Datasheet Texas Instruments CC2650 — Ficha de datos

Fabricante	Texas Instruments
Serie	CC2650

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Parameters / Models	CC2650F128RGZR	CC2650F128RGZT	CC2650F128RHBR	CC2650F128RHBT	CC2650F128RSMR	CC2650F128RSMT
Bluetooth Standard	Bluetooth 4.2	Bluetooth 4.2	Bluetooth 4.2	Bluetooth 4.2	Bluetooth 4.2	Bluetooth 4.2
Data Rate(Max), kbps	5000	5000	5000	5000	5000	5000
Device Type	Wireless MCU	Wireless MCU	Wireless MCU	Wireless MCU	Wireless MCU	Wireless MCU
Package Group	VQFN	VQFN	VQFN	VQFN	VQFN	VQFN
Package Size: mm2:W x L, PKG	32VQFN: 16 mm2: 4 x 4(VQFN)	32VQFN: 16 mm2: 4 x 4(VQFN)	32VQFN: 16 mm2: 4 x 4(VQFN)	32VQFN: 16 mm2: 4 x 4(VQFN)	32VQFN: 16 mm2: 4 x 4(VQFN)	32VQFN: 16 mm2: 4 x 4(VQFN)
Rating	Catalog	Catalog	Catalog	Catalog	Catalog	Catalog
Technology	6LoWPAN, Bluetooth Low Energy, RF4CE, ZigBee	6LoWPAN, Bluetooth Low Energy, RF4CE, ZigBee	6LoWPAN, Bluetooth Low Energy, RF4CE, ZigBee	6LoWPAN, Bluetooth Low Energy, RF4CE, ZigBee	6LoWPAN, Bluetooth Low Energy, RF4CE, ZigBee	6LoWPAN, Bluetooth Low Energy, RF4CE, ZigBee
Throughput(Max), Mbps	5	5	5	5	5	5

Plan ecológico

Notas de aplicación

• Descargar
  Configuring the CC2640 for BluetoothВ® Direct Test Mode
  PDF, 2.1 Mb, Archivo publicado: dic 6, 2016
• Descargar
  Implementing Eddystone Bluetooth Smart Beacons Using the TI BLE-Stack (Rev. A)
  PDF, 229 Kb, Revisión: A, Archivo publicado: oct 19, 2016
• Descargar
  Measuring Bluetooth Low Energy Power Consumption (Rev. C)
  PDF, 5.0 Mb, Revisión: C, Archivo publicado: enero 10, 2017
  This application report describes the setup and procedures to measure power consumption on CC2650,CC2640 and CC2640R2F devices operating as a Bluetooth® low energy “Peripheral” device.
• Descargar
  Running BluetoothВ® Low Energy on CC2640 Without 32 kHz Crystal (Rev. B)
  PDF, 82 Kb, Revisión: B, Archivo publicado: abr 5, 2017
  This application report explains how you can configure the SimpleLinkв„ў Bluetooth low energy CC2640 wireless MCU, CC2640R2F wireless MCU and multi-standard CC2650 wireless MCU to run the Bluetooth low energy (BLE) software stack without the need for a 32 kHz crystal.
• Descargar
  Using the Wireless SimpleLink CC26xx in Ext Regulator Mode With the TPS62740
  PDF, 301 Kb, Archivo publicado: nov 19, 2015
  This application report describes the set-up and expected performance when using the CC2640 in external regulator mode together with the TPS62740. Although this application report focuses on the CC2640 and BluetoothВ® Smart applications, the solutions provided are also applicable for the entire CC26xx family and its supported protocols. Note that waveforms and power consumption measurement r
• Descargar
  Voice Over Remote Control
  PDF, 112 Kb, Archivo publicado: mayo 19, 2016
  This application report describes the voice over RF protocol used for Texas Instruments Bluetooth В® low energy (BLE) and RF4CE remote control solutions.
• Descargar
  Using GCC/GDB With SimpleLink CC26xx
  PDF, 1.0 Mb, Archivo publicado: feb 23, 2015
  This application report describes how to set up an open source software-based development environment for the SimpleLink CC26xx and CC13xx wireless MCUs using Eclipse as integrated development environment (IDE).
• Descargar
  Crystal Oscillator and Crystal Selection for the CC26xx and CC13xx Wireless MCUs (Rev. F)
  PDF, 886 Kb, Revisión: F, Archivo publicado: agosto 10, 2017
• Descargar
  CC2640 Wireless MCU DC Supply Evaluation
  PDF, 1.3 Mb, Archivo publicado: oct 5, 2015
  CC2640 Wireless MCU DC Supply Evaluation /WTBU/WCS/Bluetooth/AppReports/SWRA494/SWRA494
• Descargar
  ETSI EN 300 328 Blocking Test for Bluetooth Low Energy
  PDF, 2.4 Mb, Archivo publicado: feb 8, 2017
  This application report describes the setup and procedure used to measure the new ETSI EN receiver (RX) blocking test added to version v2.1.1 of the ETSI EN 300 328 harmonized standard.
• Descargar
  CC2538/CC26xx Bootloader Interface (Rev. A)
  PDF, 277 Kb, Revisión: A, Archivo publicado: mayo 21, 2015
  This application report provides a brief overview on the serial bootloader that resides in ROM on the CC2538 and CC13xx/CC26xx devices. This document shows how the bootloader protocol can be used to perform basic operations like erasing and programming the flash of the devices. The device bootloaders support universal asynchronous receiver/transmitter (UART) and serial peripheral interface (SPI) a
• Descargar
  CC-Antenna-DK2 and Antenna Measurements Summary
  PDF, 14.8 Mb, Archivo publicado: marzo 3, 2016
  The purpose of the antenna development kit (CC-Antenna-DK2) is to ease the decision of which type of low-cost antenna can be implemented as well as give an estimation of the performance that can be achieved.

Linea modelo

Clasificación del fabricante

• Semiconductors> Wireless Connectivity> Multi-Standard> SimpleLink CC2650 (BLE/ZigBee/RF4CE/6LoWPAN)