using a wideband operation
• Descargar
  Measuring Board Parasitics in High-Speed Analog Design
  PDF, 134 Kb, Archivo publicado: jul 7, 2003
  Successful circuit designs using high-speed amplifiers can depend upon understanding and identifying parasitic PCB components. Simulating a design while including PCB parasitics can protect against unpleasant production surprises. This application report discusses an easy method for measuring parasitic components in a prototype or final PC board design by using a standard oscilloscope and low freq
• Descargar
  Noise Analysis for High Speed Op Amps (Rev. A)
  PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
  As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Linea modelo

Clasificación del fabricante

• Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> High-Speed Op Amps (>=50MHz)