Datasheet Texas Instruments BQ24105 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | BQ24105 |
Cargador de iones de litio síncrono autónomo de modo conmutado con 2A FET en QFN-20, 1 a 3 celdas
Hojas de datos
bq241xx Synchronous Switched-Mode, Li-Ion and Li-Polymer Charge-Management IC With Integrated Power FETs (bqSWITCHERв„ў) datasheet
PDF, 1.5 Mb, Revisión: P, Archivo publicado: nov 30, 2015
Extracto del documento
Precios
Estado
| BQ24105RHLR | BQ24105RHLRG4 | |
|---|---|---|
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí | Sí |
Embalaje
| BQ24105RHLR | BQ24105RHLRG4 | |
|---|---|---|
| N | 1 | 2 |
| Pin | 20 | 20 |
| Package Type | RHL | RHL |
| Industry STD Term | VQFN | VQFN |
| JEDEC Code | R-PQFP-N | R-PQFP-N |
| Package QTY | 3000 | 3000 |
| Carrier | LARGE T&R | LARGE T&R |
| Device Marking | CIF | CIF |
| Width (mm) | 3.5 | 3.5 |
| Length (mm) | 4.5 | 4.5 |
| Thickness (mm) | .9 | .9 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | 1 | 1 |
| Mechanical Data | Descargar | Descargar |
Paramétricos
| Parameters / Models | BQ24105RHLR | BQ24105RHLRG4 |
|---|---|---|
| Absolute Vin (safety rating)(Max)(, V | 20 | 20 |
| Battery Charge Voltage(Max), V | 15.5 | 15.5 |
| Battery Charge Voltage(Min), V | 2.1 | 2.1 |
| Cell Chemistry | Li-Ion/Li-Polymer | Li-Ion/Li-Polymer |
| Charge Current(Max), A | 2 | 2 |
| Control Interface | Standalone (RC-Settable) | Standalone (RC-Settable) |
| Control Topology | Switch-Mode Buck | Switch-Mode Buck |
| Number of Series Cells | 1,2,3 | 1,2,3 |
| Operating Vin(Max), V | 16 | 16 |
| Operating Vin(Min), V | 4.35 | 4.35 |
| Package Group | VQFN | VQFN |
| Package Size: mm2:W x L, PKG | 20VQFN: 16 mm2: 3.5 x 4.5(VQFN) | 20VQFN: 16 mm2: 3.5 x 4.5(VQFN) |
| Special Features | Integrated FET,Temp Monitoring (Thermistor Pin) | Integrated FET,Temp Monitoring (Thermistor Pin) |
| USB Feature | N/A | N/A |
Plan ecológico
| BQ24105RHLR | BQ24105RHLRG4 | |
|---|---|---|
| RoHS | Obediente | Obediente |
Notas de aplicación
- Using bq24105 as Lead-Acid ChargerPDF, 151 Kb, Archivo publicado: jun 8, 2007
This application report gives an example of using the bq24105 charge integrated circuit to provide a high-efficiency, switching-mode charging solution for a lead-acid battery. - Using the bq24105/25 to Charge LiFePO4 batteryPDF, 118 Kb, Archivo publicado: dic 17, 2007
This application report gives an example of using the bq24105/25 charge management device to provide a high-efficiency, switching-mode charging solution for the LiFePOв‚„battery. - Power Dissipation Analysis & Circuit Design for Sync Switching Battery ChargerPDF, 402 Kb, Archivo publicado: mayo 31, 2005
The bqSWITCHER(TM) (bq24100/03/05/08/13/15) is a highly integrated, switch-mode, Li-ion and Li-polymer battery charger IC. With two power MOSFETs, the gate drivers, and the controller fully integrated in the chip, the circuit design as well as the PCB layout has been appreciably simplified. However, it is still important to have a good understanding of the charger circuit design, layout principles - Implementations of Battery Charger and Power-Path Mgmt System Using bq241xxPDF, 752 Kb, Archivo publicado: jun 6, 2006
This application report presents four system topologies that can be used to fully implement a portable power management system solution using the bqSWITCHERв„ў. Test results and the advantages and issues of each topology are discussed. - Drive High Current LEDsPDF, 437 Kb, Archivo publicado: enero 25, 2007
This application report presents high-current LED driving requirements that use the TI integrated boost converter IC TPS6106x and integrated buck converter IC bqSWITCHERв„ў (bq2410x/11x/12x). Step-by-step design procedures, measurement results, and two dimming methods are provided and discussed.
Linea modelo
Serie: BQ24105 (2)
Clasificación del fabricante
- Semiconductors> Power Management> Battery Management Products> Battery Charger IC