Datasheet Texas Instruments BQ20Z80ADBT-V110G4 — Ficha de datos

Fabricante	Texas Instruments
Serie	BQ20Z80A-V110
Numero de parte	BQ20Z80ADBT-V110G4

Hojas de datos

Precios

Estado

Embalaje

Plan ecológico

Kits de diseño y Módulos de evaluación

• Evaluation Modules & Boards: BQTESTER
  Single Channel Tester
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar
• Evaluation Modules & Boards: BQMTESTER
  BQMTESTER Multi Channel Test and Program Board
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar

Notas de aplicación

• Descargar
  Cell-type Specific Settings for Cell Imbalance Permanent Failure Thresholds
  PDF, 100 Kb, Archivo publicado: sept 28, 2007
• Descargar
  2-Series-Cell Considerations for Advanced Fuel Gauges
  PDF, 154 Kb, Archivo publicado: mayo 9, 2008
• Descargar
  Evaluation 6: Using SHA-1 in bq20zxx Family of Gas Gauges
  PDF, 107 Kb, Archivo publicado: nov 19, 2005
  The bq20zxx Impedance Trackв„ў family of gas gauge ICs includes a highly sophisticated authentication algorithm, known as SHA-1, which requires little setup and development time and provides an effective, secure battery design.
• Descargar
  Production 2: Data Flash Programming/Calibrating the bq20z80 Gas Gauges (Rev. B) (Rev. B)
  PDF, 235 Kb, Revisión: B, Archivo publicado: enero 12, 2010
  This application report presents a strategy for high-speed, economical calibration and data flash programming of the bq20z80 advanced gas gauge chipset family. VB6 code examples are provided, along with step-by-step instructions for preparing a golden battery pack.
• Descargar
  Five to Eight-Series-Cell bq20z80 Fuel Gauge
  PDF, 997 Kb, Archivo publicado: sept 10, 2007
  Battery fuel gauging applications requiring five- to eight-series cells may not have an obvious solution. While fully functional solutions are anticipated in the future, currently available chipsets tend to address end-products where four-series cells are the maximum. This report presents an inexpensive solution, using the bq20z80 fuel gauge.
• Descargar
  Impedance Track(TM) Gas Gauge for Novices
  PDF, 482 Kb, Archivo publicado: enero 30, 2006
  This application report introduces the bq20z80 Impedance Trackв„ў and bq29312A chipset gas gauge solution.
• Descargar
  Operating Fuel Gauge bq20z7x/8x/9x and SMBus-Like bq24745/47/65 Chargers
  PDF, 132 Kb, Archivo publicado: oct 6, 2009
  The smart charger bq24747/765 is a high-efficiency, synchronous battery charger with an integrated input current comparator. This charger provides low component count for space constrained, multichemistry battery charging applications. SMBus input current, charge current, and input current digital-to-analog converters allow for very high regulation accuracies that the system power management micr
• Descargar
  Cell Balancing Using the bq20zxx (Rev. C)
  PDF, 208 Kb, Revisión: C, Archivo publicado: enero 12, 2011
  This application report discusses three types of cell imbalances that are observed in a battery pack withserially connected cells.
• Descargar
  Design 3: Configuring the bq20z80 Data Flash
  PDF, 1.2 Mb, Archivo publicado: nov 10, 2005
  This application report presents the data flash constants for configuring the bq20z80 Smart Battery System (SBS)-compliant gas gauge device. A brief explanation of each option for the various features is included.
• Descargar
  Configuring the bq20z80 Data Flash
  PDF, 2.8 Mb, Archivo publicado: jun 15, 2006
  How to Configure the bq20z80
• Descargar
  bq20z80 Application Book
  PDF, 7.3 Mb, Archivo publicado: jun 15, 2006
• Descargar
  Data Flash Programming Using the EV Software
  PDF, 40 Kb, Archivo publicado: jun 15, 2006
• Descargar
  bq20Z80-v101 to bq20z80-V102 Change List
  PDF, 48 Kb, Archivo publicado: nov 17, 2005
  This document describes the design considerations required to change a bq20z80-V101 design to a bq20z80-V102. Find the latest ordering information and data sheet on the TI Web site.
• Descargar
  bq20z80 to bq20z80-V101 Change List
  PDF, 57 Kb, Archivo publicado: agosto 17, 2005
• Descargar
  Updating Firmware With the bq20zxx and EVM (Rev. B)
  PDF, 54 Kb, Revisión: B, Archivo publicado: nov 7, 2006
  This application report presents the steps necessary to update the bq20z80 firmware and the EVM.
• Descargar
  Exploring the bq20z80 Impedance Track Evaluation Kit (Rev. A)
  PDF, 1.1 Mb, Revisión: A, Archivo publicado: jun 14, 2006
• Descargar
  Wide-Vin Battery-Charger Using SMBus MSP430 MCUs and bq Fuel Gauges (Rev. A)
  PDF, 1.0 Mb, Revisión: A, Archivo publicado: jul 25, 2011
  This application report describes a smart-battery charger reference design with a wide-input-voltage range. The reference design implements the System Management Bus (SMBus) protocol for communication between the MSP430 microcontroller and a SMBus-compatible battery fuel gauge. The MSP430 device interrogates the fuel gauge for voltage, current, and other parameters via SMBus. It then adjusts the p
