Datasheet Texas Instruments MSP430FR5889 — Ficha de datos

Fabricante	Texas Instruments
Serie	MSP430FR5889

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Parameters / Models	MSP430FR5889IPM	MSP430FR5889IPMR	MSP430FR5889IRGCR	MSP430FR5889IRGCT
ADC	ADC12 - 12ch	ADC12 - 12ch	ADC12 - 12ch	ADC12 - 12ch
AES	N/A	N/A	N/A	N/A
Active Power, uA/MHz	101.25	101.25	101.25	101.25
Additional Features	Real-Time Clock,Watchdog,Scan Interface,Temp Sensor,Brown Out Reset,IrDA	Real-Time Clock,Watchdog,Scan Interface,Temp Sensor,Brown Out Reset,IrDA	Real-Time Clock,Watchdog,Scan Interface,Temp Sensor,Brown Out Reset,IrDA	Real-Time Clock,Watchdog,Scan Interface,Temp Sensor,Brown Out Reset,IrDA
BSL	UART	UART	UART	UART
CPU	MSP430	MSP430	MSP430	MSP430
Comparators	12	12	12	12
DMA	3	3	3	3
Featured	fr5	fr5	fr5	fr5
Frequency, MHz	16	16	16	16
GPIO Pins	48	48	48	48
I2C	2	2	2	2
Max VCC	3.6	3.6	3.6	3.6
Min VCC	1.8	1.8	1.8	1.8
Multiplier	32x32	32x32	32x32	32x32
Non-volatile Memory, KB	128	128	128	128
Operating Temperature Range, C	-40 to 85	-40 to 85	-40 to 85	-40 to 85
Package Group	LQFP	LQFP	VQFN	VQFN
Package Size: mm2:W x L, PKG	64LQFP: 144 mm2: 12 x 12(LQFP)	64LQFP: 144 mm2: 12 x 12(LQFP)	64VQFN: 81 mm2: 9 x 9(VQFN)	64VQFN: 81 mm2: 9 x 9(VQFN)
RAM, KB	2	2	2	2
Rating	Catalog	Catalog	Catalog	Catalog
SPI	4	4	4	4
Security Enabler	Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection	Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection	Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection	Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection
Special I/O	N/A	N/A	N/A	N/A
Standby Power, LPM3-uA	0.9	0.9	0.9	0.9
Timers - 16-bit	5	5	5	5
UART	2	2	2	2
Wakeup Time, us	7	7	7	7

