Datasheet Texas Instruments CC430F5133 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | CC430F5133 |
MCU de 16 bits de potencia ultra baja, flash de 8 KB, RAM de 2 KB, radio CC1101, AES-128, ADC de 12 bits, USCI
Hojas de datos
CC430F613x, CC430F612x, CC430F513x MSP430 SoC With RF Core datasheet
PDF, 2.0 Mb, Revisión: H, Archivo publicado: sept 6, 2013
Extracto del documento
Precios
Estado
| CC430F5133IRGZ | CC430F5133IRGZR | CC430F5133IRGZT | |
|---|---|---|---|
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí | No | No |
Embalaje
| CC430F5133IRGZ | CC430F5133IRGZR | CC430F5133IRGZT | |
|---|---|---|---|
| N | 1 | 2 | 3 |
| Pin | 48 | 48 | 48 |
| Package Type | RGZ | RGZ | RGZ |
| Industry STD Term | VQFN | VQFN | VQFN |
| JEDEC Code | S-PQFP-N | S-PQFP-N | S-PQFP-N |
| Package QTY | 52 | 2500 | 250 |
| Carrier | TUBE | LARGE T&R | SMALL T&R |
| Device Marking | CC430 | F5133 | F5133 |
| Width (mm) | 7 | 7 | 7 |
| Length (mm) | 7 | 7 | 7 |
| Thickness (mm) | .9 | .9 | .9 |
| Pitch (mm) | .5 | .5 | .5 |
| Max Height (mm) | 1 | 1 | 1 |
| Mechanical Data | Descargar | Descargar | Descargar |
Paramétricos
| Parameters / Models | CC430F5133IRGZ | CC430F5133IRGZR | CC430F5133IRGZT |
|---|---|---|---|
| ADC | ADC12 - 6ch | ADC12 - 6ch | ADC12 - 6ch |
| Additional Features | Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset | Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset | Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset |
| Antenna Connection | Differential | Differential | Differential |
| CPU | MSP430 | MSP430 | MSP430 |
| CPU Core | MSP430 | MSP430 | MSP430 |
| CPU Processing Power Consumption, uA/MHz | 160 | 160 | 160 |
| Data Rate (Max), kbps | 500 | 500 | 500 |
| Flash, KB | 8 | 8 | 8 |
| Frequency, MHz | 20 | 20 | 20 |
| Frequency Bands, MHz | 315,433,779,868,915,920 | 315,433,779,868,915,920 | 315,433,779,868,915,920 |
| GPIO | 30 | 30 | 30 |
| I2C | 1 | 1 | 1 |
| Key Applications | Data logging, Remote monitoring systems, Wireless sensor networks | Data logging, Remote monitoring systems, Wireless sensor networks | Data logging, Remote monitoring systems, Wireless sensor networks |
| Max VCC | 3.6 | 3.6 | 3.6 |
| Min VCC | 1.8 | 1.8 | 1.8 |
| Non-volatile Memory, KB | 8 | 8 | 8 |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 | -40 to 85 |
| Package Group | VQFN | VQFN | VQFN |
| Package Size: mm2:W x L, PKG | 48VQFN: 49 mm2: 7 x 7(VQFN) | 48VQFN: 49 mm2: 7 x 7(VQFN) | 48VQFN: 49 mm2: 7 x 7(VQFN) |
| RAM, KB | 2 | 2 | 2 |
| RF standard supported | Proprietary (Sub 1GHz) | Proprietary (Sub 1GHz) | Proprietary (Sub 1GHz) |
| ROM, KB | N/A | N/A | N/A |
| RX Current (Lowest), mA | 15 | 15 | 15 |
| SPI | 1 | 1 | 1 |
| SRAM, kB | 2 | 2 | 2 |
| Security | AES | AES | AES |
| Standard version | N/A | N/A | N/A |
| Standby Current, uA | 1 | 1 | 1 |
| Timers - 16-bit | 2 | 2 | 2 |
| UART | 1 | 1 | 1 |
| Wake-on radio | Yes | Yes | Yes |
| Wakeup time from standby, us | 240 | 240 | 240 |
Plan ecológico
| CC430F5133IRGZ | CC430F5133IRGZR | CC430F5133IRGZT | |
|---|---|---|---|
| RoHS | Obediente | Obediente | Obediente |
Notas de aplicación
- CC430 Wake-On-Radio Functionality (Rev. A)PDF, 210 Kb, Revisión: A, Archivo publicado: jul 10, 2012
The Wake-On-Radio (WOR) feature of the CC430 is a recommended method for conserving power in wireless systems in which the radio periodically wakes up from SLEEP mode and listens for incoming packets. This application note describes the theory, RF1A registers, and timing of the WOR feature. It also describes the special use case of the CC430F61xx and CC430F51xx devices. This application note concl - AN088 -- SimpliciTI on the CC430 – Practical ModificationsPDF, 89 Kb, Archivo publicado: marzo 10, 2010
- CC430-Based Wireless Mesh Network Mains SwitchPDF, 966 Kb, Archivo publicado: mayo 20, 2011
This application report describes a simple wireless mesh network running on a number of wireless power points. Each power point contains a timer switch and a power monitor. The mesh network is self learning. A data concentrator works through the various power points it discovers and forms a network. It can then program the on/off timing of the power point's switch and monitor its power consumption - CC430 RF Examples (Rev. C)PDF, 117 Kb, Revisión: C, Archivo publicado: sept 7, 2012
This application report describes the library components and implementation of the RF code examples for the CC430F61xx and CC430F51xx sub-1GHz system-on-chip (SoC) devices. The examples include support for packet-handling modes, including variable and fixed length filtering, as well as the asynchronous and synchronous modes of communication. The document also explains the key RF configuration regi - AN105 -- Using 1W RF3858 Front End with CC1101 Under FCC 15.247 (Rev. A)PDF, 983 Kb, Revisión: A, Archivo publicado: agosto 3, 2011
