Datasheet Texas Instruments LM3530UME-40/NOPB — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | LM3530 |
| Numero de parte | LM3530UME-40/NOPB |
Controlador LED blanco de alta eficiencia con capacidad programable de detección de luz ambiental 12-DSBGA -30 a 85
Hojas de datos
LM3530 High-Efficiency White-LED Driver with Programmable Ambient Light Sensing Capability and I2C-Compatible Interface datasheet
PDF, 7.5 Mb, Revisión: L, Archivo publicado: dic 23, 2014
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 12 |
| Package Type | YFZ |
| Industry STD Term | DSBGA |
| JEDEC Code | R-XBGA-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | 40 |
| Thickness (mm) | .4 |
| Pitch (mm) | .4 |
| Max Height (mm) | .47 |
| Mechanical Data | Descargar |
Paramétricos
| Number of Channels | 1 |
| Duty Cycle(Max) | 94 % |
| LED | 11 |
| LED Current Per Channel | 30 mA |
| Operating Temperature Range | -30 to 85 C |
| Package Group | DSBGA |
| Package Size: mm2:W x L | See datasheet (DSBGA) PKG |
| Peak Efficiency | 88 % |
| Rating | Catalog |
| Shutdown Current(Typ) | 1 uA |
| Special Features | I2C Control |
| Switching Frequency(Max) | 500 kHz |
| Topology | Boost |
| Type | Inductive |
| Vin(Max) | 5.5 V |
| Vin(Min) | 2.7 V |
| Vout(Max) | 40 V |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: LM3530EV-KIT
Evaluation Board for the LM3530
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Inductor Selection in Boost Converters for LCD Backlight ApplicationsPDF, 764 Kb, Archivo publicado: oct 24, 2016
White LED drivers for LCD back-light applications are often designed for battery-powered devices. This makes circuit size and efficiency crucial. Because of this, selecting the optimal inductor is one of the mostimportant aspects of the design. This application note discusses the important parameters of the inductorand how to select the right inductor for the application. - Schottky Diode Selection in Asynchronous Boost ConvertersPDF, 491 Kb, Archivo publicado: sept 6, 2016
Asynchronous boost converters require a Schottky diode as the rectifying element due to the diode's lowforward voltage and fast turn-on time. Because of these characteristics asynchronous boost converterscan have as good as, or better efficiency, than synchronous boost converters. This is especially true whenthe boost conversion ratios (VOUT/VIN) are high, and the Schottky diode conduction t - Analog PWM Dimming in White-LED DriversPDF, 539 Kb, Archivo publicado: dic 21, 2016
Pulse-width modulation (PWM) is a common type of dimming used to adjust the current in white-LEDdriver devices. PWM dimming takes a rectangle waveform with variable positive duty cycle (D) and adjuststhe LED current proportionally. For many smaller format white LED drivers (7-inch screen size or smaller),the PWM signal is converted to a DC control voltage and made to drive the LED current in
Linea modelo
Serie: LM3530 (8)
Clasificación del fabricante
- Semiconductors > Power Management > LED Driver > Backlight LED Driver
Otros nombres:
LM3530UME40/NOPB, LM3530UME 40/NOPB