• Descargar
  bq20z80 EVM Data Flash Settings for Num of Serial Cells/Pack Cap (Rev. B)
  PDF, 1.1 Mb, Revisión: B, Archivo publicado: nov 6, 2006
  This application report describes the configuration changes in the data flash constants in the Texas Instruments bq20z80 Gas Gauge Evaluation Software for a variety of battery-pack configurations.
• Descargar
  Pack Assembly and the bq20zxx (Rev. B)
  PDF, 35 Kb, Revisión: B, Archivo publicado: nov 7, 2006
  This application report describes a recommended assembly sequence for the bq20z80-based battery pack. This procedure results in the most time-efficient setup of the battery pack. Included are steps for connecting a 4-series cell battery to the bq20z80EVM-001.
• Descargar
  Thermistor Coefficient Calculator for TI Advanced Fuel Gauges
  PDF, 58 Kb, Archivo publicado: oct 4, 2006
• Descargar
  Evaluation 7: Preparing Optimized Data Flash Constants (Rev. B)
  PDF, 29 Kb, Revisión: B, Archivo publicado: dic 4, 2006
  Impedance Track в„ў technology allows bq20z80 fuel gauge ICs to automatically acquire and maintain parameters for battery modeling needed for continuous fuel-gauge accuracy, regardless of battery model or manufacturer. This application report discusses how to prepare optimized default flash constants for specific battery types.
• Descargar
  Design 2: Avoiding ESD and EMI Problems in bq20zxx Battery Pack Electronics
  PDF, 113 Kb, Archivo publicado: nov 11, 2005
  In an increasingly wireless world, electrostatic discharge and electromagnetic interference are both potential issues for portable battery packs. This application report discusses the causes of ESD and EMI issues in battery pack designs and offers solutions for mitigation.
• Descargar
  Q1 2010 Issue Analog Applications Journal
  PDF, 2.6 Mb, Archivo publicado: enero 29, 2010
• Descargar
  Support of Multiple Chemistries
  PDF, 86 Kb, Archivo publicado: jun 15, 2006
• Descargar
  bq20z80-V101 Temporary SBS.FullChargeCapacity() Invalid Data
  PDF, 33 Kb, Archivo publicado: sept 10, 2005
  Temporary invalid data in the SBS.FullChargeCapacity() register of the bq20z80-V1.01 could occur under rare conditions. This application report describes those conditions and the solutions.
• Descargar
  Design 4: Support of Multiple Li-Ion Chemistries w/Impedance Track(TM) Gas Gauge (Rev. R)
  PDF, 87 Kb, Revisión: R, Archivo publicado: oct 15, 2009
• Descargar
  Evaluation 1: Feature Set Comparison Between bq2084 and bq20z80
  PDF, 147 Kb, Archivo publicado: nov 29, 2005
  The bq20z80 differs from the bq2084 in several areas, although all bq2084 features are available in the bq20z80. Both devices support SBS1.1 with SMBus communications, but the bq20z80 has many extended SBS commands to enable additional features. The array of bq2084 safety features is expanded in the bq20z80, with a wider range of configuration options. The bq20z80 offers greater flexibility in use
• Descargar
  Battery Pack Production Flow With bq20zXX
  PDF, 62 Kb, Archivo publicado: agosto 2, 2006
  This application report presents a battery pack production flow diagram for bq20zXX devices and discusses each step in detail.
• Descargar
  Production Flow With bq20z80 Gas Gauges
  PDF, 41 Kb, Archivo publicado: jun 15, 2006
• Descargar
  Quick-Start Guide for bq20zxx Family Gas Gauges (Rev. A)
  PDF, 4.4 Mb, Revisión: A, Archivo publicado: sept 4, 2007
  The intent of this application report is to give the user an overview of the design process, how to use the evaluation module and software, and to provide helpful troubleshooting techniques.This document begins with setting up the evaluation module and working with bq Evaluation Software. Several tips for troubleshooting the software connection are included, as well as navigation and what to l
• Descargar
  Evaluation 3: Theory/Implementation Impedance Track Battery Fuel-Gauging Algo (Rev. B)
  PDF, 101 Kb, Revisión: B, Archivo publicado: dic 20, 2006
• Descargar
  bq20z80 Printed Circuit Board Layout Guide
  PDF, 198 Kb, Archivo publicado: jun 16, 2006
• Descargar
  Fast Cell Balancing Using External MOSFET (Rev. A)
  PDF, 153 Kb, Revisión: A, Archivo publicado: enero 26, 2009
  The need for cell balancing comes from the fact that cell-to-cell differences in self-discharge, capacity, and impedance can lead to different charge states among the cells. However, the charger terminates the charge based on the summed voltage only, which may leave some cells undercharged and others overcharged. To remedy this imbalance and to achieve the goal of having all cells reaching 100% st

Linea modelo

Clasificación del fabricante

• Semiconductors > Power Management > Battery Management Products > Battery Fuel Gauge

Otros nombres:

BQ20Z80ADBTV110G4, BQ20Z80ADBT V110G4