Datasheet Texas Instruments TS3L110PWR — Ficha de datos
Fabricante | Texas Instruments |
Serie | TS3L110 |
Numero de parte | TS3L110PWR |
Quad SPDT High-Bandwidth 10/100 Base-T Lan Switch Differential 8 to 4 Multiplexer / Demultiplexer 16-TSSOP -40 to 85
Hojas de datos
Precios
Estado
Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
Disponibilidad de muestra del fabricante | Sí |
Embalaje
Pin | 16 |
Package Type | PW |
Industry STD Term | TSSOP |
JEDEC Code | R-PDSO-G |
Package QTY | 2000 |
Carrier | LARGE T&R |
Device Marking | TK110 |
Width (mm) | 4.4 |
Length (mm) | 5 |
Thickness (mm) | 1 |
Pitch (mm) | .65 |
Max Height (mm) | 1.2 |
Mechanical Data | Descargar |
Paramétricos
Additional Features | Powered off protection |
Bandwidth | 500 MHz |
Bandwidth(Max) | 500 MHz |
Configuration | 2:1 SPDT |
Crosstalk | -26 dB |
ESD Charged Device Model | 1 kV |
ESD HBM(Typ) | 2 kV |
ICC(Max) | 1500 uA |
ICC(Typ) | 700 uA |
Input/Ouput Voltage(Max) | 5.5 V |
Input/Output Continuous Current(Max) | 128 mA |
Input/Output OFF-state Capacitance(Typ) | 5.5 pF |
Input/Output ON-state Capacitance(Typ) | 10.5 pF |
Number of Channels | 4 |
OFF-state leakage current(Max) | 1 µA |
Off Isolation(Typ) | -28 dB |
Operating Temperature Range | -40 to 85 C |
Package Group | TSSOP |
Package Size: mm2:W x L | 16TSSOP: 32 mm2: 6.4 x 5(TSSOP) PKG |
Propagation Delay | 0.25 ns |
Protocols | 10 BASE-T,100 Base-T |
RON Flatness(Typ) | 1 Ohms |
Ron Channel Match(Max) | 0.9 Ω |
Ron(Max) | 8 Ohms |
Ron(Typ) | 4 Ohms |
Turn off Time (Disable)(Max) | 5 ns |
Turn on Time (Enable)(Max) | 7 ns |
VCC(Max) | 3.6 V |
VCC(Min) | 3 V |
VIH(Min) | 2 V |
VIL(Max) | 0.8 V |
Plan ecológico
RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: EVMK2G
66AK2Gx (K2G) Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Preventing Excess Power Consumption on Analog SwitchesPDF, 238 Kb, Archivo publicado: jul 3, 2008
Analog switches are extensively used for switching audio signals in battery-powered applications, such as mobile phones. In any cases, the switch is powered directly from the battery, but it receives control signals from a lower voltage processor GPIO. For most analog switches, this application condition leads to an excess supply current draw that catches system designers by surprise. This applica
Linea modelo
Serie: TS3L110 (14)
Clasificación del fabricante
- Semiconductors > Switches and Multiplexers > Protocol Specific Switches/Muxes