Datasheet Texas Instruments SN74CBTS6800DGVR — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | SN74CBTS6800 |
| Numero de parte | SN74CBTS6800DGVR |
Conmutador de bus FET de 10 bits con salidas precargadas y sujeción de diodo Schottky 24-TVSOP -40 a 85
Hojas de datos
10-Bit FET Bus Switch With Precharged Outputs And Schottky Diode Clamping datasheet
PDF, 730 Kb, Revisión: C, Archivo publicado: oct 20, 2000
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 24 |
| Package Type | DGV |
| Industry STD Term | TVSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | CS6800 |
| Width (mm) | 4.4 |
| Length (mm) | 5 |
| Thickness (mm) | 1.05 |
| Pitch (mm) | .4 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Descargar |
Paramétricos
| Additional Features | Pre-charged signal path, Schottky clamp diode to prevent undershoot |
| Bandwidth | 200 MHz |
| Configuration | 1:1 SPST |
| Input/Ouput Voltage(Max) | 5.5 V |
| Input/Output Continuous Current(Max) | 128 mA |
| Input/Output OFF-state Capacitance(Typ) | 4.5 pF |
| Number of Channels | 10 |
| Operating Temperature Range | -40 to 85 C |
| Package Group | TVSOP |
| Package Size: mm2:W x L | 24TVSOP: 32 mm2: 6.4 x 5(TVSOP) PKG |
| Rating | Catalog |
| Ron(Max) | 20 Ohms |
| Ron(Typ) | 3 Ohms |
| Supply Current(Max) | 2500 uA |
| Supply Current(Typ) | 2.5 uA |
| Supply Range | 5.5 Max |
| VIH(Min) | 2 V |
| VIL(Max) | 0.8 V |
| Vdd(Max) | 5.5 V |
| Vdd(Min) | 4 V |
| Vss(Max) | N/A V |
| Vss(Min) | N/A V |
Plan ecológico
| RoHS | Obediente |
Notas de aplicación
- FET Switches in Docking StationsPDF, 92 Kb, Archivo publicado: jul 23, 2003
Docking stations for portable electronics require the capability to connect a system with a live-running bus to a disabled or powered-down system. This hot-docking event must not cause any electrical damage, electrical signal glitches, or data corruption. This application report explains the use of TI FET bus-switch products with precharge to accomplish this connection. - Flexible Voltage-Level Translation With CBT Family DevicesPDF, 40 Kb, Archivo publicado: jul 20, 1999
Voltage translation between buses with incompatible logic levels can be accomplished using Texas Instruments (TI) translation-voltage clamps (TVC) or standard crossbar technology (CBT) devices. CBT devices in this application offer flexibility in designs, protection of circuits that are sensitive to high-state voltage-level overshoots, and cost efficiency. - 5-V To 3.3-V Translation With the SN74CBTD3384 (Rev. B)PDF, 35 Kb, Revisión: B, Archivo publicado: marzo 1, 1997
The emergence of low-voltage technology required existing 5-V systems to interact with 3.3-V systems. Compatibility issues of mixed-mode operation created the need for 5-V to 3.3-V translation. Buffers and transceivers serve as effective translators. While providing additional drive, these devices also add propagation delay and require directional control. In cases where additional drive is not - 3.3-V to 2.5-V Translation with Texas Instruments Crossbar Technology (Rev. A)PDF, 32 Kb, Revisión: A, Archivo publicado: abr 3, 1998
- VOLTAGE LEVEL TRANSLATION (SL) - FamilyPDF, 111 Kb, Archivo publicado: sept 21, 2011
- Bus FET Switch Solutions for Live Insertion ApplicationsPDF, 300 Kb, Archivo publicado: feb 7, 2003
In today?s competitive computing and networking industry, any equipment downtime due to component interconnects or bus failures impedes communication, hinders productivity and hampers financial growth. In recognizing this increasingly costly unplanned downtime, the industry introduced live-insertion technology to minimize the impact of any such failures. The live-insertion feature enables a networ
Linea modelo
Serie: SN74CBTS6800 (2)
- SN74CBTS6800DGVR SN74CBTS6800PWR
Clasificación del fabricante
- Semiconductors > Switches and Multiplexers > Analog Switches/Muxes