Datasheet Texas Instruments TPS60203DGSR — Ficha de datos
Fabricante | Texas Instruments |
Serie | TPS60203 |
Numero de parte | TPS60203DGSR |
Bomba regulada de carga de baja ondulación de 3.3 V con indicador de alimentación buena 10-VSSOP -40 a 85
Hojas de datos
TPS6020x Regulated 3.3 V, 100-mA Low-Ripple Charge Pump Low Power DC/DC Converters datasheet
PDF, 1.2 Mb, Revisión: A, Archivo publicado: abr 25, 2016
Extracto del documento
Precios
Estado
Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
Disponibilidad de muestra del fabricante | No |
Embalaje
Pin | 10 |
Package Type | DGS |
Industry STD Term | VSSOP |
JEDEC Code | S-PDSO-G |
Package QTY | 2500 |
Carrier | LARGE T&R |
Device Marking | AFA |
Width (mm) | 3 |
Length (mm) | 3 |
Thickness (mm) | 1.02 |
Pitch (mm) | .5 |
Max Height (mm) | 1.07 |
Mechanical Data | Descargar |
Paramétricos
Iout(Max) | 0.05 A |
Iq(Typ) | 0.04 mA |
Operating Temperature Range | -40 to 85 C |
Package Group | VSSOP |
Rating | Catalog |
Regulated Outputs | 1 |
Special Features | Enable,Frequency Synchronization,Power Good |
Switching Frequency(Max) | 400 kHz |
Switching Frequency(Min) | 200 kHz |
Type | Charge Pump |
Vin(Max) | 3.6 V |
Vin(Min) | 1.8 V |
Vout(Max) | 3.3 V |
Vout(Min) | 3.3 V |
Plan ecológico
RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: TPS60200EVM-145
Evaluation module for 2 battery cells to 3.3V, 100mA low-ripple charge pump in 10-pin MSOP
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Extending the Soft Start Time Without a Soft Start Pin (Rev. B)PDF, 387 Kb, Revisión: B, Archivo publicado: jun 15, 2017
- Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain OutputsPDF, 130 Kb, Archivo publicado: sept 19, 2011
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, Revisión: A, Archivo publicado: dic 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
Linea modelo
Serie: TPS60203 (2)
- TPS60203DGS TPS60203DGSR
Clasificación del fabricante
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Charge Pump (Inductorless)