Datasheet Texas Instruments LM101A-N — Ficha de datos

Fabricante	Texas Instruments
Serie	LM101A-N

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Parameters / Models	LM101AH	LM101AH/NOPB	LM101AJ
Additional Features	N/A	N/A	N/A
Architecture	Bipolar	Bipolar	Bipolar
CMRR(Min), dB	80	80	80
CMRR(Typ), dB	96	96	96
GBW(Typ), MHz	1	1	1
IIB(Max), pA	75000	75000	75000
Iq per channel(Max), mA	3	3	3
Iq per channel(Typ), mA	1.8	1.8	1.8
Number of Channels	1	1	1
Offset Drift(Typ), uV/C	3	3	3
Operating Temperature Range, C	-55 to 125	-55 to 125	-55 to 125
Output Current(Typ), mA	25	25	25
Package Group	TO-99	TO-99	CDIP
Package Size: mm2:W x L, PKG	8TO-99: 80 mm2: 8.96 x 8.96(TO-99)	8TO-99: 80 mm2: 8.96 x 8.96(TO-99)	See datasheet (CDIP)
Rail-to-Rail	In to V+	In to V+	In to V+
Rating	Catalog	Catalog	Catalog
Slew Rate(Typ), V/us	0.5	0.5	0.5
Total Supply Voltage(Max), +5V=5, +/-5V=10	44	44	44
Total Supply Voltage(Min), +5V=5, +/-5V=10	10	10	10
Vn at 1kHz(Typ), nV/rtHz	15	15	15
Vos (Offset Voltage @ 25C)(Max), mV	2	2	2

Plan ecológico

Notas de aplicación

• Descargar
  AN-71 Micropower Circuits Using the LM4250 Programmable Op Amp (Rev. B)
  PDF, 536 Kb, Revisión: B, Archivo publicado: mayo 1, 2013
  This application report describes the circuit operation of the Texas Instruments LM4250, various methodsof biasing the device, frequency response considerations, and some circuit applications exercising theunique characteristics of the LM4250.
• Descargar
  LM118 Op Amp Slews 70 V/sec
  PDF, 118 Kb, Archivo publicado: oct 1, 2002
  LM118 Op Amp Slews 70 V/ГѓВґsec
• Descargar
  AN-30 Log Converters (Rev. B)
  PDF, 370 Kb, Revisión: B, Archivo publicado: mayo 1, 2013
  One of the most predictable non-linear elements commonly available is the bipolar transistor. Therelationship between collector current and emitter base voltage is precisely logarithmic from currentsbelow one picoamp to currents above one milliamp. Using a matched pair of transistors and integratedcircuit operational amplifiers it is relatively easy to construct a linear to logarithmic conv
• Descargar
  AN-20 An Applications Guide for Op Amps (Rev. C)
  PDF, 727 Kb, Revisión: C, Archivo publicado: mayo 1, 2013
  This application note is a guide for Op Amps. The circuits discussed herein are illustrative of the versatilityof the integrated operational amplifier and provide a guide to a number of useful applications. Thecautions noted in each section will show the more common pitfalls encountered in amplifier usage.
• Descargar
  AN-24 A Simplified Test Set for Op Amp Characterization
  PDF, 1.2 Mb, Archivo publicado: mayo 10, 2004
  Application Note 24 A Simplified Test Set for Op Amp Characterization
• Descargar
  AN-29 IC Op Amp Beats FETs on Input Current (Rev. B)
  PDF, 965 Kb, Revisión: B, Archivo publicado: mayo 1, 2013
  This application note describes a monolithic operational amplifier which has input error currents in theorder of 100 pA over a в€’55В°C to 125В°C temperature range. Instead of FETs, the circuit used bipolartransistors with current gains of 5000 so that offset voltage and drift are not degraded. A powerconsumption of 1 mW at low voltage is also featured.A number of novel circuits that make use
• Descargar
  AN-32 FET Circuit Applications
  PDF, 254 Kb, Archivo publicado: mayo 10, 2004
• Descargar
  AN-31 Op Amp Circuit Collection (Rev. B)
  PDF, 2.3 Mb, Revisión: B, Archivo publicado: mayo 1, 2013
  This application report provides basic circuits of the Texas Instruments op amp collection.
• Descargar
  AN-4 Monolithic Op Amp—The Universal Linear Component (Rev. B)
  PDF, 579 Kb, Revisión: B, Archivo publicado: mayo 1, 2013
  Operational amplifiers are undoubtedly the easiest and best way of performing a wide range of linearfunctions from simple amplification to complex analog computation. The cost of monolithic amplifiers isnow less than $2.00, in large quantities, which makes it attractive to design them into circuits where theywould not otherwise be considered. Yet low cost is not the only attraction of monoli
• Descargar
  AN-241 Working with High Impedance Op Amps
  PDF, 169 Kb, Archivo publicado: mayo 3, 2004
  Application Note 241 Working with High Impedance Op Amps
• Descargar
  AN-A The Monolithic Operational Amplifier: A Tutorial Study
  PDF, 379 Kb, Archivo publicado: mayo 11, 2004
• Descargar
  General Purpose Power Supply
  PDF, 94 Kb, Archivo publicado: oct 3, 2002
• Descargar
  AN-46 The Phase Locked Loop IC as a Communication System Building Block
  PDF, 314 Kb, Archivo publicado: mayo 14, 2004
• Descargar
  AN-79 IC Preamplifier Challenges Choppers on Drift (Rev. B)
  PDF, 940 Kb, Revisión: B, Archivo publicado: mayo 1, 2013
  Since the introduction of monolithic IC amplifiers there has been a continual improvement in DC accuracy.Bias currents have been decreased by 5 orders of magnitude over the past 5 years. Low offset voltagedrift is also necessary in a high accuracy circuits. This is evidenced by the popularity of low drift amplifiertypes as well as the requests for selected low-drift op amps. However until n
• Descargar
  Predicting Op Amp Slew Rate Limited Response
  PDF, 139 Kb, Archivo publicado: oct 7, 2002
• Descargar
  Get Fast Stable Response From Improved Unity-Gain Followers
  PDF, 107 Kb, Archivo publicado: oct 2, 2002
• Descargar
  AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A)
  PDF, 814 Kb, Revisión: A, Archivo publicado: mayo 6, 2013
  The LM340-XX are three terminal 1.0A positive voltage regulators with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However by adding a few parts one may improve the transient response provide for avariable output voltage or increase the output current. Included on the chip are all of t

Linea modelo

Clasificación del fabricante

• Semiconductors> Space & High Reliability> Amplifier> Operational Amplifiers