- Using a DC-DC Converter to Reduce Power (Current) Consumption In CC430 SystemsPDF, 4.6 Mb, Archivo publicado: jul 5, 2011
This application report describes a method to reduce power consumption in CC430-based systems by using a step-down converter TPS62730. - AN094 -- Using the CC1190 Front End with CC1101 under EN 300 220PDF, 371 Kb, Archivo publicado: enero 11, 2011
- DN036 -- CC1101+CC1190 600 kbps Data Rate, +19 dBm Transmit (Rev. A)PDF, 139 Kb, Revisión: A, Archivo publicado: nov 7, 2011
- AN072 -- Using the TAI-SAW TA0801A SAW Filter and External PA (Rev. A)PDF, 359 Kb, Revisión: A, Archivo publicado: agosto 19, 2009
- AN050 -- Using the CC1101 in the European 868MHz SRD band (Rev. B)PDF, 223 Kb, Revisión: B, Archivo publicado: sept 11, 2009
- DN508 -- Frequency Scanning using CC430Fx, CC110x, and CC111xFxPDF, 65 Kb, Archivo publicado: enero 25, 2010
The purpose of this design note is to show the necessary steps to successfully scan through a frequency band covering n numbers of channels, and find the strongest signal in the band. - DN022 -- CC110x CC111x OOK ASK Register Settings (Rev. E)PDF, 532 Kb, Revisión: E, Archivo publicado: marzo 8, 2012
- DN005 -- CC11xx Sensitivity versus Frequency Offset and Crystal Accuracy (Rev. C)PDF, 96 Kb, Revisión: C, Archivo publicado: agosto 20, 2009
- DN016 -- Compact Antenna Solution for 868/915 MHz (Rev. B)PDF, 832 Kb, Revisión: B, Archivo publicado: agosto 20, 2009
- DN032 -- Options for Cost Optimized CC11xx MatchingPDF, 112 Kb, Archivo publicado: agosto 25, 2010
- DN019 -- Powering Low-Power RF Products (Rev. B)PDF, 327 Kb, Revisión: B, Archivo publicado: sept 18, 2009
- DN507 -- FEC DecodingPDF, 264 Kb, Archivo publicado: enero 28, 2010
The purpose of this design note is to show how the FEC decoding implemented in HW on the CC1100, CC1100E, CC1101, CC1110Fx, CC1111Fx, CC1150, CC2500, CC2510Fx, CC2511Fx, and CC2550 can be implemented in SW. This is in particular very important for the CC430Fx device, which has the same radio as the CC1101 and CC1110/11Fx but without HW FEC included. - DN502 -- CRC Implementation (Rev. D)PDF, 55 Kb, Revisión: D, Archivo publicado: oct 27, 2009
- DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E)PDF, 1.0 Mb, Revisión: E, Archivo publicado: feb 22, 2013
- DN033 - Mitsubishi Ceramic Antenna for 868 MHz, 915 MHz & 955 (Rev. A)PDF, 685 Kb, Revisión: A, Archivo publicado: sept 14, 2010
- AN001 -- SRD regulations for license free transceiver operationPDF, 260 Kb, Archivo publicado: feb 1, 2006
- DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C)PDF, 369 Kb, Revisión: C, Archivo publicado: agosto 30, 2011
- DN002 -- Practical Sensitivity TestingPDF, 364 Kb, Archivo publicado: dic 20, 2006
- AN003 -- SRD AntennasPDF, 358 Kb, Archivo publicado: feb 1, 2006
- DN000 - Design Note Overview (Rev. T)PDF, 126 Kb, Revisión: T, Archivo publicado: oct 12, 2011
- DN031 -- CC-Antenna-DK Documentation and Antenna Measurements SummaryPDF, 2.3 Mb, Archivo publicado: agosto 26, 2010
DN031 -- Design Notes - AN058 -- Antenna Selection Guide (Rev. B)PDF, 1.8 Mb, Revisión: B, Archivo publicado: oct 6, 2010
- Using the USCI I2C Master (Rev. A)PDF, 69 Kb, Revisión: A, Archivo publicado: marzo 11, 2015
This document describes how to use the I2C master function set for MSP430в„ў devices with the USCI module. These functions can be used by MSP430 master devices to ensure proper initialization of the USCI module and provide I2C transmit and receive functionality. A similar version with DMA support has also been included. The USCI I2C master function set only supports single-master transmitter or rece - DN035 -- Antenna Quick Guide (Rev. A)PDF, 138 Kb, Revisión: A, Archivo publicado: feb 12, 2013
- Design Considerations When Using the MSP430 Graphics LibraryPDF, 475 Kb, Archivo publicado: oct 5, 2012
LCDs are a growing commodity in todays market with products as diverse as children's toys to medical devices. Modern LCDs, along with the graphics displayed on them, are growing in complexity. A graphics library can simplify and accelerate development while creating the desired user experience. TI provides the MSP430 Graphics Library for use in developing products with the MSP430в„ў MCU. This
Linea modelo
Serie: CC430F5133 (3)
Clasificación del fabricante
- Semiconductors> Microcontrollers (MCU)> Other Microcontrollers> CC430