Datasheet Texas Instruments ADC08500 — Ficha de datos

ADC08500
www.ti.com SNAS373E – MAY 2007 – REVISED APRIL 2013 ADC08500 High Performance, Low Power 8-Bit, 500 MSPS A/D Converter
Check for Samples: ADC08500 FEATURES DESCRIPTION The ADC08500 is a low power, high performance
CMOS analog-to-digital converter that digitizes
signals to 8 bits resolution at sampling rates up to
500 MSPS. Consuming a typical 0.8 Watts at 500
MSPS from a single 1.9 Volt supply, this device is
ensured to have no missing codes over the full
operating temperature range. The unique folding and
interpolating architecture, the fully differential
comparator design, the innovative design of the
internal sample-and-hold amplifier and the selfcalibration scheme enable a very flat response of all
dynamic parameters beyond Nyquist, producing a
high 7.5 ENOB with a 250 MHz input signal and a
500 MHz sample rate while providing a 10-18 B.E.R.
Output formatting is offset binary and the LVDS
digital outputs are compatible with IEEE 1596.3-1996,
with the exception of an adjustable common mode
voltage between 0.8V and 1.2V. 1 2 Internal Sample-and-Hold
Single +1.9V В±0.1V Operation
Choice of SDR or DDR Output Clocking
Multiple ADC Synchronization Capability
Ensured No Missing Codes …