Datasheet Texas Instruments THS3095D — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | THS3095 |
| Numero de parte | THS3095D |
Amplificador operacional de alto voltaje, baja distorsión y retroalimentación de corriente con apagado 8-SOIC -40 a 85
Hojas de datos
THS309x High-voltage, Low-distortion, Current-feedback Operational Amplifiers datasheet
PDF, 1.5 Mb, Revisión: H, Archivo publicado: dic 31, 2015
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 75 |
| Carrier | TUBE |
| Device Marking | 3095 |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Descargar |
Paramétricos
| 2nd Harmonic | 66 dBc |
| 3rd Harmonic | 74 dBc |
| @ MHz | 10 |
| Acl, min spec gain | 1 V/V |
| Additional Features | Shutdown |
| Architecture | Bipolar,Current FB |
| BW @ Acl | 235 MHz |
| CMRR(Min) | 62 dB |
| CMRR(Typ) | 69 dB |
| GBW(Typ) | 235 MHz |
| Input Bias Current(Max) | 15000000 pA |
| Iq per channel(Max) | 10.5 mA |
| Iq per channel(Typ) | 9.5 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 10 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 250 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 7300 V/us |
| Total Supply Voltage(Max) | 30 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 10 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 2 nV/rtHz |
| Vn at Flatband(Typ) | 2 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 3 mV |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: THS3091EVM
THS3091 Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: THS3095EVM
THS3095 Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Design of Differential Filters for High-Speed Signal Chains (Rev. B)PDF, 166 Kb, Revisión: B, Archivo publicado: abr 30, 2010
Differential filters have many desirable attributes. The task of designing differential filters can seem daunting at first. Single-ended filters designed in any filter design package can be converted to a differential implementation. This application report explores simple conversion techniques for low-pass, high-pass, and band-pass LC filters. - Interfacing op amps to high-speed DACs, Part 1: Current-sinking DACsPDF, 319 Kb, Archivo publicado: jul 14, 2009
- Interfacing op amps to high-speed DACs, Part 2: Current-sourcing DACsPDF, 617 Kb, Archivo publicado: oct 4, 2009
- Design for a Wideband Differential Transimpedance DAC Output (Rev. A)PDF, 438 Kb, Revisión: A, Archivo publicado: oct 17, 2016
High-speed digital-to-analog converters commonly offer a complementary current output signal. Most output interface implementations use either a resistive load and/or a transformer to convert this current source signal to a voltage. Where a dc-coupled interface is required, a carefully designed differential transimpedance stage can offer an attractive alternative. Design considerations and options - Q3 2009 Issue Analog Applications JournalPDF, 2.1 Mb, Archivo publicado: jul 14, 2009
- Voltage Feedback vs. Current Feedback Op AmpsPDF, 93 Kb, Archivo publicado: nov 30, 1998
This application report contrasts and compares the characteristics and capabilities of voltage and current feedback operational amplifiers. The report also points out the many similarities between the two versions. - Stabilizing Current-Feedback Op Amps While Optimizing Circuit PerformancePDF, 280 Kb, Archivo publicado: abr 28, 2004
Optimizing a circuit design with a current-feedback (CFB) op amp is a relatively straightforward task, once one understands how CFB op amps achieve stability. This application note explains a 2nd-order CFB model so that any designer can better understand the flexibility of the CFB op amp. This report also discusses stability analysis, the effects of parasitic components due to PCBs, optimization - Q4 2009 Issue Analog Applications JournalPDF, 1.5 Mb, Archivo publicado: oct 4, 2009
- Designing for low distortion with high-speed op ampsPDF, 277 Kb, Archivo publicado: marzo 2, 2005
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Linea modelo
Serie: THS3095 (5)
- THS3095D THS3095DDA THS3095DDAG4 THS3095DDAR THS3095DG4
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)