Datasheet Texas Instruments TM4C1294NCPDTT3R — Ficha de datos
Fabricante | Texas Instruments |
Serie | TM4C1294NCPDT |
Numero de parte | TM4C1294NCPDTT3R |
IoT habilitado MCU basado en ARM® Cortex®-M4F de 32 bits de alto rendimiento 128-TQFP -40 a 105
Hojas de datos
Tiva C Series TM4C1294NCPDT Microcontroller Data Sheet datasheet
PDF, 9.9 Mb, Revisión: B, Archivo publicado: jun 19, 2014
Extracto del documento
Precios
Estado
Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
Disponibilidad de muestra del fabricante | No |
Embalaje
Pin | 128 | 128 |
Package Type | PDT | PDT |
Industry STD Term | TQFP | TQFP |
JEDEC Code | S-PQFP-G | S-PQFP-G |
Package QTY | 1000 | 1000 |
Device Marking | TM4C129 | 4NCPDTT3 |
Width (mm) | 14 | 14 |
Length (mm) | 14 | 14 |
Thickness (mm) | 1 | 1 |
Pitch (mm) | .4 | .4 |
Max Height (mm) | 1.2 | 1.2 |
Mechanical Data | Descargar | Descargar |
Paramétricos
10/100 ENET MAC | No |
10/100 ENET MAC+PHY | Yes |
ADC Channels | 20 |
ADC Resolution | 12 Bits |
Bi- and Quad- SSI/SPI | Yes |
CAN MAC | 2 |
CPU | ARM Cortex-M4F |
EEPROM | 6 KB |
External Peripheral Interface | Yes |
Flash | 1024 KB |
Frequency | 120 MHz |
GPIO | 90 |
I2C | 10 |
I2S | No |
LCD | No |
LCD Controller | No |
Max Speed | 120 MHz |
Motion PWM Outputs | 8 |
Non-volatile Memory | 6 KB |
Operating Temperature Range | -40 to 105,-40 to 85 C |
Package Group | TQFP |
Package Size: mm2:W x L | 128TQFP: 256 mm2: 16 x 16(TQFP) PKG |
Pin & Package | 128TQFP |
Pin/Package | 128TQFP |
QEI | 1 |
RAM | 256 KB |
RTC | Yes |
Rating | Catalog |
SPI | 4 |
SRAM | 256 kB |
SSI/SPI | 4 |
Security | No HW accelerator |
SysTick | Yes |
UART | 8 |
USB D, H/D, or OTG | OTG |
USB High-Speed with ULPI | Yes |
Watchdog Timers | 2 |
Plan ecológico
RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: ADS122U04EVM
ADS122U04 Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: CC-DEVPACK-DEBUG
SimpleLink SensorTag Debugger DevPack
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: LAUNCHXL-CC1350-4
CC1350 Dualband Launchpad for 433MHz/2.4GHz Applications
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: MSP-EXP432P401R
SimpleLinkВ™ MSP432P401R LaunchPadВ™ Development Kit
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Development Kits: DK-TM4C129X
IoT Enabled ARMВ® CortexВ®-M4F MCU TM4C129X Connected Development Kit
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: ADS124S08EVM
ADS124S08 Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: EK-TM4C129EXL
ARMВ® CortexВ®-M4F-Based MCU TM4C129E Crypto Connected LaunchPadв„ў for IoT Applications
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: EK-TM4C1294XL
ARMВ® CortexВ®-M4F-Based MCU TM4C1294 Connected LaunchPadв„ў
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: ADS127L01EVM
ADS127L01 Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: ADS114S08EVM
ADS114S08 Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: IWR1443BOOST
IWR1443 Single-Chip 76-to-81GHz mmWave Sensor Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: AWR1243BOOST
AWR1243 76-to-81GHz High-Performance Automotive Radar Sensor Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: AWR1443BOOST
AWR1443 Single-Chip 76-to-81GHz Automotive Radar Sensor Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: AWR1642BOOST
AWR1642 Single-Chip 76-to-81GHz Automotive Radar Sensor Integrating DSP and MCU Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: IWR1642BOOST
IWR1642 Single-Chip 76-to-81GHz mmWave Sensor Integrating DSP and MCU Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - JTAG Emulators/ Analyzers: TMDSEMU100V2U-ARM
XDS100v2 JTAG Debug Probe (ARM version)
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - JTAG Emulators/ Analyzers: TMDSEMU100V2U-20T
XDS100v2 JTAG Debug Probe (20-pin cTI version)
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - JTAG Emulators/ Analyzers: TMDSEMU100V2U-14T
XDS100v2 JTAG Debug Probe (14-pin TI version)
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - JTAG Emulators/ Analyzers: TMDSEMU200-U
XDS200 USB Debug Probe
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - JTAG Emulators/ Analyzers: TMDSEMU560V2STM-UE
XDS560v2 System Trace USB & Ethernet Debug Probe
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - JTAG Emulators/ Analyzers: TMDSEMU560V2STM-U
XDS560v2 System Trace USB Debug Probe
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Serial to Ethernet Converter for TM4C129x Microcontrollers Using RTOSPDF, 1.5 Mb, Archivo publicado: marzo 31, 2015
