Datasheet Texas Instruments BQ27010DRKRG4 — Ficha de datos

Hojas de datos

Precios

Estado

Embalaje

Reemplazos

Plan ecológico

Kits de diseño y Módulos de evaluación

• Evaluation Modules & Boards: BQ27010EVM
  Single-Cell Battery Fuel Gauge
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar
• Evaluation Modules & Boards: BQ27X00-TESTER
  Test System for BQ27000 BQ27200 Based Circuit Boards
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
• Evaluation Modules & Boards: EV2300
  USB-Based PC Interface Board for Battery Fuel (Gas) Gauge Evaluation
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar

Notas de aplicación

• Descargar
  Configuring the bq27010/210 for Gas Gauge Applications
  PDF, 252 Kb, Archivo publicado: feb 23, 2007
  Accurate performance of the bq27x10 gas gauge requires that the 10 user-configurable EEPROM coefficients be programmed to values that reflect the appropriate host system and battery characteristics. This application report provides the basis for determining the optimal EEPROM coefficients from the host system operational characteristics and battery characterization data. Appendix A specifically ad
• Descargar
  Transition From Prior bqJunior Gauges to the bq27x10
  PDF, 64 Kb, Archivo publicado: jul 17, 2007
• Descargar
  Using the bq27x00 With a Primary Cell Battery
  PDF, 42 Kb, Archivo publicado: dic 15, 2005
  The bq27x00 is an accurate coulomb counter and contains algorithms to dynamically compensate the available capacity for temperature and discharge rate. If direct drive from the gauge to an LED display is not required, the bq27x00 can be used as an accurate gas gauge solution for a primary cell battery. Although the bq27x00 was designed for a single-cell rechargeable lithium-ion or lithium-polymer
• Descargar
  Multicell Li-Ion and Li-Pol Battery Gas-Gauge Application Using the bqJunior
  PDF, 58 Kb, Archivo publicado: mayo 26, 2006
  The bqJuniorв„ў series of gas gauges are designed to operate from a single-cell, lithium-ion or lithium-polymer battery. Many applications that could benefit from using these gas gauges use two or more lithium cells in series, where the battery voltage exceeds the operating voltage for the bqJuniorв„ў gas gauges. This application report describes a low-component count solution for using th
• Descargar
  Building a Superior Battery Monitor with the bq27x00
  PDF, 43 Kb, Archivo publicado: jun 20, 2005
  The bq27x00 is a complete gas gauge solution for lithium-ion and lithium-polymer batteries. The bq27x00 also has internal registers and control commands that enable the host to use it as a battery monitor. A battery gas gauge solution can be built one of two ways: ignore all algorithms built into the bq27x00 and use the primitive functions to build a fully customized solution, or use some of the h
• Descargar
  Battery Authentication and Security Schemes (Rev. A)
  PDF, 52 Kb, Revisión: A, Archivo publicado: jul 17, 2014
• Descargar
  HDQ Communication Basics (Rev. A)
  PDF, 103 Kb, Revisión: A, Archivo publicado: sept 18, 2008
  This report compares the communication timing specifications for the different battery gas gauge and battery monitor products. It discusses some of the interface requirements necessary for robust HDQ communication, such as the need for a break prior to each communication, how to reliably read 16-bit dynamic values over the 8-bit bus, and the need for some noise filtering on the HDQ line. It also
• Descargar
  ESD and RF Mitigation in Handheld Battery Pack Electronics
  PDF, 68 Kb, Archivo publicado: marzo 6, 2008
  It is imperative to protect the electronics in a consumer-removable battery pack from ESD damage. Even an upset without permanent damage may be unacceptable to the end-user. Handheld equipment that contains a transmitter also may require protection to guard against improper measurement and/or upset due to the affect of the radio frequency (RF) on the circuitry. Because the RF field strength varies
• Descargar
  Feature Set Comparison of bq27x00, bq27x10, bq27500, and bq27510 (Rev. A)
  PDF, 65 Kb, Revisión: A, Archivo publicado: dic 2, 2008
  Feature Set Comparison of bq27x00, bq27x10, bq27500 and bq27510
• Descargar
  Single Cell Impedance Track Printed-Circuit Board Layout
  PDF, 403 Kb, Archivo publicado: feb 22, 2008
  bq20z70/90 Printed-Circuit Board Layout Guide
• Descargar
  Single Cell Gas Gauge Circuit Design
  PDF, 154 Kb, Archivo publicado: feb 22, 2008
• Descargar
  MSP430 Microcontroller SW for Handheld Fuel Gauges and Battery Authentication (Rev. A)
  PDF, 350 Kb, Revisión: A, Archivo publicado: mayo 26, 2010
  MSP430, bq26100, bq26100EVM, bq26150, bq26150EVM, bq26500, bq27000, bq27000EVM, bq27200, b MSP430 Microcontroller Software for Handheld Fuel Gauge & Battery Authentication

Linea modelo

Clasificación del fabricante

• Semiconductors > Power Management > Battery Management Products > Battery Fuel Gauge