Datasheet Texas Instruments MSP430G2755 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | MSP430G2755 |
MSP430G2x55 Microcontrolador de señal mixta
Hojas de datos
MSP430G2x55 Mixed Signal Microcontroller datasheet
PDF, 1.5 Mb, Archivo publicado: marzo 22, 2013
Extracto del documento
Precios
Estado
| MSP430G2755IDA38 | MSP430G2755IDA38R | MSP430G2755IRHA40R | MSP430G2755IRHA40T | |
|---|---|---|---|---|
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No | No | No | No |
Embalaje
| MSP430G2755IDA38 | MSP430G2755IDA38R | MSP430G2755IRHA40R | MSP430G2755IRHA40T | |
|---|---|---|---|---|
| N | 1 | 2 | 3 | 4 |
| Pin | 38 | 38 | 40 | 40 |
| Package Type | DA | DA | RHA | RHA |
| Industry STD Term | TSSOP | TSSOP | VQFN | VQFN |
| JEDEC Code | R-PDSO-G | R-PDSO-G | S-PQFP-N | S-PQFP-N |
| Package QTY | 40 | 2000 | 2500 | 250 |
| Carrier | TUBE | LARGE T&R | LARGE T&R | SMALL T&R |
| Device Marking | G2755 | G2755 | G2755 | G2755 |
| Width (mm) | 6.2 | 6.2 | 6 | 6 |
| Length (mm) | 12.5 | 12.5 | 6 | 6 |
| Thickness (mm) | 1.15 | 1.15 | .9 | .9 |
| Pitch (mm) | .65 | .65 | .5 | .5 |
| Max Height (mm) | 1.2 | 1.2 | 1 | 1 |
| Mechanical Data | Descargar | Descargar | Descargar | Descargar |
Paramétricos
| Parameters / Models | MSP430G2755IDA38 | MSP430G2755IDA38R | MSP430G2755IRHA40R | MSP430G2755IRHA40T |
|---|---|---|---|---|
| ADC | ADC10 - 12ch | ADC10 - 12ch | ADC10 - 12ch | ADC10 - 12ch |
| AES | N/A | N/A | N/A | N/A |
| Active Power, uA/MHz | 243.75 | 243.75 | 243.75 | 243.75 |
| Additional Features | Watchdog,Temp Sensor,Brown Out Reset,IrDA | Watchdog,Temp Sensor,Brown Out Reset,IrDA | Watchdog,Temp Sensor,Brown Out Reset,IrDA | Watchdog,Temp Sensor,Brown Out Reset,IrDA |
| BSL | UART | UART | UART | UART |
| CPU | MSP430 | MSP430 | MSP430 | MSP430 |
| Comparators | 8 | 8 | 8 | 8 |
| Featured | g2 | g2 | g2 | g2 |
| Frequency, MHz | 16 | 16 | 16 | 16 |
| GPIO Pins | 32 | 32 | 32 | 32 |
| I2C | 1 | 1 | 1 | 1 |
| Max VCC | 3.6 | 3.6 | 3.6 | 3.6 |
| Min VCC | 1.8 | 1.8 | 1.8 | 1.8 |
| Multiplier | N/A | N/A | N/A | N/A |
| Non-volatile Memory, KB | 32 | 32 | 32 | 32 |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 |
| Package Group | TSSOP | TSSOP | VQFN | VQFN |
| Package Size: mm2:W x L, PKG | 38TSSOP: 101 mm2: 8.1 x 12.5(TSSOP) | 38TSSOP: 101 mm2: 8.1 x 12.5(TSSOP) | 40VQFN: 36 mm2: 6 x 6(VQFN) | 40VQFN: 36 mm2: 6 x 6(VQFN) |
| RAM, KB | 4 | 4 | 4 | 4 |
| Rating | Catalog | Catalog | Catalog | Catalog |
| SPI | 2 | 2 | 2 | 2 |
| Special I/O | Capacitive Touch I/O | Capacitive Touch I/O | Capacitive Touch I/O | Capacitive Touch I/O |
| Standby Power, LPM3-uA | 1 | 1 | 1 | 1 |
| Timers - 16-bit | 3 | 3 | 3 | 3 |
| UART | 1 | 1 | 1 | 1 |
| Wakeup Time, us | 1.5 | 1.5 | 1.5 | 1.5 |
Plan ecológico
| MSP430G2755IDA38 | MSP430G2755IDA38R | MSP430G2755IRHA40R | MSP430G2755IRHA40T | |
|---|---|---|---|---|
| RoHS | Obediente | Obediente | Obediente | Obediente |
Notas de aplicación
- NFC/RFID Reader Ultra-Low-Power Card Presence Detect With MSP430 and TRF79xxAPDF, 2.8 Mb, Archivo publicado: marzo 18, 2013
NFC and RFID reader battery-powered applications must have a defined and limited energy consumption budget as well as low cost for a product to be realized. Techniques and strategies have emerged over the years for the card presence detection that attempt to address both concerns.The intent of this application report is to contribute to these techniques and strategies by offering an advancement - 1-uA Capacitive Grip Detection Based on MSP430 Microcontrollers (Rev. B)PDF, 373 Kb, Revisión: B, Archivo publicado: agosto 14, 2013
This application report discusses how to design a simple and ultra low-power grip detector BoosterPack for the MSP430 LaunchPadв„ў. The PINOSC feature in every msp430G2xx2 and msp430G2xx3 device makes it possible to eliminate all the external components when implementing a capacitive touch design. All the components used in the grip detector, such as capacitive sensors, LEDs are all integrate - Migrating From MSP430 F2xx and G2xx Families to MSP430 FR4xx and FR2xx Family (Rev. E)PDF, 237 Kb, Revisión: E, Archivo publicado: mayo 4, 2018
This application report helps to ease the migration from MSP430F2xx flash-based MCUs to the MSP430FR4xx and MSP430FR2xx family of FRAM-based MCUs. It discusses programming system hardware core architecture and peripheral considerations. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx and MSP430FR2xx devices see the MSP430
Linea modelo
Serie: MSP430G2755 (4)
Clasificación del fabricante
- Semiconductors> Microcontrollers (MCU)> MSP430 ultra-low-power MCUs> MSP430G2x/i2x