Plan ecológico

Notas de aplicación

• Descargar
  Method to Select the Value of LC Sensor for MSP430 Extended Scan Interface (ESI)
  PDF, 374 Kb, Archivo publicado: agosto 28, 2014
  This document describes a method that can be used to select an LC sensor for use with the MSP430в„ў Extended Scan Interface (ESI).
• Descargar
  LC Sensor Rotation Detection With MSP430 Extended Scan Interface (ESI)
  PDF, 2.2 Mb, Archivo publicado: agosto 28, 2014
  This application report describes the implementation of a flow meter using the Texas Instruments MSP430FR6989 microcontroller with the Extended Scan Interface (ESI) module. This module can provide a contactless sensing approach to detecting a rotating disc. The number of rotations of the disc indicates the volume flow of gas or water and can be used to calculate the fee for the user. This applicat
• Descargar
  Adjustment of ESIOSC Oscillator Frequency (Rev. A)
  PDF, 192 Kb, Revisión: A, Archivo publicado: enero 30, 2015
  The MSP430FR698x Extended Scan Interface (ESI) uses two clock sources. These clocks are ACLK and a high-frequency clock generated by the ESI oscillator, ESIOSC. ESIOSC is realized as an RC-oscillator and shows a temperature and voltage dependency. However, a hardware-supported measurement of ESIOSC frequency and adjustment by software allows compensating for the frequency drift. This application r
• Descargar
  Migrating From MSP430FW42x Scan Interface to MSP430FR6x8x/FR5x8x ESI (Rev. A)
  PDF, 95 Kb, Revisión: A, Archivo publicado: feb 6, 2015
  The purpose of this application report is to facilitate the migration of designs based on the MSP430FW42x Scan Interface (SIF) to the MSP430FR5xx/FR6xx Extended Scan Interface (ESI). This document describes the main differences between the two peripheral modules and provides migration solutions covering both software and hardware aspects.
• Descargar
  Getting Started With EEMBC ULPBench on MSP-EXP430FR5969 (Rev. A)
  PDF, 381 Kb, Revisión: A, Archivo publicado: enero 29, 2015
  This is a getting started guide for obtaining the ULPMarkв„ў-CP score using the Embedded Microprocessor Benchmark Consortium (EEMBC) ULPBench and EnergyMonitor with the MSP430FR5969 microcontroller (MCU). This document uses the MSP-EXP430FR5969 LaunchPad development kit as the target evaluation module (EVM) for performing the benchmark.
• Descargar
  Migrating From MSP430F4xx Family to MSP430FR58xx/FR59xx/FR68xx/FR69xx Family (Rev. B)
  PDF, 183 Kb, Revisión: B, Archivo publicado: nov 3, 2016
  This application report enables easy migration from MSP430F4xx flash-based MCUs to the MSP430FR58xx/59xx/68xx/69xx family of FRAM-based MCUs. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR58xx/FR59xx/68xx/69xx devices, see the MSP430FR58xx, MSP430FR59xx, MSP430FR68xx, and MSP430FR69xx Family User's Guide.
• Descargar
  MSP430 Advanced Power Optimizations: ULP Advisor SW and EnergyTrace Technology
  PDF, 4.0 Mb, Archivo publicado: jun 9, 2014
  MSP430 microcontrollers are designed specifically for ultra-low-power applications. Features such as multiple low-power modes, instant wakeup, intelligent autonomous peripherals, and much more to enable such ultra-low-power capabilities. Texas Instruments provides valuable tools to help the programmer fully use these benefits and optimize power consumption of the target application. This app
• Descargar
  Designing With the MSP430FR58xx, FR59xx, FR68xx, and FR69xx ADC (Rev. A)
  PDF, 137 Kb, Revisión: A, Archivo publicado: marzo 30, 2016
  Designing an application with the analog-to-digital converter (ADC) requires several considerations to optimize for power and performance. This application report discusses the basics of how you would analyze a data sheet and user's guide to design your application. It goes into the fundamentals of how to optimize your design based on the external requirements and available ADC configurations. The
• Descargar
  MSP430 FRAM Technology – How To and Best Practices
  PDF, 326 Kb, Archivo publicado: jun 23, 2014
  FRAM is a non-volatile memory technology that behaves similar to SRAM while enabling a whole host of new applications, but also changing the way firmware should be designed. This application report outlines the how to and best practices of using FRAM technology in MSP430 from an embedded software development perspective. It discusses how to implement a memory layout according to application-specif
• Descargar
  MSP430 FRAM Quality and Reliability (Rev. A)
  PDF, 295 Kb, Revisión: A, Archivo publicado: mayo 1, 2014
  FRAM is a nonvolatile embedded memory technology and is known for its ability to be ultra-low power while being the most flexible and easy-to-use universal memory solution available today. This application report is intended to give new FRAM users and those migrating from flash-based applications knowledge on how FRAM meets key quality and reliability requirements such as data retention and endura
• Descargar
  Migrating from the MSP430F5xx,F6xx Family to the MSP430FR58xx/FR59xx/68xx Family (Rev. D)
  PDF, 151 Kb, Revisión: D, Archivo publicado: nov 3, 2016
  This application report helps enable easy migration from MSP430F5xx and MSP430F6xx flash-based MCUs to the MSP430FR58xx/FR59xx/68xx/69xx FRAM-based MCUs. For the migration guide to MSP430FR57xx, see Migrating From the MSP430F2xx Family to the MSP430FR57xx Family. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight differences between the
• Descargar
  Migrating from the MSP430F2xx,G2xx Family to the MSP430FR58xx/FR59xx/68xx/69xx (Rev. E)
  PDF, 179 Kb, Revisión: E, Archivo publicado: nov 3, 2016
  This application report enables easy migration from MSP430F2xx flash-based MCUs to the MSP430FR58xx/FR59xx/68xx/69xx family of FRAM-based MCUs. For the migration guide to MSP430FR57xx, see Migrating From the MSP430F2xx Family to the MSP430FR57xx Family. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight key differences between the two f
• Descargar
  General Oversampling of MSP ADCs for Higher Resolution (Rev. A)
  PDF, 551 Kb, Revisión: A, Archivo publicado: abr 1, 2016
  Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl

Linea modelo

Clasificación del fabricante

• Semiconductors> Microcontrollers (MCU)> MSP430 ultra-low-power MCUs> MSP430FRxx FRAM