Datasheet Texas Instruments LM329 — Ficha de datos

Fabricante	Texas Instruments
Serie	LM329

Hojas de datos

Precios

Estado

Embalaje

Plan ecológico

Notas de aplicación

• Descargar
  AN-298 Isolation Techniques for Signal Conditioning (Rev. B)
  PDF, 685 Kb, Revisión: B, Archivo publicado: mayo 6, 2013
  This application note provides information and examples of isolation techniques for signal conditioning.
• Descargar
  IC Temp Sensor Provides Thermocouple Cold-Junction Compensation (Rev. B)
  PDF, 271 Kb, Revisión: B, Archivo publicado: abr 23, 2013
  Two circuits using the LM335 for thermocouple cold-junction compensation have been described. With asingle room temperature calibration, these circuits are accurate to В±3/4В°C over a 0В°C to 70В°C temperaturerange using J or K type thermocouples. In addition, a thermocouple amplifier using an LM335 for coldjunctioncompensation has been described for which worst case error can be as low as 1В°C p
• Descargar
  AN-301 Signal Conditioning for Sophisticated Transducers (Rev. B)
  PDF, 1.2 Mb, Revisión: B, Archivo publicado: mayo 6, 2013
  This application note discusses signal conditioning and applications information for a diverse group ofsophisticated and unusual transducers.
• Descargar
  AN-181 3-Terminal Regulator is Adjustable (Rev. B)
  PDF, 314 Kb, Revisión: B, Archivo publicado: mayo 5, 2013
  Until now all of the 3-terminal power IC voltage regulators have a fixed output voltage. In spite of this limitation their ease of use low cost and full on-chip overload protection have generated wide acceptance. Now with the introduction of the LM117 it is possible to use a single regulator for any output voltage from 1.2 V to 37 V at 1.5A. Selecting close-tolerance outp
• Descargar
  AN-256 Circuitry for Inexpensive Relative Humidity Measurement (Rev. B)
  PDF, 262 Kb, Revisión: B, Archivo publicado: mayo 6, 2013
  Of all common environmental parameters humidity is perhaps the least understood and most difficult tomeasure. The most common electronic humidity detection methods albeit highly accurate are not obviousand tend to be expensive and complex (See Box). Accurate humidity measurement is vital to a number ofdiverse areas including food processing paper and lumber production pollution monitor
• Descargar
  AN-263 Sine Wave Generation Techniques (Rev. C)
  PDF, 747 Kb, Revisión: C, Archivo publicado: abr 22, 2013
  This application note describes the sine wave generation techniques to control frequency amplitude anddistortion levels.
• Descargar
  TO-92 Packing Options / Ordering Instructions (Rev. A)
  PDF, 287 Kb, Revisión: A, Archivo publicado: jun 23, 2010
• Descargar
  Audio Applications of Linear Integrated Circuits
  PDF, 272 Kb, Archivo publicado: mayo 2, 2004
• Descargar
  AN-262 Applying Dual and Quad FET Op Amps (Rev. B)
  PDF, 1.1 Mb, Revisión: B, Archivo publicado: mayo 6, 2013
  The availability of dual and quad packaged FET op amps offers the designer all the traditional capabilitiesof FET op amps including low bias current and speed and some additional advantages. The cost-peramplifieris lower because of reduced package costs. This means that more amplifiers are available toimplement a function at a given cost making design easier. At the same time the availab
• Descargar
  High Voltage Adjustable Power Supplies
  PDF, 87 Kb, Archivo publicado: oct 3, 2002
• Descargar
  AN-284 Single-Supply Applications of CMOS MICRODACs (Rev. B)
  PDF, 271 Kb, Revisión: B, Archivo publicado: abr 22, 2013
  CMOS data acquisition and conversion products are becoming the ideal choice for microprocessorcontrolled analog systems. The use of CMOS allows the addition of more digital logic functionality on tothe same die as the analog circuitry to minimize external parts requirements. The inherently low powerconsumption is also a big factor for battery operation and low heat generation in large scale

Linea modelo

Clasificación del fabricante

• Semiconductors> Power Management> Voltage Reference> Shunt Voltage Reference