Datasheet Texas Instruments LM1117DTX-ADJ/NOPB — Ficha de datos

Fabricante	Texas Instruments
Serie	LM1117
Numero de parte	LM1117DTX-ADJ/NOPB

Regulador lineal de bajo consumo de energía de 800 mA con límite de corriente interna 3-TO-252 0 a 125

Hojas de datos

Vista previa y descarga

PDF, 2.8 Mb, Revisión: N, Archivo publicado: dic 31, 2015, Páginas: 36
800-mA Low-Dropout Linear Regulator

Extracto del documento

Precios

Estado

Estado del ciclo de vida	Activo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante	Sí

Embalaje

Pin	3	3
Package Type	NDP	NDP
Industry STD Term	TO-252	TO-252
JEDEC Code	R-MSFM-L	R-MSFM-L
Package QTY	2500	2500
Carrier	LARGE T&R	LARGE T&R
Device Marking	DT-ADJ	LM1117
Width (mm)	6.1	6.1
Length (mm)	6.58	6.58
Thickness (mm)	2.3	2.3
Pitch (mm)	4.57	4.57
Max Height (mm)	2.55	2.55
Mechanical Data	Descargar	Descargar

Paramétricos

Accuracy	3 %
Fixed Output Options	1.8,2.5,3.3,5 V
Iout(Max)	0.8 A
Iq(Typ)	5 mA
Noise	38 uVrms
Operating Temperature Range	-40 to 125,0 to 125 C
Output Capacitor Type	Non-Ceramic
Output Options	Adjustable Output,Fixed Output
PSRR @ 100KHz	47 dB
Package Group	TO-252
Package Size: mm2:W x L	3TO-252: 65 mm2: 9.91 x 6.58(TO-252) PKG
Rating	Catalog
Regulated Outputs	1
Special Features	N/A
Thermal Resistance ОёJA	24 В°C/W
Vdo(Typ)	1200 mV
Vin(Max)	15 V
Vin(Min)	2.6 V
Vout(Max)	13.8 V
Vout(Min)	1.25 V

Plan ecológico

RoHS

Obediente

Kits de diseño y Módulos de evaluación

Evaluation Modules & Boards: DLPDLCR4710EVM-G2
Full HD DLP4710 Chipset Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
- Descargar

