Datasheet Texas Instruments TPS62352DRCR — Ficha de datos

FabricanteTexas Instruments
SerieTPS62352
Numero de parteTPS62352DRCR
Datasheet Texas Instruments TPS62352DRCR

1A, 3MHz Buck Converter con I2C para escalado de voltaje dinámico 10-VSON -40 a 85

Hojas de datos

800-mA 3-MHz Synchronous Step-Down Converter With I2C(TM) Compatible Interface datasheet
PDF, 1.6 Mb, Revisión: E, Archivo publicado: abr 15, 2008
Extracto del documento

Precios

Estado

Estado del ciclo de vidaVista previa (El dispositivo ha sido anunciado pero no está en producción. Las muestras pueden o no estar disponibles)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin10
Package TypeDRC
Industry STD TermVSON
JEDEC CodeS-PDSO-N
Width (mm)3
Length (mm)3
Thickness (mm).9
Pitch (mm).5
Max Height (mm)1
Mechanical DataDescargar

Paramétricos

Approx. Price (US$)0.69 | 1ku
Control ModeVoltage Mode
Duty Cycle(Max)(%)80
Iout(Max)(A)0.8
Iq(Typ)(mA)0.028
Operating Temperature Range(C)-40 to 85
Package GroupVSON
RatingCatalog
Regulated Outputs(#)1
Special FeaturesDynamic Voltage Scaling
Enable
Frequency Synchronization
Light Load Efficiency
Output Discharge
Synchronous Rectification
Switching Frequency(Max)(kHz)3350
Switching Frequency(Min)(kHz)2650
TypeConverter
Vin(Max)(V)5.5
Vin(Min)(V)2.7
Vout(Max)(V)1.4375
Vout(Min)(V)0.75

Plan ecológico

RoHSDesobediente
Pb gratisNo

Notas de aplicación

  • Using The TPS6235x Without The I2C Interface
    PDF, 69 Kb, Archivo publicado: mayo 17, 2007
    The TPS6235x series of DC/DC converters have an I2C-compatible interface that facilitates changing the output voltage for dynamic voltage-scaling applications. However, it is possible to use the TPS6235x series of converters, without the I2C interface, as a standalone DC/DC converter that can be dynamically switched between two fixed voltages. This technique does not work for the TPS62351.
  • Powering OMAP3 With TPS6235x: Design-In Guide
    PDF, 296 Kb, Archivo publicado: dic 3, 2008
    The OMAP35xx Applications Processors have a diverse set of power management features which potentially enable lower cost power solutions based on your application. This design-in guide describes a power solution based on the TPS6235x device. This guide can be used to evaluate this solution for your design or help you make decisions when designing in this solution.
  • Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)
    PDF, 1.1 Mb, Revisión: A, Archivo publicado: mayo 11, 2015
  • Five steps to a great PCB layout for a step-down converter
    PDF, 162 Kb, Archivo publicado: enero 29, 2015
  • Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)
    PDF, 755 Kb, Revisión: A, Archivo publicado: enero 13, 2012
  • Testing tips for applying external power to supply outputs without an input volt
    PDF, 110 Kb, Archivo publicado: oct 24, 2016
  • Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
    PDF, 387 Kb, Revisión: B, Archivo publicado: jun 15, 2017
  • Basic Calculation of a Buck Converter's Power Stage (Rev. B)
    PDF, 202 Kb, Revisión: B, Archivo publicado: agosto 17, 2015
  • QFN and SON PCB Attachment (Rev. B)
    PDF, 821 Kb, Revisión: B, Archivo publicado: agosto 24, 2018
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, Archivo publicado: jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revisión: A, Archivo publicado: dic 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Linea modelo

Serie: TPS62352 (3)

Clasificación del fabricante

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)