Datasheet Texas Instruments MSP430FR58471 — Ficha de datos

Fabricante	Texas Instruments
Serie	MSP430FR58471

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Parameters / Models	MSP430FR58471IRHAR	MSP430FR58471IRHAT
ADC	ADC12 - 14ch	ADC12 - 14ch
AES	N/A	N/A
Active Power, uA/MHz	101.25	101.25
Additional Features	Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDA	Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDA
BSL	I2C	I2C
CPU	MSP430	MSP430
Comparators	16	16
DMA	3	3
Featured	fr5	fr5
Frequency, MHz	16	16
GPIO Pins	33	33
I2C	1	1
Max VCC	3.6	3.6
Min VCC	1.8	1.8
Multiplier	32x32	32x32
Non-volatile Memory, KB	32	32
Operating Temperature Range, C	-40 to 85	-40 to 85
Package Group	VQFN	VQFN
Package Size: mm2:W x L, PKG	40VQFN: 36 mm2: 6 x 6(VQFN)	40VQFN: 36 mm2: 6 x 6(VQFN)
RAM, KB	1	1
Rating	Catalog	Catalog
SPI	3	3
Security Enabler	Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection	Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection
Special I/O	N/A	N/A
Standby Power, LPM3-uA	0.5	0.5
Timers - 16-bit	5	5
UART	2	2
Wakeup Time, us	7	7

Plan ecológico

Notas de aplicación

• Descargar
  Migrating From MSP430F4xx Family to MSP430FR58xx/FR59xx/FR68xx/FR69xx Family (Rev. B)
  PDF, 183 Kb, Revisión: B, Archivo publicado: nov 3, 2016
  This application report enables easy migration from MSP430F4xx flash-based MCUs to the MSP430FR58xx/59xx/68xx/69xx family of FRAM-based MCUs. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR58xx/FR59xx/68xx/69xx devices, see the MSP430FR58xx, MSP430FR59xx, MSP430FR68xx, and MSP430FR69xx Family User's Guide.
• Descargar
  Getting Started With EEMBC ULPBench on MSP-EXP430FR5969 (Rev. A)
  PDF, 381 Kb, Revisión: A, Archivo publicado: enero 29, 2015
  This is a getting started guide for obtaining the ULPMarkв„ў-CP score using the Embedded Microprocessor Benchmark Consortium (EEMBC) ULPBench and EnergyMonitor with the MSP430FR5969 microcontroller (MCU). This document uses the MSP-EXP430FR5969 LaunchPad development kit as the target evaluation module (EVM) for performing the benchmark.
• Descargar
  MSP430 Advanced Power Optimizations: ULP Advisor SW and EnergyTrace Technology
  PDF, 4.0 Mb, Archivo publicado: jun 9, 2014
  MSP430 microcontrollers are designed specifically for ultra-low-power applications. Features such as multiple low-power modes, instant wakeup, intelligent autonomous peripherals, and much more to enable such ultra-low-power capabilities. Texas Instruments provides valuable tools to help the programmer fully use these benefits and optimize power consumption of the target application. This app
• Descargar
  Designing With the MSP430FR58xx, FR59xx, FR68xx, and FR69xx ADC (Rev. A)
  PDF, 137 Kb, Revisión: A, Archivo publicado: marzo 30, 2016
  Designing an application with the analog-to-digital converter (ADC) requires several considerations to optimize for power and performance. This application report discusses the basics of how you would analyze a data sheet and user's guide to design your application. It goes into the fundamentals of how to optimize your design based on the external requirements and available ADC configurations. The
• Descargar
  MSP430 FRAM Technology – How To and Best Practices
  PDF, 326 Kb, Archivo publicado: jun 23, 2014
  FRAM is a non-volatile memory technology that behaves similar to SRAM while enabling a whole host of new applications, but also changing the way firmware should be designed. This application report outlines the how to and best practices of using FRAM technology in MSP430 from an embedded software development perspective. It discusses how to implement a memory layout according to application-specif
• Descargar
  MSP430 FRAM Quality and Reliability (Rev. A)
  PDF, 295 Kb, Revisión: A, Archivo publicado: mayo 1, 2014
  FRAM is a nonvolatile embedded memory technology and is known for its ability to be ultra-low power while being the most flexible and easy-to-use universal memory solution available today. This application report is intended to give new FRAM users and those migrating from flash-based applications knowledge on how FRAM meets key quality and reliability requirements such as data retention and endura
• Descargar
  Migrating from the MSP430F5xx,F6xx Family to the MSP430FR58xx/FR59xx/68xx Family (Rev. D)
  PDF, 151 Kb, Revisión: D, Archivo publicado: nov 3, 2016
  This application report helps enable easy migration from MSP430F5xx and MSP430F6xx flash-based MCUs to the MSP430FR58xx/FR59xx/68xx/69xx FRAM-based MCUs. For the migration guide to MSP430FR57xx, see Migrating From the MSP430F2xx Family to the MSP430FR57xx Family. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight differences between the
• Descargar
  Migrating from the MSP430F2xx,G2xx Family to the MSP430FR58xx/FR59xx/68xx/69xx (Rev. E)
  PDF, 179 Kb, Revisión: E, Archivo publicado: nov 3, 2016
  This application report enables easy migration from MSP430F2xx flash-based MCUs to the MSP430FR58xx/FR59xx/68xx/69xx family of FRAM-based MCUs. For the migration guide to MSP430FR57xx, see Migrating From the MSP430F2xx Family to the MSP430FR57xx Family. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight key differences between the two f
• Descargar
  General Oversampling of MSP ADCs for Higher Resolution (Rev. A)
  PDF, 551 Kb, Revisión: A, Archivo publicado: abr 1, 2016
  Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl

Linea modelo

Clasificación del fabricante

• Semiconductors> Microcontrollers (MCU)> MSP430 ultra-low-power MCUs> MSP430FRxx FRAM