Datasheet Texas Instruments ISO15MDWR — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | ISO15 |
| Numero de parte | ISO15MDWR |
Transceptores RS-485 semidúplex de 3,3 V aislados 16-SOIC -55 a 125
Hojas de datos
ISOx5 Isolated 3.3-V Half- and Full-Duplex RS-485 Transceivers datasheet
PDF, 1.1 Mb, Revisión: G, Archivo publicado: marzo 9, 2015
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 16 |
| Package Type | DW |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | ISO15M |
| Width (mm) | 7.5 |
| Length (mm) | 10.3 |
| Thickness (mm) | 2.35 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 2.65 |
| Mechanical Data | Descargar |
Paramétricos
| CSA 60950-1 Basic Working | 280 Vrms |
| CSA 61010-1 Basic Working | N/A Vrms |
| CSA 61010-1 Reinforced Working | N/A Vrms |
| CSA Isolation Rating | 2500 Vrms |
| DIN V VDE V 0884-10 Working Voltage | 560 Vpk |
| DIN V VDE V 0884-10 Transient Overvoltage Rating | 4000 Vpk |
| Datarate | 1 Mbps |
| Duplex | Half |
| ESD | 16 kV |
| Fail Safe | Idle,Open,Short |
| Integrated Transformer Driver | No |
| Isolation Rating | 2500 Vrms |
| Number of Nodes | 256 |
| Operating Temperature Range | -40 to 85,-55 to 125 C |
| Package Group | SOIC |
| Package Size: mm2:W x L | 16SOIC: 106 mm2: 10.3 x 10.3(SOIC) PKG |
| Surge Voltage Rating | 4000 Vpk |
| VCC1(Max) | 3.6 V |
| VCC1(Min) | 3.15 V |
| VCC2(Max) | 3.6 V |
| VCC2(Min) | 3.15 V |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: ISO485EVM
ISO485EVM Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- 3Q 2012 Issue Analog Applications JournalPDF, 4.5 Mb, Archivo publicado: jul 17, 2012
- Isolated RS-485 Reference DesignPDF, 80 Kb, Archivo publicado: oct 28, 2009
This design note presents the reference designs of isolated RS-485 nodes, using bus voltages of 3.3 V and 5 V. Various transceivers are used to satisfy the requirements for low, medium, and high data rates, as well as to accommodate the need for half- and full-duplex operation.
Linea modelo
Clasificación del fabricante
- Semiconductors > Isolation > Isolated RS-485 Transceivers