Some legacy products may only contain a serial port and accessing such products is increasingly becoming a challenge due to the inability to add multiple such products to a shared network and the inability to access the legacy product from long distances. A serial-to-Ethernet converter provides a simple solution to solve the above challenges. The software described in this application report allow - Differences Between Stellaris Tempest & Firestorm-Class MCUs and Tiva TM4C129xPDF, 162 Kb, Archivo publicado: oct 22, 2013
This document addresses design considerations when migrating working designs from Tempest- and Firestorm-class Stellaris microcontrollers to Tiva TM4C129x microcontrollers. Topics covered include both software and hardware differences as well as feature changes and enhancements. All software differences are comprehended in the Driver Library APIs that are part of StellarisWareВ® and TivaWare&tr - Implementing OPUS Voice Code for TM4C129x DevicePDF, 3.1 Mb, Archivo publicado: jun 20, 2016
Opus is an open source, royalty-free audio compression format developed by Xiph and standardized by the IETF. It utilizes lossy compression which is designed to efficiently code audio with a low latency making it suitable for real time communication. Opus replaces both the Vorbis and Speex codecs, and is intended for storage and streaming applications. Its low complexity allows it to be run effici - Using Feature Set of I2C on TM4C129x MicrocontrollersPDF, 1.7 Mb, Archivo publicado: jul 28, 2015
The inter-integrated circuit (I2C) is a multi-master, multi-slave, single-ended bus that is typically used forattaching lower speed peripheral ICs to processors and microcontrollers. The type of slave devices range from non-volatile memory to data-acquisition devices like analog-to-digital converters (ADC), sensors, and so forth. This application report demonstrates how to use the feature rich I - Differences Between Tiva C Series TM4C MicrocontrollersPDF, 121 Kb, Archivo publicado: oct 22, 2013
This document addresses design considerations when migrating working designs between Tiva C Series TM4C123x and TM4C129x microcontrollers. While most modules shared among the devices are largely the same, some feature enhancements are worth noting. This document describes software and hardware differences for both feature changes and enhancements. All software differences are comprehended in the T - 1-Wire Enumeration (Rev. B)PDF, 93 Kb, Revisión: B, Archivo publicado: abr 26, 2016
application report describes the 1-Wire communication protocol, available TivaWareв„ў for C Series APIs for the 1-Wire module in Tivaв„ў C Series microcontrollers and an example enumeration algorithm using binary tree search. - System Design Guidelines for the TM4C129x Family of Tiva C Series MCUsPDF, 1.4 Mb, Archivo publicado: jul 16, 2013
TM4C129x MCUs Tivaв„ў C Series TM4C129x System Design Guidelines - Diagnosing Software Faults in StellarisВ® MicrocontrollersPDF, 1.9 Mb, Archivo publicado: jun 4, 2012
During typical development efforts, system operation can sometimes end up in a fault handler. At first glance, faults might seem cryptic or difficult to understand, but Stellaris microcontrollers include several features to help determine why a fault occurred. Read this application note to learn about the fault handling capabilities of Stellaris microcontrollers, how to diagnose faults, and how to - Using TM4C12x Devices Over JTAG InterfacePDF, 1.9 Mb, Archivo publicado: agosto 18, 2016
The IEEE Standard 1149.1-1990, IEEE Standard Test Access Port and Boundary-Scan Architecture (JTAG) is a method for verifying designs and testing printed circuit boards after assembly. It is used as the primary means for transferring data to a nonvolatile memory of an embedded system and debugging embedded software.This application report describes the physical connections for JTAG and desi - StellarisВ® Graphics Library Display Drivers (AN01287) (Rev. A)PDF, 67 Kb, Revisión: A, Archivo publicado: jul 9, 2013
The Stellaris Graphics Library (grlib) offers a compact yet powerful collection of graphics functions allowing the development of compelling user interfaces on small monochrome or color displays attached to Stellaris microcontrollers. This application report describes how to support a new display device in the Stellaris Graphics Library. - Migrating Software Projects from StellarisWare to TivaWare for C Series Software (Rev. A)PDF, 92 Kb, Revisión: A, Archivo publicado: mayo 1, 2013
As TI launches the Tivaв„ў family of 32-bit ARMВ® Cortexв„ў-M4 microcontrollers (MCUs), the StellarisWareВ® suite of comprehensive software tools is also migrating to TivaWareв„ў. This new software platform offers the same features found in earlier versions, but a few changes have been made in the migration process that require simple modifications to be made in existing StellarisWare applications in orde - Transitioning Designs From Stellaris LM3S Microcontrollers to Tiva C Series MCUs (Rev. A)PDF, 104 Kb, Revisión: A, Archivo publicado: oct 22, 2013
