Datasheet Texas Instruments TS5A3166DCKR — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | TS5A3166 |
| Numero de parte | TS5A3166DCKR |
Conmutador analógico SPST de 1 ohm 5-V / 3.3-V Conmutador analógico de un canal 5-SC70 -40 a 85
Hojas de datos
TS5A3166 0.9-О© SPST Analog Switch datasheet
PDF, 1.2 Mb, Revisión: D, Archivo publicado: feb 1, 2016
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 5 | 5 | 5 |
| Package Type | DCK | DCK | DCK |
| Industry STD Term | SOT-SC70 | SOT-SC70 | SOT-SC70 |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 3000 | 3000 | 3000 |
| Carrier | LARGE T&R | LARGE T&R | LARGE T&R |
| Device Marking | JFF | JF5 | JFR |
| Width (mm) | 1.25 | 1.25 | 1.25 |
| Length (mm) | 2 | 2 | 2 |
| Thickness (mm) | .9 | .9 | .9 |
| Pitch (mm) | .65 | .65 | .65 |
| Max Height (mm) | 1.1 | 1.1 | 1.1 |
| Mechanical Data | Descargar | Descargar | Descargar |
Paramétricos
| Additional Features | Powered off protection,Break-before-make |
| Bandwidth | 200 MHz |
| Bandwidth(Max) | 200 MHz |
| Configuration | 1:1 SPST |
| ESD Charged Device Model | 1 kV |
| ESD HBM | 2 kV |
| Input/Ouput Voltage(Max) | 5.5 V |
| Input/Output Continuous Current(Max) | 200 mA |
| Input/Output OFF-state Capacitance(Typ) | 19.5 pF |
| Input/Output ON-state Capacitance(Typ) | 36.5 pF |
| Number of Channels | 1 |
| OFF-state leakage current(Max) | 0.1 µA |
| ON-state leakage current(Max) | 0.02 µA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | SC70 |
| Package Size: mm2:W x L | 5SC70: 4 mm2: 2.1 x 2(SC70) PKG |
| Rating | Catalog |
| Ron(Max) | 4 Ohms |
| Ron(Typ) | 0.7 Ohms |
| Supply Current(Max) | 0.8 uA |
| Supply Current(Typ) | 0.001 uA |
| Supply Range | 5.5 Max |
| VIH(Min) | 1.5 V |
| VIL(Max) | 0.8 V |
| Vdd(Max) | 5.5 V |
| Vdd(Min) | 1.65 V |
| Vss(Max) | N/A V |
| Vss(Min) | N/A V |
Plan ecológico
| RoHS | Obediente |
Notas de aplicación
- Preventing Excess Power Consumption on Analog SwitchesPDF, 238 Kb, Archivo publicado: jul 3, 2008
Analog switches are extensively used for switching audio signals in battery-powered applications, such as mobile phones. In any cases, the switch is powered directly from the battery, but it receives control signals from a lower voltage processor GPIO. For most analog switches, this application condition leads to an excess supply current draw that catches system designers by surprise. This applica
Linea modelo
Serie: TS5A3166 (7)
Clasificación del fabricante
- Semiconductors > Switches and Multiplexers > Analog Switches/Muxes