Datasheet Texas Instruments MSP430FR4132 — Ficha de datos

Fabricante	Texas Instruments
Serie	MSP430FR4132

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Parameters / Models	MSP430FR4132IG48	MSP430FR4132IG48R	MSP430FR4132IG56	MSP430FR4132IG56R	MSP430FR4132IPMR
ADC	ADC10 - 10ch	ADC10 - 10ch	ADC10 - 10ch	ADC10 - 10ch	ADC10 - 10ch
AES	N/A	N/A	N/A	N/A	N/A
Active Power, uA/MHz	126	126	126	126	126
Additional Features	LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset	LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset	LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset	LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset	LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset
BSL	UART	UART	UART	UART	UART
CPU	MSP430	MSP430	MSP430	MSP430	MSP430
Featured	fr4	fr4	fr4	fr4	fr4
Frequency, MHz	16	16	16	16	16
GPIO Pins	60	60	60	60	60
I2C	1	1	1	1	1
Max VCC	3.6	3.6	3.6	3.6	3.6
Min VCC	1.8	1.8	1.8	1.8	1.8
Multiplier	N/A	N/A	N/A	N/A	N/A
Non-volatile Memory, KB	8	8	8	8	8
Operating Temperature Range, C	-40 to 85	-40 to 85	-40 to 85	-40 to 85	-40 to 85
Package Group	TSSOP	TSSOP	TSSOP	TSSOP	LQFP
Package Size: mm2:W x L, PKG	48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP)	48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP)	48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP)	48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP)	64LQFP: 144 mm2: 12 x 12(LQFP)
RAM, KB	1	1	1	1	1
Rating	Catalog	Catalog	Catalog	Catalog	Catalog
SPI	2	2	2	2	2
Security Enabler	Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection	Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection	Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection	Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection	Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection
Special I/O	N/A	N/A	N/A	N/A	N/A
Standby Power, LPM3-uA	1.31	1.31	1.31	1.31	1.31
Timers - 16-bit	2	2	2	2	2
UART	1	1	1	1	1
Wakeup Time, us	10	10	10	10	10

Plan ecológico

Notas de aplicación

• Descargar
  Migrating from the MSP430F4xx to Family to the MSP430FR4xx Family
  PDF, 194 Kb, Archivo publicado: oct 3, 2014
  This application report enables easy migration from MSP430F4xx flash-based MCUs to the MSP430FR4xx/FR2xx family of FRAM-based MCUs. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx/FR2xx devices, see the MSP430FR4xx and MSP430FR2xx Family User
• Descargar
  Infrared Remote Control Implementation With MSP430FR4xx (Rev. B)
  PDF, 329 Kb, Revisión: B, Archivo publicado: jun 30, 2015
  This application report provides an insight into several of the most frequently used infrared protocols and especially their flexible implementation using the TI MSP430FR4xx series of low-power microcontrollers.The MSP430FR4xx microcontrollers are primarily targeted at remote control application that are equipped with infrared modulation function and an LCD display. The infrared modulation combi
• Descargar
  VLO Calibration on the MSP430FR4xx and MSP430FR2xx Family (Rev. A)
  PDF, 78 Kb, Revisión: A, Archivo publicado: feb 19, 2016
  MSP430FR4xx and MSP430FR2xx (FR4xx/FR2xx) family microcontrollers (MCUs) provide various clock sources, including some high-speed high-accuracy clocks and some low-power low-system-cost clocks. Users can select the best balance of performance, power consumption, and system cost. The on-chip very low-frequency oscillator (VLO) is a clock source with 10-kHz typical frequency included in FR4xx/FR2xx
• Descargar
  MSP430 FRAM Technology – How To and Best Practices
  PDF, 326 Kb, Archivo publicado: jun 23, 2014
  FRAM is a non-volatile memory technology that behaves similar to SRAM while enabling a whole host of new applications, but also changing the way firmware should be designed. This application report outlines the how to and best practices of using FRAM technology in MSP430 from an embedded software development perspective. It discusses how to implement a memory layout according to application-specif
• Descargar
  MSP430 FRAM Quality and Reliability (Rev. A)
  PDF, 295 Kb, Revisión: A, Archivo publicado: mayo 1, 2014
  FRAM is a nonvolatile embedded memory technology and is known for its ability to be ultra-low power while being the most flexible and easy-to-use universal memory solution available today. This application report is intended to give new FRAM users and those migrating from flash-based applications knowledge on how FRAM meets key quality and reliability requirements such as data retention and endura
• Descargar
  MSP430 Embedded Application Binary Interface
  PDF, 596 Kb, Archivo publicado: mayo 16, 2012
  This document is a specification for the ELF-based Embedded Application Binary Interface (EABI) for the MSP430 family of processors from Texas Instruments. The EABI defines the low-level interface between programs, program components, and the execution environment, including the operating system if one is present. Components of the EABI include calling conventions, data layout and addressing conve
• Descargar
  Migrating From MSP430 F2xx and G2xx Families to MSP430 FR4xx and FR2xx Family (Rev. E)
  PDF, 237 Kb, Revisión: E, Archivo publicado: mayo 4, 2018
  This application report helps to ease the migration from MSP430F2xx flash-based MCUs to the MSP430FR4xx and MSP430FR2xx family of FRAM-based MCUs. It discusses programming system hardware core architecture and peripheral considerations. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx and MSP430FR2xx devices see the MSP430
• Descargar
  Designing With MSP430 and Segment LCDs (Rev. A)
  PDF, 2.1 Mb, Revisión: A, Archivo publicado: jul 20, 2015
  Segment liquid crystal displays (LCDs) are needed to provide information to users in a wide variety of applications from smart meters to electronic shelf labels (ESL) to medical equipment. Several MSP430в„ў microcontroller families include built-in low-power LCD driver circuitry that allows the MSP430 MCU to directly control the segmented LCD glass. This application note helps explain how segmented
• Descargar
  General Oversampling of MSP ADCs for Higher Resolution (Rev. A)
  PDF, 551 Kb, Revisión: A, Archivo publicado: abr 1, 2016
  Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl

Linea modelo

Clasificación del fabricante

• Semiconductors> Microcontrollers (MCU)> MSP430 ultra-low-power MCUs> MSP430FRxx FRAM