Datasheet Texas Instruments LMP7716-Q1 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | LMP7716-Q1 |
Precisión dual, 17 MHz, bajo nivel de ruido, amplificador de entrada CMOS
Hojas de datos
LMP7715/LMP7716/LMP7716Q Single/Dual Prec, 17MHz, Low Noise, CMOS Input Amps datasheet
PDF, 1.1 Mb, Revisión: E, Archivo publicado: marzo 25, 2013
Extracto del documento
Precios
Estado
| LMP7716QMM/NOPB | LMP7716QMME/NOPB | LMP7716QMMX/NOPB | |
|---|---|---|---|
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No | No | Sí |
Embalaje
| LMP7716QMM/NOPB | LMP7716QMME/NOPB | LMP7716QMMX/NOPB | |
|---|---|---|---|
| N | 1 | 2 | 3 |
| Pin | 8 | 8 | 8 |
| Package Type | DGK | DGK | DGK |
| Industry STD Term | VSSOP | VSSOP | VSSOP |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 1000 | 250 | 3500 |
| Carrier | SMALL T&R | SMALL T&R | LARGE T&R |
| Device Marking | AR5A | AR5A | AR5A |
| Width (mm) | 3 | 3 | 3 |
| Length (mm) | 3 | 3 | 3 |
| Thickness (mm) | .97 | .97 | .97 |
| Pitch (mm) | .65 | .65 | .65 |
| Max Height (mm) | 1.07 | 1.07 | 1.07 |
| Mechanical Data | Descargar | Descargar | Descargar |
Paramétricos
| Parameters / Models | LMP7716QMM/NOPB | LMP7716QMME/NOPB | LMP7716QMMX/NOPB |
|---|---|---|---|
| Additional Features | N/A | N/A | N/A |
| Architecture | CMOS | CMOS | CMOS |
| CMRR(Min), dB | 85 | 85 | 85 |
| CMRR(Typ), dB | 100 | 100 | 100 |
| GBW(Typ), MHz | 17 | 17 | 17 |
| Input Bias Current(Max), pA | 1 | 1 | 1 |
| Iq per channel(Max), mA | 1.7 | 1.7 | 1.7 |
| Iq per channel(Typ), mA | 1.3 | 1.3 | 1.3 |
| Number of Channels | 2 | 2 | 2 |
| Offset Drift(Typ), uV/C | 1.75 | 1.75 | 1.75 |
| Operating Temperature Range, C | -40 to 125 | -40 to 125 | -40 to 125 |
| Output Current(Typ), mA | 21 | 21 | 21 |
| Package Group | VSSOP | VSSOP | VSSOP |
| Package Size: mm2:W x L, PKG | 8VSSOP: 15 mm2: 4.9 x 3(VSSOP) | 8VSSOP: 15 mm2: 4.9 x 3(VSSOP) | 8VSSOP: 15 mm2: 4.9 x 3(VSSOP) |
| Rail-to-Rail | In to V-,Out | In to V-,Out | In to V-,Out |
| Rating | Automotive | Automotive | Automotive |
| Slew Rate(Typ), V/us | 9.5 | 9.5 | 9.5 |
| Total Supply Voltage(Max), +5V=5, +/-5V=10 | 5.5 | 5.5 | 5.5 |
| Total Supply Voltage(Min), +5V=5, +/-5V=10 | 1.8 | 1.8 | 1.8 |
| Vn at 1kHz(Typ), nV/rtHz | 5.8 | 5.8 | 5.8 |
| Vos (Offset Voltage @ 25C)(Max), mV | 0.15 | 0.15 | 0.15 |
Plan ecológico
| LMP7716QMM/NOPB | LMP7716QMME/NOPB | LMP7716QMMX/NOPB | |
|---|---|---|---|
| RoHS | Obediente | Obediente | Obediente |
Notas de aplicación
- AN-1952 Designing with Thermocouples (Rev. A)PDF, 72 Kb, Revisión: A, Archivo publicado: mayo 7, 2013
In 1821 Thomas Seebeck discovered the physical phenomenon that when you join two dissimilar metalson both ends and heat one end, a continuous current is created in the thermoelectric circuit . If the otherend is broken, a voltage can be measured that is proportional to the temperature difference between theheated junction (measuring or hot junction) and the open end (reference or cold ju
Linea modelo
Serie: LMP7716-Q1 (3)
Clasificación del fabricante
- Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> Precision Op Amps