This application report addresses design considerations when migrating working designs from Stellaris LM3S microcontrollers to Tiva C Series microcontrollers. Topics covered include software and hardware considerations as well as feature changes and enhancements. Software migration is very straightforward when using the Driver Library APIs in the StellarisWareВ® and TivaWareв„ў for C Series - System Design Guidelines for the TM4C123x Family of Tiva C Series MCUsPDF, 1.5 Mb, Archivo publicado: jul 31, 2013
- Using the CMSIS DSP Library in Code Composer Studio for TM4C MCUs (Rev. G)PDF, 3.0 Mb, Revisión: G, Archivo publicado: oct 7, 2015
This application report describes the process required to build the ARMВ® CMSIS DSP library in Code Composer Studio v6.1 with ARM Compiler version up to 5.2.5. This document also describes how to use Code Composer Studio v6.1 to build, run, and verify the 11 ARM DSP example projects that are included in the CMSIS package. - Dual-SPI Emulating IВІS on Tivaв„ў C Series TM4C123x MCUs (Rev. B)PDF, 436 Kb, Revisión: B, Archivo publicado: jun 12, 2013
This application report presents an example using two serial peripheral interfaces (SPIs) to emulate an integrated interchip sound (I2S) peripheral on the StellarisВ® LM4F232 (Tiva C series TM4C123GH6PGE) microcontroller. Utilizing the sound API, .wav audio files stored in the on-board SD card are played via pseudo-I2S to an external Texas Instruments' TLV320AIC3107 codec. This generic software pla - Powering Cortex-M4 MCUs Using the High Efficiency DCS-Control TopologyPDF, 164 Kb, Archivo publicado: feb 3, 2013
The new Tiva C Series ARMВ® Cortexв„ў-M4 family of versatile microcontrollers provides prolific connectivity peripherals, such as the industry's first integrated Ethernet MAC and PHY, advanced analog integration and hardware floating-point performance. This application report presents an ultra-low IQ (4.8 ОјA) power supply solution for Tiva C Series devices using the TPS62177, a high efficiency synchr - Using SYS/BIOS with StellarisВ® ARMВ® Cortexв„ў-M3 Microcontrollers (Rev. A)PDF, 1.4 Mb, Revisión: A, Archivo publicado: nov 19, 2012
This document provides a brief overview of the Texas Instruments’ SYS/BIOS Real-Time Operating System (RTOS) and outlines how to implement SYS/BIOS on the StellarisВ® Cortexв„ў-M3 family of microcontrollers. In addition to setting up and running an example project provided within the SYS/BIOS software package, this document outlines the process of creating a new SYS/BIOS project with the Code Compose - Stellaris Application Update Using Stellaris USB DFU Class (AN01273) (Rev. A)PDF, 116 Kb, Revisión: A, Archivo publicado: jul 8, 2013
This application report provides a brief overview of the Device Firmware Upgrade (DFU) class, describes the Stellaris implementation in the USB boot loader (boot_usb) application, and also describes the hostside lmdfu dynamic link library for Windows. Use of the standard USB DFU class on Stellaris USBenabled microcontrollers offers a convenient and fast method of replacing main application image - ADC Oversampling Techniques for Stellaris Microcontrollers (AN01239) (Rev. A)PDF, 95 Kb, Revisión: A, Archivo publicado: enero 8, 2013
Some members of the Stellaris microcontroller family have an analog-to-digital converter (ADC) module. The hardware resolution of the ADC is 10 bits; however, due to noise and other accuracy diminishing factors, the true accuracy is less than 10 bits. This application report provides a software-based oversampling technique, resulting in an improved effective number of bits (ENOB) in the conversion - Using Execute, Write/Erase Flash Protection on Stellaris MCUs Using CCS (Rev. A)PDF, 1.7 Mb, Revisión: A, Archivo publicado: agosto 15, 2012
Protection of code and IP in a microcontroller's Flash memory has always been an important consideration for the system designers. StellarisВ® microcontrollers feature a code protection mechanism that enables developers to protect their code and IP in the end application, while providing the flexibility to upgrade the firmware using a boot loader. This application report describes using Flash p - Software UART for Stellaris Microcontrollers (AN01270)PDF, 77 Kb, Archivo publicado: jul 7, 2009
This application note looks at implementing a software-based UART which, using general-purpose input/outputs (GPIO), allows the user to overcome hardware limitations or lack of dedicated peripherals.
Linea modelo
Serie: TM4C1294NCPDT (4)
- TM4C1294NCPDTI3 TM4C1294NCPDTI3R TM4C1294NCPDTT3 TM4C1294NCPDTT3R
Clasificación del fabricante
- Semiconductors > Microcontrollers (MCU) > Performance MCUs > Control + Automation > TM4C12x