Datasheet Texas Instruments CD74ACT258M96 — Ficha de datos
Fabricante | Texas Instruments |
Serie | CD74ACT258 |
Numero de parte | CD74ACT258M96 |
Multiplexores cuádruples de inversión de 2 entradas con salidas de 3 estados 16-SOIC -55 a 125
Hojas de datos
Quad 2-Input Multiplexer with Three-State Outputs datasheet
PDF, 1.1 Mb, Revisión: A, Archivo publicado: mayo 17, 2000
Extracto del documento
Precios
Estado
Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
Disponibilidad de muestra del fabricante | No |
Embalaje
Pin | 16 |
Package Type | D |
Industry STD Term | SOIC |
JEDEC Code | R-PDSO-G |
Package QTY | 2500 |
Carrier | LARGE T&R |
Device Marking | ACT258M |
Width (mm) | 3.91 |
Length (mm) | 9.9 |
Thickness (mm) | 1.58 |
Pitch (mm) | 1.27 |
Max Height (mm) | 1.75 |
Mechanical Data | Descargar |
Paramétricos
Bandwidth | 100 MHz |
Bits | 2 |
Number of Channels | 4 |
Configuration | 2:1 |
Digital input leakage(Max) | 5 uA |
ESD Charged Device Model | 0.75 kV |
ESD HBM | 2 kV |
F @ Nom Voltage(Max) | 90 Mhz |
Function | Encoder/Multiplexer |
ICC @ Nom Voltage(Max) | 0.08 mA |
Operating Temperature Range | -55 to 125 C |
Output Drive (IOL/IOH)(Max) | 24/-24 mA |
Package Group | SOIC |
Package Size: mm2:W x L | 16SOIC: 59 mm2: 6 x 9.9(SOIC) PKG |
Rating | Catalog |
Schmitt Trigger | No |
Technology Family | ACT |
Type | 3-State Output |
VCC(Max) | 5.5 V |
VCC(Min) | 4.5 V |
Voltage(Nom) | 5 V |
tpd @ Nom Voltage(Max) | 9.7 ns |
Plan ecológico
RoHS | Obediente |
Notas de aplicación
- Selecting the Right Level Translation Solution (Rev. A)PDF, 313 Kb, Revisión: A, Archivo publicado: jun 22, 2004
Supply voltages continue to migrate to lower nodes to support today's low-power high-performance applications. While some devices are capable of running at lower supply nodes others might not have this capability. To haveswitching compatibility between these devices the output of each driver must be compliant with the input of the receiver that it is driving. There are several level-translati - Using High Speed CMOS and Advanced CMOS in Systems With Multiple VccPDF, 43 Kb, Archivo publicado: abr 1, 1996
Though low power consumption is a feature of CMOS devices sometimes this feature does not meet a designer?s system power supply constraints. Therefore a partial system power down or multiple Vcc supplies are used to meet the needs of the system. This document shows electrostatic discharge protection circuits. It also provides circuit and bus driver examples of partial system power down and curren
Linea modelo
Serie: CD74ACT258 (2)
- CD74ACT258M CD74ACT258M96
Clasificación del fabricante
- Semiconductors > Switches and Multiplexers > Buffered Encoders and Decoders