Datasheet Texas Instruments BQ2004SNTR — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | BQ2004 |
| Numero de parte | BQ2004SNTR |
Cargador de batería de modo conmutado NiCd / NiMH con dV negativo, detección de voltaje pico, terminación dT / dt 16-SOIC -20 a 70
Hojas de datos
Fast-Charge IC datasheet
PDF, 612 Kb, Revisión: B, Archivo publicado: abr 19, 2005
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 16 | 16 | 16 |
| Package Type | D | D | D |
| Industry STD Term | SOIC | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 2500 | 2500 | 2500 |
| Carrier | LARGE T&R | LARGE T&R | LARGE T&R |
| Device Marking | A4 | -A4 | 2004 |
| Width (mm) | 3.91 | 3.91 | 3.91 |
| Length (mm) | 9.9 | 9.9 | 9.9 |
| Thickness (mm) | 1.58 | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 | 1.75 |
| Mechanical Data | Descargar | Descargar | Descargar |
Paramétricos
| Absolute Vin (safety rating)(Max)( | 7 V |
| Battery Charge Voltage(Max) | 20 V |
| Cell Chemistry | NiCd,NiMH |
| Charge Current(Max) | 2 A |
| Control Interface | Standalone (RC-Settable) |
| Control Topology | Switch-Mode Buck |
| Number of Series Cells | 1,2,3,4 |
| Operating Vin(Max) | 5.5 V |
| Operating Vin(Min) | 4.5 V |
| Package Group | SOIC |
| Package Size: mm2:W x L | 16SOIC: 59 mm2: 6 x 9.9(SOIC) PKG |
| Special Features | Temp Monitoring (Thermistor Pin) |
| USB Feature | N/A |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: DV2004S1
BQ2004 Evaluation Module for NiCd/NiMH, switchmode, up to 3A
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: DV2004L1
BQ2004 Evaluation Module for NiCd/NiMH, linear
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- High-Side Current Sensing with Benchmarq's Fast-Charge Control ICsPDF, 31 Kb, Archivo publicado: sept 5, 1999
A low-side, current-sensing resistor in a fast-charge control circuit generates a small voltage drop between the low side of the battery pack and ground. This drop is not a problem in most cases; however, some applications, particularly mobile communications circuits, are intolerant of any potential difference between the low side of the battery pack and ground. Using a few additional components i - Using NiMH and Li-Ion Batteries in Portable ApplicationsPDF, 177 Kb, Archivo publicado: sept 5, 1999
- Battery Charger Termination Issues With System Load Applied Across Battery (Rev. A)PDF, 151 Kb, Revisión: A, Archivo publicado: oct 2, 2006
Battery Charger Termination Issues With System Load Applied Across Battery While Charging
Linea modelo
Serie: BQ2004 (6)
- BQ2004PN BQ2004PNG4 BQ2004SN BQ2004SNG4 BQ2004SNTR BQ2004SNTRG4
Clasificación del fabricante
- Semiconductors > Power Management > Battery Management Products > Battery Charger IC