Datasheet Texas Instruments UCC28514DWR — Ficha de datos

FabricanteTexas Instruments
SerieUCC28514
Numero de parteUCC28514DWR
Datasheet Texas Instruments UCC28514DWR

Controladores combinados PFC / PWM avanzados 20-SOIC -40 a 105

Hojas de datos

Advanced PFC/PWM Combination Controllers datasheet
PDF, 1.5 Mb, Revisión: C, Archivo publicado: sept 14, 2005
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin20
Package TypeDW
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device MarkingUCC28514DW
Width (mm)7.5
Length (mm)12.8
Thickness (mm)2.35
Pitch (mm)1.27
Max Height (mm)2.65
Mechanical DataDescargar

Paramétricos

Control MethodCCM
Device TypePFC+PWM
Operating Supply Current4 mA
Operating Supply(Max)18 V
Operating Temperature Range-40 to 105 C
Package GroupSOIC
Package Size: mm2:W x L20SOIC: 132 mm2: 10.3 x 12.8(SOIC) PKG
Peak Output Sink Current Gate Drive3 A
Peak Output Source Current Gate Drive-2 A
Practical Operating Frequency(Max)0.5 MHz
RatingCatalog
Special FeaturesAverage Current Mode,Enable,OVP
Startup Current0.1 mA
UVLO Thresholds On/Off16/10 V

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: UCC28521EVM
    UCC28521 Evaluation Module
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  • Evaluation Modules & Boards: UCC28514EVM
    UCC28514 Evaluation Module
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • UCC28517 100-W PFC power converter with 12-V, 8-W bias supply, Part 2
    PDF, 224 Kb, Archivo publicado: feb 28, 2005
    To conclude the review of the UCC28517 PFC supply, this article covers the design of the second 12-V, 8-W power stage to be used as an auxiliary bias supply.
  • UCC28517 100-W PFC power converter with 12-V, 8-W bias supply, Part 1
    PDF, 202 Kb, Archivo publicado: feb 28, 2005
    Power factor corrected (PFC) preregulators are generally used in ac/dc converters operating above 75 W or to meet line harmonic requirements. This article reviews the design of a 100-W ac/dc power stage with PFC.
  • Bootstrap Circuit for Green Mode Applications
    PDF, 111 Kb, Archivo publicado: enero 27, 2006
  • A New Synchronization Circuit for Power Converters (Rev. A)
    PDF, 209 Kb, Revisión: A, Archivo publicado: abr 21, 2010
    The synchronization of multiple PWM and PFC controllers is desirable for many reasons. The most common reason is that it keeps all the noise at one particular frequency and makes it easier to filter. The circuit described changes the slope of the ramp to lock the converter’s switching frequency to an applied signal by a phase locked loop turning it into a voltage controlled oscillator. Furthermore
  • Startup Current transient of the Leading Edge Triggered PFC Controllers
    PDF, 43 Kb, Archivo publicado: jun 30, 2004
  • Avoiding Audible Noise at Light Loads When Using Leading Edge Triggered PFC Con (Rev. C)
    PDF, 57 Kb, Revisión: C, Archivo publicado: abr 13, 2011
    This application note applies to the TI average current mode, leading edge modulation PFC controllers. See Applicable Device Table for part numbers.

Linea modelo

Serie: UCC28514 (3)

Clasificación del fabricante

  • Semiconductors > Power Management > Offline and Isolated DC/DC Controllers and Converters > Power Factor Correction