Datasheet Texas Instruments LMH6554 — Ficha de datos
Fabricante | Texas Instruments |
Serie | LMH6554 |
Amplificador Ultra Lineal Totalmente Diferencial de 2.8 GHz
Hojas de datos
LMH6554 2.8-GHz Ultra Linear Fully Differential Amplifier datasheet
PDF, 1.7 Mb, Revisión: P, Archivo publicado: enero 14, 2015
Extracto del documento
Precios
Estado
LMH6554LE/NOPB | LMH6554LEE/NOPB | LMH6554LEX/NOPB | |
---|---|---|---|
Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
Disponibilidad de muestra del fabricante | No | Sí | No |
Embalaje
LMH6554LE/NOPB | LMH6554LEE/NOPB | LMH6554LEX/NOPB | |
---|---|---|---|
N | 1 | 2 | 3 |
Pin | 14 | 14 | 14 |
Package Type | NHJ | NHJ | NHJ |
Industry STD Term | UQFN | UQFN | UQFN |
JEDEC Code | S-PQFP-N | S-PQFP-N | S-PQFP-N |
Package QTY | 1000 | 250 | 4500 |
Carrier | LARGE T&R | SMALL T&R | LARGE T&R |
Device Marking | AJA | AJA | AJA |
Width (mm) | 2.5 | 2.5 | 2.5 |
Length (mm) | 2.5 | 2.5 | 2.5 |
Thickness (mm) | .6 | .6 | .6 |
Pitch (mm) | .4 | .4 | .4 |
Max Height (mm) | .6 | .6 | .6 |
Mechanical Data | Descargar | Descargar | Descargar |
Paramétricos
Parameters / Models | LMH6554LE/NOPB | LMH6554LEE/NOPB | LMH6554LEX/NOPB |
---|---|---|---|
2nd Harmonic, dBc | 68 | 68 | 68 |
3rd Harmonic, dBc | 70 | 70 | 70 |
@ MHz | 250 | 250 | 250 |
Acl, min spec gain, V/V | 1 | 1 | 1 |
Additional Features | Shutdown | Shutdown | Shutdown |
Architecture | Bipolar,Current FB,Fully Differential | Bipolar,Current FB,Fully Differential | Bipolar,Current FB,Fully Differential |
BW @ Acl, MHz | 2800 | 2800 | 2800 |
CMRR(Min), dB | 73 | 73 | 73 |
CMRR(Typ), dB | 83 | 83 | 83 |
GBW(Typ), MHz | 2500 | 2500 | 2500 |
Input Bias Current(Max), pA | 8000000 | 8000000 | 8000000 |
Iq per channel(Max), mA | 52 | 52 | 52 |
Iq per channel(Typ), mA | 52 | 52 | 52 |
Number of Channels | 1 | 1 | 1 |
Operating Temperature Range, C | -40 to 125 | -40 to 125 | -40 to 125 |
Output Current(Typ), mA | 150 | 150 | 150 |
Package Group | UQFN | UQFN | UQFN |
Package Size: mm2:W x L, PKG | 14UQFN: 6 mm2: 2.5 x 2.5(UQFN) | 14UQFN: 6 mm2: 2.5 x 2.5(UQFN) | 14UQFN: 6 mm2: 2.5 x 2.5(UQFN) |
Rail-to-Rail | No | No | No |
Rating | Catalog | Catalog | Catalog |
Slew Rate(Typ), V/us | 6200 | 6200 | 6200 |
Total Supply Voltage(Max), +5V=5, +/-5V=10 | 5.25 | 5.25 | 5.25 |
Total Supply Voltage(Min), +5V=5, +/-5V=10 | 4.7 | 4.7 | 4.7 |
Vn at 1kHz(Typ), nV/rtHz | 0.9 | 0.9 | 0.9 |
Vn at Flatband(Typ), nV/rtHz | 0.9 | 0.9 | 0.9 |
Vos (Offset Voltage @ 25C)(Max), mV | 3 | 3 | 3 |
Plan ecológico
LMH6554LE/NOPB | LMH6554LEE/NOPB | LMH6554LEX/NOPB | |
---|---|---|---|
RoHS | Obediente | Obediente | Obediente |
Notas de aplicación
- A Walk Along the Signal Path (High-Speed Signal Path)PDF, 461 Kb, Archivo publicado: marzo 30, 2005
- Using High Speed Diff Amp to Drive ADCs (Rev. A)PDF, 175 Kb, Revisión: A, Archivo publicado: abr 26, 2013
The right high speed differential amplifier will add flexibility to signal chains that include a high speedanalog-to-digital converter (ADC). A differential amplifier can provide signal conditioning such as singleended to differential conversion, impedance transformation, and gain or attenuation. - AN-2177 Using the LMH6554 as a ADC Driver (Rev. A)PDF, 1.7 Mb, Revisión: A, Archivo publicado: abr 26, 2013
This application report discusses the use of the Texas Instruments LMH6554 as an ADC driver. - AN-1719 Noise Figure Analysis Fully Differential Amplifier (Rev. A)PDF, 97 Kb, Revisión: A, Archivo publicado: mayo 1, 2013
This application note provides noise figure analysis for fully differential amplifiers, including output noisecalculation and noise figure calculation. - Converting single-ended video to differential video in single-supply systemsPDF, 212 Kb, Archivo publicado: sept 16, 2011
Linea modelo
Serie: LMH6554 (3)
Clasificación del fabricante
- Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> High-Speed Op Amps (>=50MHz)