Datasheet Texas Instruments SN74LVCH162244ADGGR — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | SN74LVCH162244A |
| Numero de parte | SN74LVCH162244ADGGR |
Memoria intermedia / controlador de 16 bits con salidas de 3 estados 48-TSSOP -40 a 85
Hojas de datos
SN74LVCH162244A 16-Bit Buffer/Driver with 3-State Outputs datasheet
PDF, 784 Kb, Revisión: L, Archivo publicado: mayo 2, 2014
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Obsoleto (El fabricante ha interrumpido la producción del dispositivo) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 48 |
| Package Type | DGG |
| Industry STD Term | TSSOP |
| JEDEC Code | R-PDSO-G |
| Width (mm) | 6.1 |
| Length (mm) | 12.5 |
| Thickness (mm) | 1.15 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Descargar |
Reemplazos
| Replacement | SN74LVCH162244AGR |
| Replacement Code | S |
Paramétricos
| Approx. Price (US$) | 0.49 | 1ku |
| Bits(#) | 16 |
| F @ Nom Voltage(Max)(Mhz) | 100 |
| ICC @ Nom Voltage(Max)(mA) | 0.02 |
| Input Type | TTL/CMOS |
| Operating Temperature Range(C) | -40 to 125 |
| Output Drive (IOL/IOH)(Max)(mA) | -12/12 |
| Output Type | LVTTL |
| Package Group | TSSOP |
| Package Size: mm2:W x L (PKG) | 48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP) |
| Rating | Catalog |
| Schmitt Trigger | No |
| Technology Family | LVC |
| VCC(Max)(V) | 3.6 |
| VCC(Min)(V) | 1.65 |
| Voltage(Nom)(V) | 1.8 2.5 2.7 3.3 |
| tpd @ Nom Voltage(Max)(ns) | 10.2 6.4 5.6 4.4 |
Plan ecológico
| RoHS | Desobediente |
| Pb gratis | No |
Notas de aplicación
- Simultaneous-Switching Performance of TI Logic Devices (Rev. B)PDF, 378 Kb, Revisión: B, Archivo publicado: feb 23, 2005
Simultaneous-switching noise can generate and propagate glitches in electronic systems. Therefore, system designers are faced with challenges to minimize simultaneous-switching noise, while increasing switching speed and improving signal quality. This report presents the performance of different TI logic devices under various simultaneous-switching conditions. Factors such as the number of bits sw - Bus-Hold CircuitPDF, 418 Kb, Archivo publicado: feb 5, 2001
When designing systems that include CMOS devices, designers must pay special attention to the operating condition in which all of the bus drivers are in an inactive, high-impedance condition (3-state). Unless special measures are taken, this condition can lead to undefined levels and, thus, to a significant increase in the device?s power dissipation. In extreme cases, this leads to oscillation of
Linea modelo
Serie: SN74LVCH162244A (8)
Clasificación del fabricante
- Semiconductors > Logic > Buffer/Driver/Transceiver > Non-Inverting Buffer/Driver