Datasheet Texas Instruments BQ26500PW — Ficha de datos

Fabricante	Texas Instruments
Serie	BQ26500
Numero de parte	BQ26500PW

Hojas de datos

Precios

Estado

Embalaje

Reemplazos

Plan ecológico

Kits de diseño y Módulos de evaluación

• Evaluation Modules & Boards: BQ26500EVM-001
  bq26500 Evaluation System
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar

Notas de aplicación

• Descargar
  Configuring the bq26500 for Gas Gauging Applications
  PDF, 132 Kb, Archivo publicado: sept 15, 2003
  This application note describes the ten EEPROM locations that can be programmed by the user to optimize the setup for the particular battery and host requirements.
• Descargar
  Determining the Values to Program the bq26500/bq26501 EEPROM
  PDF, 326 Kb, Archivo publicado: jun 17, 2004
  Customers can program ten EEPROM registers to optimize the ability of the bq26500/bq26501 to monitor the battery capacity of a given group or type of Li-ion pack cells. This document explains how to obtain the values to be programmed in EEPROM by using information known by the pack/system designers and manufacturers and data collected from packs. HP34401A multimeters and a test setup that includes
• Descargar
  Multicell Li-Ion and Li-Pol Battery Gas-Gauge Application Using bq26500
  PDF, 185 Kb, Archivo publicado: enero 29, 2004
  The bq26500 is the first complete battery fuel gauge for handheld devices such as PDAs and cellular handsets. Many of these applications use only one Li-Ion or Li-Polymer cell in the battery, producing a nominal 3.6 V. Although optimized for single-cell applications, the bq26500 works well in systems using multicell battery packs, particularly two series-cell batteries producing 7.2 V. This applic
• Descargar
  Choosing Between Battery Gas Gauges & Monitors to Track Charge Availabilility
  PDF, 184 Kb, Archivo publicado: sept 27, 2005
  Some customers are unfamiliar with battery monitors or gas gauges for their handheld portable applications. The intent of this application report is to provide information about TI product families that are excellent options when selecting a battery gas gauge solution.
• Descargar
  HDQ Compatibility Between OMAP and BQ Products
  PDF, 76 Kb, Archivo publicado: jun 17, 2004
  TI OMAP? and battery management products are found in today's fast-paced developing market of handheld products that include cellular phones with integrated camera and video recorder features, PDAs with wireless capabilities, and advanced handheld gaming systems. In many of these systems, both OMAP and battery management products coexist. OMAP platforms have an HDQ engine that is used to communica
• Descargar
  Complete battery-pack design for one- or two-cell portable applications
  PDF, 164 Kb, Archivo publicado: jul 17, 2006
• Descargar
  HDQ Communication Basics (Rev. A)
  PDF, 103 Kb, Revisión: A, Archivo publicado: sept 18, 2008
  This report compares the communication timing specifications for the different battery gas gauge and battery monitor products. It discusses some of the interface requirements necessary for robust HDQ communication, such as the need for a break prior to each communication, how to reliably read 16-bit dynamic values over the 8-bit bus, and the need for some noise filtering on the HDQ line. It also
• Descargar
  ESD and RF Mitigation in Handheld Battery Pack Electronics
  PDF, 68 Kb, Archivo publicado: marzo 6, 2008
  It is imperative to protect the electronics in a consumer-removable battery pack from ESD damage. Even an upset without permanent damage may be unacceptable to the end-user. Handheld equipment that contains a transmitter also may require protection to guard against improper measurement and/or upset due to the affect of the radio frequency (RF) on the circuitry. Because the RF field strength varies
• Descargar
  MSP430 Microcontroller SW for Handheld Fuel Gauges and Battery Authentication (Rev. A)
  PDF, 350 Kb, Revisión: A, Archivo publicado: mayo 26, 2010
  MSP430, bq26100, bq26100EVM, bq26150, bq26150EVM, bq26500, bq27000, bq27000EVM, bq27200, b MSP430 Microcontroller Software for Handheld Fuel Gauge & Battery Authentication

Linea modelo

Clasificación del fabricante

• Semiconductors > Power Management > Battery Management Products > Battery Fuel Gauge