Datasheet Texas Instruments LM25115A — Ficha de datos
Fabricante | Texas Instruments |
Serie | LM25115A |
Regulador de poste lateral secundario / controlador síncrono de 42V con seguimiento de encendido / apagado
Hojas de datos
Secondary Side Post Regulator/DC-DC Converter with Power-Up/Pwr-Down Trac datasheet
PDF, 950 Kb, Revisión: B, Archivo publicado: abr 1, 2013
Extracto del documento
Precios
Estado
LM25115AMT/NOPB | LM25115AMTX/NOPB | |
---|---|---|
Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
Disponibilidad de muestra del fabricante | No | Sí |
Embalaje
LM25115AMT/NOPB | LM25115AMTX/NOPB | |
---|---|---|
N | 1 | 2 |
Pin | 16 | 16 |
Package Type | PW | PW |
Industry STD Term | TSSOP | TSSOP |
JEDEC Code | R-PDSO-G | R-PDSO-G |
Package QTY | 92 | 2500 |
Carrier | TUBE | LARGE T&R |
Device Marking | AMT | L25115 |
Width (mm) | 4.4 | 4.4 |
Length (mm) | 5 | 5 |
Thickness (mm) | 1 | 1 |
Pitch (mm) | .65 | .65 |
Max Height (mm) | 1.2 | 1.2 |
Mechanical Data | Descargar | Descargar |
Paramétricos
Parameters / Models | LM25115AMT/NOPB | LM25115AMTX/NOPB |
---|---|---|
Control Method | ValleyCurrent | ValleyCurrent |
Duty Cycle(Max), % | 85 | 85 |
Frequency(Max), kHz | 1000 | 1000 |
Frequency(Min), kHz | 50 | 50 |
Gate Drive(Typ), A | 2.5 | 2.5 |
Operating Temperature Range, C | -40 to 125 | -40 to 125 |
Package Group | TSSOP | TSSOP |
Rating | Catalog | Catalog |
Special Features | Frequency Synchronization,Soft Start,Synchronization Pin,Thermal Shutdown | Frequency Synchronization,Soft Start,Synchronization Pin,Thermal Shutdown |
Topology | Synchronous secondary-side post-regulator | Synchronous secondary-side post-regulator |
UVLO Thresholds On/Off, V | 4.15/4.0 | 4.15/4.0 |
Vin(Max), V | 42 | 42 |
Vin(Min), V | 4.5 | 4.5 |
Plan ecológico
LM25115AMT/NOPB | LM25115AMTX/NOPB | |
---|---|---|
RoHS | Obediente | Obediente |
Notas de aplicación
- Minimizing FET Losses For a High Input Rail Buck Converter (Rev. A)PDF, 168 Kb, Revisión: A, Archivo publicado: abr 23, 2013
Engineers often face the challenge of choosing the input voltage rail that works best for the DC-DCconverter at the point-of-load (POL). High voltage rails, above 12 V, usually demand intermediateregulation stages that reduce overall efficiency and add to cost. However, the new generation of regulatorand controller ICs afford POL regulation from these high input rails directly. Typically the - Reduce buck-converter EMI and voltage stress by minimizing inductive parasiticsPDF, 926 Kb, Archivo publicado: jul 21, 2016
Linea modelo
Serie: LM25115A (2)
Clasificación del fabricante
- Semiconductors> Power Management> Offline and Isolated DC/DC Controllers and Converters> PWM and Resonant Controller