Datasheet Texas Instruments DS25BR110 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | DS25BR110 |
3.125 Gbps LVDS Buffer con ecualización de recepción
Hojas de datos
DS25BR110 3.125 Gbps LVDS Buffer with Receive Equalization datasheet
PDF, 879 Kb, Revisión: E, Archivo publicado: abr 14, 2013
Extracto del documento
Precios
Estado
| DS25BR110TSD/NOPB | DS25BR110TSDX/NOPB | |
|---|---|---|
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No | Sí |
Embalaje
| DS25BR110TSD/NOPB | DS25BR110TSDX/NOPB | |
|---|---|---|
| N | 1 | 2 |
| Pin | 8 | 8 |
| Package Type | NGQ | NGQ |
| Industry STD Term | WSON | WSON |
| JEDEC Code | S-PDSO-N | S-PDSO-N |
| Package QTY | 1000 | 4500 |
| Carrier | SMALL T&R | LARGE T&R |
| Device Marking | 2R110 | 2R110 |
| Width (mm) | 3 | 3 |
| Length (mm) | 3 | 3 |
| Thickness (mm) | .8 | .8 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | .8 | .8 |
| Mechanical Data | Descargar | Descargar |
Paramétricos
| Parameters / Models | DS25BR110TSD/NOPB | DS25BR110TSDX/NOPB |
|---|---|---|
| Device Type | Buffer | Buffer |
| ESD HBM, kV | 7 | 7 |
| Function | Equalizer | Equalizer |
| ICC(Max), mA | 43 | 43 |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 |
| Package Group | WSON | WSON |
| Package Size: mm2:W x L, PKG | See datasheet (WSON) | See datasheet (WSON) |
| Protocols | LVDS | LVDS |
Plan ecológico
| DS25BR110TSD/NOPB | DS25BR110TSDX/NOPB | |
|---|---|---|
| RoHS | Obediente | Obediente |
Notas de aplicación
- Extending the Signal Path Over Data Trans Lines Using LVDS Signal ConditioningPDF, 575 Kb, Archivo publicado: agosto 2, 2007
- LVDS Repeaters and Crosspoints Extend the Reach of FPD-Link II Interfaces (Rev. A)PDF, 101 Kb, Revisión: A, Archivo publicado: abr 29, 2013
This application note introduces Texas Instrument’s LVDS devices with built-in pre-emphasis andequalization circuits, recommends when it makes sense to employ them with the FPD-Link II SER/DES,shows how to optimally interface them to the SER/DES, and discusses distance gains that may berealized with their signal enhancing functions. - AN-1957 LVDS Signal Conditioners Reduce Data-Dependent Jitter (Rev. A)PDF, 275 Kb, Revisión: A, Archivo publicado: abr 26, 2013
Jitter is a phenomenon troubling many designers of high-speed interfaces. It reduces available timingmargin, limits transmission distance between a transmitter and a receiver, and increases system cost bydemanding better performing and more expensive interconnects. LVDS interfaces are not spared fromthese ill effects as they now operate at bit rates exceeding the 3 Gbps mark. Texas Instrumen
Linea modelo
Serie: DS25BR110 (2)
Clasificación del fabricante
- Semiconductors> Interface> Signal Conditioners> Equalizer