Datasheet Texas Instruments LM6142BIN/NOPB — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | LM6142 |
| Numero de parte | LM6142BIN/NOPB |
Amplificador operacional dual de alta velocidad / baja potencia de 17 MHz Riel a riel E / S 8-PDIP -40 a 85
Hojas de datos
LM6142/LM6144 17В MHz Rail-to-Rail Input-Output Operational Amplifiers datasheet
PDF, 1.5 Mb, Revisión: D, Archivo publicado: marzo 13, 2013
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 8 | 8 |
| Package Type | P | P |
| Industry STD Term | PDIP | PDIP |
| JEDEC Code | R-PDIP-T | R-PDIP-T |
| Package QTY | 40 | 40 |
| Carrier | TUBE | TUBE |
| Device Marking | LM6142 | BIN |
| Width (mm) | 6.35 | 6.35 |
| Length (mm) | 9.81 | 9.81 |
| Thickness (mm) | 3.9 | 3.9 |
| Pitch (mm) | 2.54 | 2.54 |
| Max Height (mm) | 5.08 | 5.08 |
| Mechanical Data | Descargar | Descargar |
Paramétricos
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 84 dB |
| CMRR(Typ) | 107 dB |
| GBW(Typ) | 17 MHz |
| Input Bias Current(Max) | 280000 pA |
| Iq per channel(Max) | 0.8 mA |
| Iq per channel(Typ) | 0.65 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 3 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 8 mA |
| Package Group | PDIP |
| Package Size: mm2:W x L | See datasheet (PDIP) PKG |
| Rail-to-Rail | In,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 25 V/us |
| Total Supply Voltage(Max) | 24 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 1.8 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 16 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 1 mV |
Plan ecológico
| RoHS | Obediente |
Notas de aplicación
- Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)PDF, 81.7 Mb, Revisión: B, Archivo publicado: abr 22, 2013
This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits. - AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)PDF, 165 Kb, Revisión: A, Archivo publicado: abr 26, 2013
It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or
Linea modelo
Serie: LM6142 (9)
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps