Datasheet Texas Instruments MSP430F2618-EP — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | MSP430F2618-EP |
Producto mejorado MCU de 16 bits de potencia ultrabaja, Flash de 92 KB, RAM de 8 KB, ADC de 12 bits, DAC dual, 2 USCI
Hojas de datos
Mixed Signal Microcontroller datasheet
PDF, 1.2 Mb, Archivo publicado: dic 15, 2008
Extracto del documento
Precios
Estado
| MSP430F2618TGQWTEP | V62/09620-01XA | |
|---|---|---|
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí | Sí |
Embalaje
| MSP430F2618TGQWTEP | V62/09620-01XA | |
|---|---|---|
| N | 1 | 2 |
| Pin | 113 | 113 |
| Package Type | GQW | GQW |
| Industry STD Term | BGA MICROSTAR JUNIOR | BGA MICROSTAR JUNIOR |
| JEDEC Code | S-PBGA-N | S-PBGA-N |
| Package QTY | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | F2618GQWEP | F2618GQWEP |
| Width (mm) | 7 | 7 |
| Length (mm) | 7 | 7 |
| Thickness (mm) | .74 | .74 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | 1 | 1 |
| Mechanical Data | Descargar | Descargar |
Paramétricos
| Parameters / Models | MSP430F2618TGQWTEP | V62/09620-01XA |
|---|---|---|
| ADC | ADC12 - 8ch | ADC12 - 8ch |
| AES | N/A | N/A |
| Active Power, uA/MHz | 365 | 365 |
| Additional Features | Watchdog,DAC,Temp Sensor,Brown Out Reset | Watchdog,DAC,Temp Sensor,Brown Out Reset |
| BSL | UART | UART |
| CPU | MSP430 | MSP430 |
| Comparators | Yes | Yes |
| DMA | 3 | 3 |
| Frequency, MHz | 16 | 16 |
| GPIO | 48 | 48 |
| I2C | 2 | 2 |
| Max VCC | 3.6 | 3.6 |
| Min VCC | 1.8 | 1.8 |
| Multiplier | 16x16 | 16x16 |
| Non-volatile Memory, KB | 116 | 116 |
| Operating Temperature Range, C | -40 to 105 | -40 to 105 |
| Package Group | BGA MICROSTAR JUNIOR | BGA MICROSTAR JUNIOR |
| Package Size: mm2:W x L, PKG | 113BGA MICROSTAR JUNIOR: 49 mm2: 7 x 7(BGA MICROSTAR JUNIOR) | 113BGA MICROSTAR JUNIOR: 49 mm2: 7 x 7(BGA MICROSTAR JUNIOR) |
| RAM, KB | 8 | 8 |
| Rating | HiRel Enhanced Product | HiRel Enhanced Product |
| SPI | 2 | 2 |
| Special I/O | N/A | N/A |
| Standby Power, LPM3-uA | 0.5 | 0.5 |
| Timers - 16-bit | 2 | 2 |
| UART | 2 | 2 |
| Wakeup Time, us | 1 | 1 |
Plan ecológico
| MSP430F2618TGQWTEP | V62/09620-01XA | |
|---|---|---|
| RoHS | See ti.com | See ti.com |
Notas de aplicación
- Migrating From MSP430 F2xx and G2xx Families to MSP430 FR4xx and FR2xx Family (Rev. E)PDF, 237 Kb, Revisión: E, Archivo publicado: mayo 4, 2018
This application report helps to ease the migration from MSP430F2xx flash-based MCUs to the MSP430FR4xx and MSP430FR2xx family of FRAM-based MCUs. It discusses programming system hardware core architecture and peripheral considerations. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx and MSP430FR2xx devices see the MSP430 - General Oversampling of MSP ADCs for Higher Resolution (Rev. A)PDF, 551 Kb, Revisión: A, Archivo publicado: abr 1, 2016
Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl
Linea modelo
Serie: MSP430F2618-EP (2)
Clasificación del fabricante
- Semiconductors> Space & High Reliability> Microcontroller> Low Power MCU> MSP430 MCU