Notas de aplicación

Descargar
A Topical Index of TI LDO Application Notes (Rev. F)
PDF, 82 Kb, Revisión: F, Archivo publicado: jun 27, 2019
Descargar
Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)
PDF, 509 Kb, Revisión: A, Archivo publicado: jun 4, 2008
Descargar
Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A)
PDF, 284 Kb, Revisión: A, Archivo publicado: mayo 5, 2013
When working with voltage regulator circuits the designer is often confronted with the need to calculatethe tolerance of the regulated output voltage. For fixed voltage regulators this problem is easily managedbecause the required information is directly supplied on the semiconductor manufacturer's data sheet.
Descargar
Linear power for automated industrial systems
PDF, 1.8 Mb, Archivo publicado: enero 9, 2015
Designing a robust power management system for industrial automated equipment requires thorough understanding of the surroundings and conditions that affect the functionality. During the past few decades industrial and factory automation systems have become more robust intelligent and connected which has drastically increased the footprint for semiconductor components. This change has created a
Descargar
AN-182 Improving Power Supply Reliability with IC Power Regulators (Rev. B)
PDF, 82 Kb, Revisión: B, Archivo publicado: mayo 5, 2013
This application report discusses improving power supply reliability with IC power regulators.
Descargar
AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B)
PDF, 300 Kb, Revisión: B, Archivo publicado: mayo 6, 2013
This application note discusses the operation and compensation of linear regulators.
Descargar
AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A)
PDF, 814 Kb, Revisión: A, Archivo publicado: mayo 6, 2013
The LM340-XX are three terminal 1.0A positive voltage regulators with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However by adding a few parts one may improve the transient response provide for avariable output voltage or increase the output current. Included on the chip are all of t
Descargar
AN-181 3-Terminal Regulator is Adjustable (Rev. B)
PDF, 314 Kb, Revisión: B, Archivo publicado: mayo 5, 2013
Until now all of the 3-terminal power IC voltage regulators have a fixed output voltage. In spite of this limitation their ease of use low cost and full on-chip overload protection have generated wide acceptance. Now with the introduction of the LM117 it is possible to use a single regulator for any output voltage from 1.2 V to 37 V at 1.5A. Selecting close-tolerance outp
Descargar
Understanding the Terms and Definitions of LDO Voltage Regulators
PDF, 197 Kb, Archivo publicado: oct 21, 1999
This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab
Descargar
AN-1028 Maximum Power Enhancement Techniques for Power Packages (Rev. B)
PDF, 684 Kb, Revisión: B, Archivo publicado: mayo 6, 2013
The purpose of this application report is to aid the user in maximizing the power handling capability of Texas Instruments power packages by using the SOT-223 as an example.
Descargar
AN-1482 LDO Regulator Stability Using Ceramic Output Capacitors (Rev. A)
PDF, 169 Kb, Revisión: A, Archivo publicado: abr 25, 2013
Ultra-low ESR capacitors such as ceramics are highly desirable because they can support fast-changingload transients and also bypass very high frequency noise coming from switching converter powersources which a linear regulator can not reject. However using ultra-low ESR capacitors on the output ofan LDO regulator requires that specific design changes be implemented to ensure loop stabili
Descargar
LDO PSRR Measurement Simplified (Rev. A)
PDF, 131 Kb, Revisión: A, Archivo publicado: agosto 9, 2017
This applicationreportexplainsdifferentmethodsof measuringthe PowerSupplyRejectionRatio(PSRR)of a Low-Dropout(LDO)regulatorand includesthe prosand consof thesemeasuringmethods
Descargar
Packaging Limits Range of Linear Regulators
PDF, 75 Kb, Archivo publicado: mayo 8, 2010
The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.

Linea modelo

Serie: LM1117 (49)

LM1117DT-1.8/NOPB LM1117DT-2.5/NOPB LM1117DT-3.3/NOPB LM1117DT-5.0/NOPB LM1117DT-ADJ/NOPB LM1117DTX-1.8/NOPB LM1117DTX-2.5/NOPB LM1117DTX-3.3/NOPB LM1117DTX-5.0/NOPB LM1117DTX-ADJ/NOPB LM1117IDT-3.3/NOPB LM1117IDT-5.0/NOPB LM1117IDT-ADJ/NOPB LM1117IDTX-3.3/NOPB LM1117IDTX-5.0/NOPB LM1117IDTX-ADJ/NOPB LM1117ILD-ADJ/NOPB LM1117IMP-3.3/NOPB LM1117IMP-5.0/NOPB LM1117IMP-ADJ/NOPB LM1117IMPX-3.3/NOPB LM1117IMPX-5.0/NOPB LM1117IMPX-ADJ/NOPB LM1117LD-1.8/NOPB LM1117LD-2.5/NOPB LM1117LD-3.3/NOPB LM1117LD-ADJ/NOPB LM1117LDX-1.8 LM1117LDX-1.8/NOPB LM1117LDX-ADJ/NOPB LM1117MP-1.8/NOPB LM1117MP-2.5/NOPB LM1117MP-3.3/NOPB LM1117MP-5.0/NOPB LM1117MP-ADJ/NOPB LM1117MPX-1.8/NOPB LM1117MPX-2.5/NOPB LM1117MPX-3.3 LM1117MPX-3.3/NOPB LM1117MPX-5.0/NOPB LM1117MPX-ADJ/NOPB LM1117S-ADJ/NOPB LM1117SX-3.3/NOPB LM1117SX-5.0/NOPB LM1117SX-ADJ/NOPB LM1117T-2.5/NOPB LM1117T-3.3/NOPB LM1117T-5.0/NOPB LM1117T-ADJ/NOPB

Clasificación del fabricante

Semiconductors > Power Management > Linear Regulator (LDO) > Single Channel LDO

Otros nombres:

LM1117DTXADJ/NOPB, LM1117DTX ADJ/NOPB