Datasheet Texas Instruments LM20133MH/NOPB — Ficha de datos

FabricanteTexas Instruments
SerieLM20133
Numero de parteLM20133MH/NOPB
Datasheet Texas Instruments LM20133MH/NOPB

2.95-5.5V, 3A, Regulador sincronizado de corriente de modo actual con sincronización de entrada y grado automotriz opcional 16-HTSSOP -40 a 125

Hojas de datos

LM20133/LM20133Q 3A, Synchronous Buck Regulator with Input Synchronization datasheet
PDF, 1.5 Mb, Revisión: F, Archivo publicado: marzo 27, 2013
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin1616
Package TypePWPPWP
Industry STD TermHTSSOPHTSSOP
JEDEC CodeR-PDSO-GR-PDSO-G
Package QTY9292
CarrierTUBETUBE
Device MarkingMH20133
Width (mm)4.44.4
Length (mm)55
Thickness (mm)11
Pitch (mm).65.65
Max Height (mm)1.21.2
Mechanical DataDescargarDescargar

Paramétricos

Control ModeCurrent Mode
Duty Cycle(Max)85 %
Iout(Max)3 A
Iq(Typ)3.5 mA
Operating Temperature Range-40 to 125 C
Package GroupHTSSOP
RatingCatalog
Regulated Outputs1
Special FeaturesEnable,Frequency Synchronization,Power Good,Pre-Bias Start-Up,Synchronous Rectification,Tracking
Switching Frequency(Max)1500 kHz
Switching Frequency(Min)460 kHz
TypeConverter
Vin(Max)5.5 V
Vin(Min)2.95 V
Vout(Max)5 V
Vout(Min)0.8 V

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: LM20133EVAL
    3A, PowerWiseВ® Synchronous Buck Regulator with Input Synchronization Evaluation Module
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • AN-2077 LM20k POL Module (Rev. A)
    PDF, 1.3 Mb, Revisión: A, Archivo publicado: mayo 3, 2013
    The LM20k is a full-featured synchronous buck switching regulator capable of driving up to 6A of loadcurrent and converting an input voltage between 2.95V and 5.5V down to an output voltage as low as0.8V. Fault protection features include cycle-by-cycle current limit, output power good, and output overvoltageprotection. The dual function soft-start/tracking pin can be used to control the sta
  • AN-1751 4A LM20k Reference Designs (Rev. A)
    PDF, 215 Kb, Revisión: A, Archivo publicado: mayo 3, 2013
    This application note discusses the design options using the high performance 4A synchronous buckconverters, LM20124, LM20134, and LM20144.
  • AN-1747 3A LM20k Reference Designs (Rev. A)
    PDF, 242 Kb, Revisión: A, Archivo publicado: mayo 3, 2013
    The LM20123, LM20133, and LM20143 are a full-featured family of high performance 3A synchronousbuck converters. These devices are tailored to operate over an input voltage range of 2.95 V to 5.5 V andeach can be optimized to meet many different performance requirements. The LM20123 operates at afixed frequency and only requires 11 components to generate a solution. The LM20143 is similar to
  • Powering FPGAs Using LM201xx PowerWise Synchronous Buck Regulators (Rev. A)
    PDF, 45 Kb, Revisión: A, Archivo publicado: mayo 3, 2013
    The LM201xx family offers a full range of features and options enabling a FPGA designer to fullycustomize their power solution to meet the system application needs.

Linea modelo

Serie: LM20133 (3)

Clasificación del fabricante

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)