Datasheet Texas Instruments THS3111DGNR — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | THS3111 |
| Numero de parte | THS3111DGNR |
Amplificador de retroalimentación de corriente de alto voltaje simple y bajo ruido 8-MSOP-PowerPAD -40 a 85
Hojas de datos
Low-Noise, High-Voltage, Current-Feedback Op Amplifiers datasheet
PDF, 1.3 Mb, Revisión: E, Archivo publicado: oct 12, 2009
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Vista previa (El dispositivo ha sido anunciado pero no está en producción. Las muestras pueden o no estar disponibles) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 8 |
| Package Type | DGN |
| Industry STD Term | HVSSOP |
| JEDEC Code | S-PDSO-G |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | 1.02 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.1 |
| Mechanical Data | Descargar |
Paramétricos
| 2nd Harmonic(dBc) | 52 |
| 3rd Harmonic(dBc) | 48 |
| @ MHz | 10 |
| Acl, min spec gain(V/V) | 1 |
| Additional Features | N/A |
| Approx. Price (US$) | 2.72 | 100u |
| Architecture | Bipolar Current FB |
| BW @ Acl(MHz) | 100 |
| CMRR(Min)(dB) | 62 |
| CMRR(Typ)(dB) | 68 |
| GBW(Typ)(MHz) | 100 |
| Input Bias Current(Max)(pA) | 4000000 |
| Iq per channel(Max)(mA) | 6.5 |
| Iq per channel(Typ)(mA) | 4.8 |
| Number of Channels(#) | 1 |
| Offset Drift(Typ)(uV/C) | 10 |
| Operating Temperature Range(C) | -40 to 85 0 to 70 |
| Output Current(Typ)(mA) | 260 |
| Package Group | MSOP-PowerPAD |
| Package Size: mm2:W x L (PKG) | 8MSOP-PowerPAD: 15 mm2: 4.9 x 3(MSOP-PowerPAD) |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ)(V/us) | 900 |
| Total Supply Voltage(Max)(+5V=5, +/-5V=10) | 30 |
| Total Supply Voltage(Min)(+5V=5, +/-5V=10) | 10 |
| Vn at Flatband(Typ)(nV/rtHz) | 3 |
| Vos (Offset Voltage @ 25C)(Max)(mV) | 10 |
Plan ecológico
| RoHS | Desobediente |
| Pb gratis | No |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: THS3111EVM
THS3111 Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: THS3121EVM
THS3121 Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: THS3120EVM
THS3120 Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: THS3110EVM
THS3110 Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Active filters using current-feedback amplifiersPDF, 227 Kb, Archivo publicado: feb 25, 2005
- Expanding the usability of current-feedback amplifiersPDF, 215 Kb, Archivo publicado: feb 28, 2005
- Wideband Complementary Current Output DAC Single-Ended InterfacePDF, 597 Kb, Archivo publicado: jun 21, 2005
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps through the exact design equations required to achieve gain matching from each output as well as a matched input impedance to each of the DA - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Linea modelo
Serie: THS3111 (10)
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)