Datasheet Texas Instruments CC2640R2FRGZR — Ficha de datos

Fabricante	Texas Instruments
Serie	CC2640R2F
Numero de parte	CC2640R2FRGZR

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Plan ecológico

Kits de diseño y Módulos de evaluación

• JTAG Emulators/ Analyzers: TMDSEMU200-U
  XDS200 USB Debug Probe
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
• Evaluation Modules & Boards: LAUNCHXL-CC26X2R1
  SimpleLinkВ™ CC26x2 Wireless MCU LaunchPadВ™ Development Kit
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar
• Development Kits: LAUNCHXL-CC2640R2
  SimpleLinkВ™ BluetoothВ® low energy CC2640R2F wireless MCU LaunchPadВ™ development kit
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar
• JTAG Emulators/ Analyzers: TMDSEMU110-ETH
  XDS110 EnergyTraceв„ў High Dynamic Range (ETHDR) Debug Probe Add-On
  Estado del ciclo de vida: Vista previa (El dispositivo ha sido anunciado pero no está en producción. Las muestras pueden o no estar disponibles)
  
• JTAG Emulators/ Analyzers: TMDSEMU110-U
  XDS110 JTAG Debug Probe
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar
  • Descargar

Notas de aplicación

• Descargar
  Increase RAM Size on the CC2640R2F Bluetooth low energy Wireless MCU
  PDF, 130 Kb, Archivo publicado: marzo 23, 2017
  This application report documents ways to increase the available random access memory (RAM) for your application on the CC2640R2F SimpleLinkв„ў Bluetooth low energy microcontroller. By moving initialized data or compiled code from the SRAM into other parts of the memory, the available SRAM is increased. This application report also highlights some of the tools found in the SimpleLink CC2640R2
• Descargar
  Hardware Migration From CC2640F128 to CC2640R2F
  PDF, 27 Kb, Archivo publicado: enero 31, 2017
  This application report describes the required changes when moving from the SimpleLinkв„ў CC2640F128 to the SimpleLink CC2640R2F wireless MCU.
• Descargar
  Implementing Eddystone Bluetooth Smart Beacons Using the TI BLE-Stack (Rev. A)
  PDF, 229 Kb, Revisión: A, Archivo publicado: oct 19, 2016
• Descargar
  Running BluetoothВ® Low Energy on CC2640 Without 32 kHz Crystal (Rev. B)
  PDF, 82 Kb, Revisión: B, Archivo publicado: abr 5, 2017
  This application report explains how you can configure the SimpleLinkв„ў Bluetooth low energy CC2640 wireless MCU, CC2640R2F wireless MCU and multi-standard CC2650 wireless MCU to run the Bluetooth low energy (BLE) software stack without the need for a 32 kHz crystal.
• Descargar
  Design Considerations for High Temperature Applications Using the CC2640R2F-Q1
  PDF, 41 Kb, Archivo publicado: agosto 15, 2017
  When creating an application using the CC2640R2F-Q1 targeting operation in high ambient temperatures, there are a few considerations that have to be made. The goal of this application report is to make these considerations clear to the developer.
• Descargar
  Measuring Bluetooth Low Energy Power Consumption (Rev. C)
  PDF, 5.0 Mb, Revisión: C, Archivo publicado: enero 10, 2017
  This application report describes the setup and procedures to measure power consumption on CC2650,CC2640 and CC2640R2F devices operating as a Bluetooth® low energy “Peripheral” device.
• Descargar
  Johanson Balun for the CC26xx Device Family
  PDF, 279 Kb, Archivo publicado: agosto 7, 2017
  This application report describes the implementation, active measurements, schematics, and design files when pairing Johanson Technology Inc's 2450BM14G0011 impedance-matched integrated balun-filter with Texas Instruments' CC26xx family of cost-effective, ultra-low power, 2.4-GHz wireless MCUs.
• Descargar
  Using the Wireless SimpleLink CC26xx in Ext Regulator Mode With the TPS62740
  PDF, 301 Kb, Archivo publicado: nov 19, 2015
  This application report describes the set-up and expected performance when using the CC2640 in external regulator mode together with the TPS62740. Although this application report focuses on the CC2640 and BluetoothВ® Smart applications, the solutions provided are also applicable for the entire CC26xx family and its supported protocols. Note that waveforms and power consumption measurement r
• Descargar
  Voice Over Remote Control
  PDF, 112 Kb, Archivo publicado: mayo 19, 2016
  This application report describes the voice over RF protocol used for Texas Instruments Bluetooth В® low energy (BLE) and RF4CE remote control solutions.
• Descargar
  Using GCC/GDB With SimpleLink CC26xx
  PDF, 1.0 Mb, Archivo publicado: feb 23, 2015
  This application report describes how to set up an open source software-based development environment for the SimpleLink CC26xx and CC13xx wireless MCUs using Eclipse as integrated development environment (IDE).
• Descargar
  CC2640 Wireless MCU DC Supply Evaluation
  PDF, 1.3 Mb, Archivo publicado: oct 5, 2015
  CC2640 Wireless MCU DC Supply Evaluation /WTBU/WCS/Bluetooth/AppReports/SWRA494/SWRA494
• Descargar
  Crystal Oscillator and Crystal Selection for the CC26xx and CC13xx Wireless MCUs (Rev. F)
  PDF, 886 Kb, Revisión: F, Archivo publicado: agosto 10, 2017
• Descargar
  CC2538/CC26xx Bootloader Interface (Rev. A)
  PDF, 277 Kb, Revisión: A, Archivo publicado: mayo 21, 2015
  This application report provides a brief overview on the serial bootloader that resides in ROM on the CC2538 and CC13xx/CC26xx devices. This document shows how the bootloader protocol can be used to perform basic operations like erasing and programming the flash of the devices. The device bootloaders support universal asynchronous receiver/transmitter (UART) and serial peripheral interface (SPI) a
• Descargar
  ETSI EN 300 328 Blocking Test for Bluetooth Low Energy
  PDF, 2.4 Mb, Archivo publicado: feb 8, 2017
  This application report describes the setup and procedure used to measure the new ETSI EN receiver (RX) blocking test added to version v2.1.1 of the ETSI EN 300 328 harmonized standard.
• Descargar
  CC-Antenna-DK2 and Antenna Measurements Summary
  PDF, 14.8 Mb, Archivo publicado: marzo 3, 2016
  The purpose of the antenna development kit (CC-Antenna-DK2) is to ease the decision of which type of low-cost antenna can be implemented as well as give an estimation of the performance that can be achieved.

Linea modelo

Clasificación del fabricante

• Semiconductors > Wireless Connectivity > SimpleLink Solutions > Wireless Microcontrollers