Datasheet Texas Instruments LM395T — Ficha de datos

Fabricante	Texas Instruments
Serie	LM395
Numero de parte	LM395T

Transistor de potencia ultra confiable 3-TO-220 0 a 125

Hojas de datos

Descargar

PDF, 1.8 Mb, Revisión: C, Archivo publicado: abr 7, 2013

Extracto del documento

Precios

Estado

Estado del ciclo de vida	NRND (No recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante	No

Embalaje

Pin	3
Package Type	NDE
Industry STD Term	TO-220
JEDEC Code	R-MSFM-P
Package QTY	45
Carrier	TUBE
Device Marking	LM395T
Width (mm)	10.16
Length (mm)	14.986
Thickness (mm)	4.572
Pitch (mm)	2.54
Max Height (mm)	4.7
Mechanical Data	Descargar

Reemplazos

Replacement	LM395T/NOPB
Replacement Code	S

Paramétricos

Package Group	TO-220
Package Size: mm2:W x L	See datasheet (TO-220) PKG

Plan ecológico

RoHS	See ti.com

Notas de aplicación

Descargar
AN-293 Control Applications of CMOS DACs
PDF, 424 Kb, Archivo publicado: mayo 10, 2004
Application Note 293 Control Applications of CMOS DACs
Descargar
General Purpose Power Supply
PDF, 94 Kb, Archivo publicado: oct 3, 2002
Descargar
AN-161 IC Voltage Reference has 1В ppm per Degree Drift (Rev. C)
PDF, 275 Kb, Revisión: C, Archivo publicado: mayo 6, 2013
A new linear IC now provides the ultimate in highly stable voltage references. Now, a new monolithic IC the LM199, out-performs zeners and can provide a 6.9 V reference with a temperature drift of less than 1 ppm/CВ° and excellent long term stability. This new IC, uses a unique subsurface zener to achieve low noise and a highly stable breakdown. Included is an on-chip temperature stabilizer that ho
Descargar
AN-173 IC Zener Eases Reference Design (Rev. B)
PDF, 137 Kb, Revisión: B, Archivo publicado: mayo 5, 2013
A new IC zener with low dynamic impedance and wide operating current range significantly simplifies reference or regulator circuit design. The low dynamic impedance provides better regulation against operating current changes, easing the requirements of the biasing supply. Further, the temperature coefficient is independent of operating current, so that the LM129 can be used at
Descargar
AN-460 LM34/LM35 Precision Monolithic Temperature Sensors (Rev. C)
PDF, 495 Kb, Revisión: C, Archivo publicado: mayo 1, 2013
This application report discusses the details and uses of the Texas Instruments LM34 and LM35 asprecision temperature sensors.
Descargar
AN-262 Applying Dual and Quad FET Op Amps (Rev. B)
PDF, 1.1 Mb, Revisión: B, Archivo publicado: mayo 6, 2013
The availability of dual and quad packaged FET op amps offers the designer all the traditional capabilitiesof FET op amps including low bias current and speed and some additional advantages. The cost-peramplifieris lower because of reduced package costs. This means that more amplifiers are available toimplement a function at a given cost making design easier. At the same time the availab
Descargar
AN-181 3-Terminal Regulator is Adjustable (Rev. B)
PDF, 314 Kb, Revisión: B, Archivo publicado: mayo 5, 2013
Until now all of the 3-terminal power IC voltage regulators have a fixed output voltage. In spite of this limitation their ease of use low cost and full on-chip overload protection have generated wide acceptance. Now with the introduction of the LM117 it is possible to use a single regulator for any output voltage from 1.2 V to 37 V at 1.5A. Selecting close-tolerance outp

Linea modelo

Serie: LM395 (2)

LM395T LM395T/NOPB

Clasificación del fabricante

Semiconductors > Power Drivers > Power Transistors